Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits)
  [SCSI] scsi_dh_rdac: Add MD36xxf into device list
  [SCSI] scsi_debug: add consecutive medium errors
  [SCSI] libsas: fix ata list corruption issue
  [SCSI] hpsa: export resettable host attribute
  [SCSI] hpsa: move device attributes to avoid forward declarations
  [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)
  [SCSI] sd: Logical Block Provisioning update
  [SCSI] Include protection operation in SCSI command trace
  [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
  [SCSI] target: Fix volume size misreporting for volumes > 2TB
  [SCSI] bnx2fc: Broadcom FCoE offload driver
  [SCSI] fcoe: fix broken fcoe interface reset
  [SCSI] fcoe: precedence bug in fcoe_filter_frames()
  [SCSI] libfcoe: Remove stale fcoe-netdev entries
  [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h
  [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument
  [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs
  [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out"
  [SCSI] libfc: Fixing a memory leak when destroying an interface
  [SCSI] megaraid_sas: Version and Changelog update
  ...

Fix up trivial conflicts due to whitespace differences in
drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}

Documentation/scsi/ChangeLog.megaraid_sas

@@ -1,3 +1,26 @@
+Release Date    : Thu. Feb 24, 2011 17:00:00 PST 2010 -
+			(emaild-id:megaraidlinux@lsi.com)
+			Adam Radford
+Current Version : 00.00.05.34-rc1
+Old Version     : 00.00.05.29-rc1
+    1. Fix some failure gotos from megasas_probe_one(), etc.
+    2. Add missing check_and_restore_queue_depth() call in
+       complete_cmd_fusion().
+    3. Enable MSI-X before calling megasas_init_fw().
+    4. Call tasklet_schedule() even if outbound_intr_status == 0 for MFI based
+       boards in MSI-X mode.
+    5. Fix megasas_probe_one() to clear PCI_MSIX_FLAGS_ENABLE in msi control
+       register in kdump kernel.
+    6. Fix megasas_get_cmd() to only print "Command pool empty" if
+       megasas_dbg_lvl is set.
+    7. Fix megasas_build_dcdb_fusion() to not filter by TYPE_DISK.
+    8. Fix megasas_build_dcdb_fusion() to use io_request->LUN[1] field.
+    9. Add MR_EVT_CFG_CLEARED to megasas_aen_polling().
+    10. Fix tasklet_init() in megasas_init_fw() to use instancet->tasklet.
+    11. Fix fault state handling in megasas_transition_to_ready().
+    12. Fix max_sectors setting for IEEE SGL's.
+    13. Fix iMR OCR support to work correctly.
+-------------------------------------------------------------------------------
 Release Date    : Tues.  Dec 14, 2010 17:00:00 PST 2010 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Adam Radford

Documentation/scsi/hpsa.txt

@@ -28,6 +28,12 @@ boot parameter "hpsa_allow_any=1" is specified, however these are not tested
 nor supported by HP with this driver.  For older Smart Arrays, the cciss
 driver should still be used.
 
+The "hpsa_simple_mode=1" boot parameter may be used to prevent the driver from
+putting the controller into "performant" mode.  The difference is that with simple
+mode, each command completion requires an interrupt, while with "performant mode"
+(the default, and ordinarily better performing) it is possible to have multiple
+command completions indicated by a single interrupt.
+
 HPSA specific entries in /sys
 -----------------------------
 
@@ -39,6 +45,8 @@ HPSA specific entries in /sys
 
   /sys/class/scsi_host/host*/rescan
   /sys/class/scsi_host/host*/firmware_revision
+  /sys/class/scsi_host/host*/resettable
+  /sys/class/scsi_host/host*/transport_mode
 
   the host "rescan" attribute is a write only attribute.  Writing to this
   attribute will cause the driver to scan for new, changed, or removed devices
@@ -55,6 +63,21 @@ HPSA specific entries in /sys
 	root@host:/sys/class/scsi_host/host4# cat firmware_revision
 	7.14
 
+  The transport_mode indicates whether the controller is in "performant"
+  or "simple" mode.  This is controlled by the "hpsa_simple_mode" module
+  parameter.
+
+  The "resettable" read-only attribute indicates whether a particular
+  controller is able to honor the "reset_devices" kernel parameter.  If the
+  device is resettable, this file will contain a "1", otherwise, a "0".  This
+  parameter is used by kdump, for example, to reset the controller at driver
+  load time to eliminate any outstanding commands on the controller and get the
+  controller into a known state so that the kdump initiated i/o will work right
+  and not be disrupted in any way by stale commands or other stale state
+  remaining on the controller from the previous kernel.  This attribute enables
+  kexec tools to warn the user if they attempt to designate a device which is
+  unable to honor the reset_devices kernel parameter as a dump device.
+
   HPSA specific disk attributes:
   ------------------------------
 

Documentation/scsi/scsi_mid_low_api.txt

@@ -1343,14 +1343,26 @@ Members of interest:
                    underruns (overruns should be rare). If possible an LLD
                    should set 'resid' prior to invoking 'done'. The most
                    interesting case is data transfers from a SCSI target
-                   device device (i.e. READs) that underrun. 
+                   device (e.g. READs) that underrun.
     underflow    - LLD should place (DID_ERROR << 16) in 'result' if
                    actual number of bytes transferred is less than this
                    figure. Not many LLDs implement this check and some that
                    do just output an error message to the log rather than
                    report a DID_ERROR. Better for an LLD to implement
                    'resid'.
 
+It is recommended that a LLD set 'resid' on data transfers from a SCSI
+target device (e.g. READs). It is especially important that 'resid' is set
+when such data transfers have sense keys of MEDIUM ERROR and HARDWARE ERROR
+(and possibly RECOVERED ERROR). In these cases if a LLD is in doubt how much
+data has been received then the safest approach is to indicate no bytes have
+been received. For example: to indicate that no valid data has been received
+a LLD might use these helpers:
+    scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
+where 'SCpnt' is a pointer to a scsi_cmnd object. To indicate only three 512
+bytes blocks has been received 'resid' could be set like this:
+    scsi_set_resid(SCpnt, scsi_bufflen(SCpnt) - (3 * 512));
+
 The scsi_cmnd structure is defined in include/scsi/scsi_cmnd.h
 
 

MAINTAINERS

@@ -5359,8 +5359,7 @@ S:	Supported
 F:	drivers/s390/crypto/
 
 S390 ZFCP DRIVER
-M:	Christof Schmitt <christof.schmitt@de.ibm.com>
-M:	Swen Schillig <swen@vnet.ibm.com>
+M:	Steffen Maier <maier@linux.vnet.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/

block/blk-core.c

@@ -2045,9 +2045,26 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
 
 	if (error && req->cmd_type == REQ_TYPE_FS &&
 	    !(req->cmd_flags & REQ_QUIET)) {
-		printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
-				req->rq_disk ? req->rq_disk->disk_name : "?",
-				(unsigned long long)blk_rq_pos(req));
+		char *error_type;
+
+		switch (error) {
+		case -ENOLINK:
+			error_type = "recoverable transport";
+			break;
+		case -EREMOTEIO:
+			error_type = "critical target";
+			break;
+		case -EBADE:
+			error_type = "critical nexus";
+			break;
+		case -EIO:
+		default:
+			error_type = "I/O";
+			break;
+		}
+		printk(KERN_ERR "end_request: %s error, dev %s, sector %llu\n",
+		       error_type, req->rq_disk ? req->rq_disk->disk_name : "?",
+		       (unsigned long long)blk_rq_pos(req));
 	}
 
 	blk_account_io_completion(req, nr_bytes);

drivers/infiniband/ulp/iser/iscsi_iser.c

@@ -532,6 +532,29 @@ iscsi_iser_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *s
 	stats->custom[3].value = conn->fmr_unalign_cnt;
 }
 
+static int iscsi_iser_get_ep_param(struct iscsi_endpoint *ep,
+				   enum iscsi_param param, char *buf)
+{
+	struct iser_conn *ib_conn = ep->dd_data;
+	int len;
+
+	switch (param) {
+	case ISCSI_PARAM_CONN_PORT:
+	case ISCSI_PARAM_CONN_ADDRESS:
+		if (!ib_conn || !ib_conn->cma_id)
+			return -ENOTCONN;
+
+		return iscsi_conn_get_addr_param((struct sockaddr_storage *)
+					&ib_conn->cma_id->route.addr.dst_addr,
+					param, buf);
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return len;
+}
+
 static struct iscsi_endpoint *
 iscsi_iser_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
 		      int non_blocking)
@@ -637,6 +660,8 @@ static struct iscsi_transport iscsi_iser_transport = {
 				  ISCSI_MAX_BURST |
 				  ISCSI_PDU_INORDER_EN |
 				  ISCSI_DATASEQ_INORDER_EN |
+				  ISCSI_CONN_PORT |
+				  ISCSI_CONN_ADDRESS |
 				  ISCSI_EXP_STATSN |
 				  ISCSI_PERSISTENT_PORT |
 				  ISCSI_PERSISTENT_ADDRESS |
@@ -659,6 +684,7 @@ static struct iscsi_transport iscsi_iser_transport = {
 	.destroy_conn           = iscsi_iser_conn_destroy,
 	.set_param              = iscsi_iser_set_param,
 	.get_conn_param		= iscsi_conn_get_param,
+	.get_ep_param		= iscsi_iser_get_ep_param,
 	.get_session_param	= iscsi_session_get_param,
 	.start_conn             = iscsi_iser_conn_start,
 	.stop_conn              = iscsi_iser_conn_stop,

drivers/md/dm-mpath.c

@@ -1283,24 +1283,22 @@ static int do_end_io(struct multipath *m, struct request *clone,
 	if (!error && !clone->errors)
 		return 0;	/* I/O complete */
 
-	if (error == -EOPNOTSUPP)
-		return error;
-
-	if (clone->cmd_flags & REQ_DISCARD)
-		/*
-		 * Pass all discard request failures up.
-		 * FIXME: only fail_path if the discard failed due to a
-		 * transport problem.  This requires precise understanding
-		 * of the underlying failure (e.g. the SCSI sense).
-		 */
+	if (error == -EOPNOTSUPP || error == -EREMOTEIO)
 		return error;
 
 	if (mpio->pgpath)
 		fail_path(mpio->pgpath);
 
 	spin_lock_irqsave(&m->lock, flags);
-	if (!m->nr_valid_paths && !m->queue_if_no_path && !__must_push_back(m))
-		r = -EIO;
+	if (!m->nr_valid_paths) {
+		if (!m->queue_if_no_path) {
+			if (!__must_push_back(m))
+				r = -EIO;
+		} else {
+			if (error == -EBADE)
+				r = error;
+		}
+	}
 	spin_unlock_irqrestore(&m->lock, flags);
 
 	return r;

drivers/message/fusion/lsi/mpi_cnfg.h

@@ -2593,6 +2593,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE              (0x03)
 #define MPI_SAS_IOUNIT0_RATE_1_5                            (0x08)
 #define MPI_SAS_IOUNIT0_RATE_3_0                            (0x09)
+#define MPI_SAS_IOUNIT0_RATE_6_0                            (0x0A)
 
 /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
 

drivers/message/fusion/lsi/mpi_ioc.h

@@ -841,6 +841,7 @@ typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS
 #define MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE         (0x03)
 #define MPI_EVENT_SAS_PLS_LR_RATE_1_5                       (0x08)
 #define MPI_EVENT_SAS_PLS_LR_RATE_3_0                       (0x09)
+#define MPI_EVENT_SAS_PLS_LR_RATE_6_0                       (0x0A)
 
 /* SAS Discovery Event data */
 

drivers/message/fusion/mptbase.c

@@ -7418,7 +7418,12 @@ mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
 		case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
 			snprintf(evStr, EVENT_DESCR_STR_SZ,
 			   "SAS PHY Link Status: Phy=%d:"
-			   " Rate 3.0 Gpbs",PhyNumber);
+			   " Rate 3.0 Gbps", PhyNumber);
+			break;
+		case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
+			   " Rate 6.0 Gbps", PhyNumber);
 			break;
 		default:
 			snprintf(evStr, EVENT_DESCR_STR_SZ,

drivers/message/fusion/mptctl.c

@@ -1314,8 +1314,10 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
 	else
 		karg->adapterType = MPT_IOCTL_INTERFACE_SCSI;
 
-	if (karg->hdr.port > 1)
+	if (karg->hdr.port > 1) {
+		kfree(karg);
 		return -EINVAL;
+	}
 	port = karg->hdr.port;
 
 	karg->port = port;

drivers/message/fusion/mptsas.c

@@ -1973,7 +1973,6 @@ static struct scsi_host_template mptsas_driver_template = {
 	.change_queue_depth 		= mptscsih_change_queue_depth,
 	.eh_abort_handler		= mptscsih_abort,
 	.eh_device_reset_handler	= mptscsih_dev_reset,
-	.eh_bus_reset_handler		= mptscsih_bus_reset,
 	.eh_host_reset_handler		= mptscsih_host_reset,
 	.bios_param			= mptscsih_bios_param,
 	.can_queue			= MPT_SAS_CAN_QUEUE,
@@ -3063,6 +3062,9 @@ static int mptsas_probe_one_phy(struct device *dev,
 	case MPI_SAS_IOUNIT0_RATE_3_0:
 		phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
 		break;
+	case MPI_SAS_IOUNIT0_RATE_6_0:
+		phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+		break;
 	case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE:
 	case MPI_SAS_IOUNIT0_RATE_UNKNOWN:
 	default:
@@ -3691,7 +3693,8 @@ mptsas_send_link_status_event(struct fw_event_work *fw_event)
 	}
 
 	if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 ||
-	    link_rate == MPI_SAS_IOUNIT0_RATE_3_0) {
+	    link_rate == MPI_SAS_IOUNIT0_RATE_3_0 ||
+	    link_rate == MPI_SAS_IOUNIT0_RATE_6_0) {
 
 		if (!port_info) {
 			if (ioc->old_sas_discovery_protocal) {

drivers/net/bnx2x/bnx2x_main.c

@@ -145,13 +145,6 @@ static struct {
 	{ "Broadcom NetXtreme II BCM57712E XGb" }
 };
 
-#ifndef PCI_DEVICE_ID_NX2_57712
-#define PCI_DEVICE_ID_NX2_57712		0x1662
-#endif
-#ifndef PCI_DEVICE_ID_NX2_57712E
-#define PCI_DEVICE_ID_NX2_57712E	0x1663
-#endif
-
 static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
 	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
 	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },