---

yaml
---
r: 346816
b: refs/heads/master
c: c1fb681
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 4700dfaf1e988b785bd9791064df92d3353e8b88
+refs/heads/master: c1fb6816fb1b78dd94b673b0fdaa9a7a16e97bd1

trunk/arch/powerpc/include/asm/exception-64s.h

@@ -115,6 +115,7 @@
 	mfspr	r10,SPRN_CFAR;						\
 	std	r10,area+EX_CFAR(r13);					\
 	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		\
+	SAVE_LR(r10, area);						\
 	mfcr	r9;							\
 	extra(vec);							\
 	std	r11,area+EX_R11(r13);					\
@@ -215,6 +216,7 @@ do_kvm_##n:								\
 	sth	r1,PACA_TRAP_SAVE(r13);					   \
 	std	r3,area+EX_R3(r13);					   \
 	addi	r3,r13,area;		/* r3 -> where regs are saved*/	   \
+	RESTORE_LR(r1, area);						   \
 	b	bad_stack;						   \
 3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
 	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
@@ -240,8 +242,8 @@ do_kvm_##n:								\
 	ld	r10,area+EX_CFAR(r13);					   \
 	std	r10,ORIG_GPR3(r1);					   \
 	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		   \
+	GET_LR(r9,area);		/* Get LR, later save to stack	*/ \
 	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
-	mflr	r9;			/* save LR in stackframe	*/ \
 	std	r9,_LINK(r1);						   \
 	mfctr	r10;			/* save CTR in stackframe	*/ \
 	std	r10,_CTR(r1);						   \

trunk/arch/powerpc/kernel/exceptions-64s.S

@@ -19,11 +19,13 @@
 /*
  * We layout physical memory as follows:
  * 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support common interrupt prologs
- * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x0100 - 0x17ff : pSeries Interrupt prologs
+ * 0x1800 - 0x4000 : interrupt support common interrupt prologs
+ * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
+ * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
  * 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 -        : Early init and support code
+ * 0x8000 - 0x8fff : Initial (CPU0) segment table
+ * 0x9000 -        : Early init and support code
  */
 	/* Syscall routine is used twice, in reloc-off and reloc-on paths */
 #define SYSCALL_PSERIES_1 					\
@@ -619,10 +621,6 @@ slb_miss_user_pseries:
 	b	.				/* prevent spec. execution */
 #endif /* __DISABLED__ */
 
-	.align	7
-	.globl	__end_interrupts
-__end_interrupts:
-
 /*
  * Code from here down to __end_handlers is invoked from the
  * exception prologs above.  Because the prologs assemble the
@@ -673,7 +671,158 @@ machine_check_common:
 	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
 #endif /* CONFIG_CBE_RAS */
 
+	/*
+	 * Relocation-on interrupts: A subset of the interrupts can be delivered
+	 * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
+	 * it.  Addresses are the same as the original interrupt addresses, but
+	 * offset by 0xc000000000004000.
+	 * It's impossible to receive interrupts below 0x300 via this mechanism.
+	 * KVM: None of these traps are from the guest ; anything that escalated
+	 * to HV=1 from HV=0 is delivered via real mode handlers.
+	 */
+
+	/*
+	 * This uses the standard macro, since the original 0x300 vector
+	 * only has extra guff for STAB-based processors -- which never
+	 * come here.
+	 */
+	STD_RELON_EXCEPTION_PSERIES(0x4300, 0x300, data_access)
+	. = 0x4380
+	.globl data_access_slb_relon_pSeries
+data_access_slb_relon_pSeries:
+	HMT_MEDIUM
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_DAR
+	mfspr	r12,SPRN_SRR1
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	/*
+	 * We can't just use a direct branch to .slb_miss_realmode
+	 * because the distance from here to there depends on where
+	 * the kernel ends up being put.
+	 */
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+
+	STD_RELON_EXCEPTION_PSERIES(0x4400, 0x400, instruction_access)
+	. = 0x4480
+	.globl instruction_access_slb_relon_pSeries
+instruction_access_slb_relon_pSeries:
+	HMT_MEDIUM
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
+	mfspr	r12,SPRN_SRR1
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+
+	. = 0x4500
+	.globl hardware_interrupt_relon_pSeries;
+	.globl hardware_interrupt_relon_hv;
+hardware_interrupt_relon_pSeries:
+hardware_interrupt_relon_hv:
+	BEGIN_FTR_SECTION
+		_MASKABLE_RELON_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV, SOFTEN_TEST_HV)
+	FTR_SECTION_ELSE
+		_MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD, SOFTEN_TEST_PR)
+	ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_206)
+	STD_RELON_EXCEPTION_PSERIES(0x4600, 0x600, alignment)
+	STD_RELON_EXCEPTION_PSERIES(0x4700, 0x700, program_check)
+	STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable)
+	MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer)
+	STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer)
+	STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b)
+
+	. = 0x4c00
+	.globl system_call_relon_pSeries
+system_call_relon_pSeries:
+	HMT_MEDIUM
+	SYSCALL_PSERIES_1
+	SYSCALL_PSERIES_2_DIRECT
+	SYSCALL_PSERIES_3
+
+	STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step)
+
+	. = 0x4e00
+	b	h_data_storage_relon_hv
+
+	. = 0x4e20
+	b	h_instr_storage_relon_hv
+
+	. = 0x4e40
+	b	emulation_assist_relon_hv
+
+	. = 0x4e50
+	b	hmi_exception_relon_hv
+
+	. = 0x4e60
+	b	hmi_exception_relon_hv
+
+	/* For when we support the doorbell interrupt:
+	STD_RELON_EXCEPTION_HYPERVISOR(0x4e80, 0xe80, doorbell_hyper)
+	*/
+
+performance_monitor_relon_pSeries_1:
+	. = 0x4f00
+	b	performance_monitor_relon_pSeries
+
+altivec_unavailable_relon_pSeries_1:
+	. = 0x4f20
+	b	altivec_unavailable_relon_pSeries
+
+vsx_unavailable_relon_pSeries_1:
+	. = 0x4f40
+	b	vsx_unavailable_relon_pSeries
+
+#ifdef CONFIG_CBE_RAS
+	STD_RELON_EXCEPTION_HV(0x5200, 0x1202, cbe_system_error)
+#endif /* CONFIG_CBE_RAS */
+	STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
+#ifdef CONFIG_PPC_DENORMALISATION
+	. = 0x5500
+	b	denorm_exception_hv
+#endif
+#ifdef CONFIG_CBE_RAS
+	STD_RELON_EXCEPTION_HV(0x5600, 0x1602, cbe_maintenance)
+#else
+#ifdef CONFIG_HVC_SCOM
+	STD_RELON_EXCEPTION_HV(0x5600, 0x1600, maintence_interrupt)
+	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1600)
+#endif /* CONFIG_HVC_SCOM */
+#endif /* CONFIG_CBE_RAS */
+	STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist)
+#ifdef CONFIG_CBE_RAS
+	STD_RELON_EXCEPTION_HV(0x5800, 0x1802, cbe_thermal)
+#endif /* CONFIG_CBE_RAS */
+
+	/* Other future vectors */
+	.align	7
+	.globl	__end_interrupts
+__end_interrupts:
+
 	.align	7
+system_call_entry_direct:
+#if defined(CONFIG_RELOCATABLE)
+	/* The first level prologue may have used LR to get here, saving
+	 * orig in r10.  To save hacking/ifdeffing common code, restore here.
+	 */
+	mtlr	r10
+#endif
 system_call_entry:
 	b	system_call_common
 
@@ -1196,6 +1345,21 @@ _GLOBAL(do_stab_bolted)
 	rfid
 	b	.	/* prevent speculative execution */
 
+
+	/* Equivalents to the above handlers for relocation-on interrupt vectors */
+	STD_RELON_EXCEPTION_HV(., 0xe00, h_data_storage)
+	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe00)
+	STD_RELON_EXCEPTION_HV(., 0xe20, h_instr_storage)
+	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe20)
+	STD_RELON_EXCEPTION_HV(., 0xe40, emulation_assist)
+	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe40)
+	STD_RELON_EXCEPTION_HV(., 0xe60, hmi_exception)
+	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe60)
+
+	STD_RELON_EXCEPTION_PSERIES(., 0xf00, performance_monitor)
+	STD_RELON_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable)
+	STD_RELON_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable)
+
 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*
  * Data area reserved for FWNMI option.

trunk/arch/powerpc/kernel/head_64.S

@@ -432,7 +432,8 @@ _STATIC(__after_prom_start)
 	cmplwi	cr0,r7,1
 	bne	3f
 
-	li	r5,__end_interrupts - _stext	/* just copy interrupts */
+	/* just copy interrupts */
+	LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
 	b	5f
 3:
 #endif