---

yaml --- r: 3010 b: refs/heads/master c: bf1b8ab h: refs/heads/master v: v3
git-mirror · Jun 23, 2005 · c6b1b4c · c6b1b4c
1 parent 505fc03
commit c6b1b4c
Show file tree

Hide file tree

Showing 414 changed files with 3,219 additions and 8,834 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: f46f6b20cb01508f5020142ff91021f8fb39550b
+refs/heads/master: bf1b8ab6f21e1adbab1abd1b4e71c35fe65dc5fe
diff --git a/trunk/Documentation/dontdiff b/trunk/Documentation/dontdiff
@@ -111,7 +111,6 @@ mkdep
 mktables
 modpost
 modversions.h*
-offset.h
 offsets.h
 oui.c*
 parse.c*

diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
@@ -66,14 +66,6 @@ Who:	Paul E. McKenney <paulmck@us.ibm.com>
 
 ---------------------------
 
-What:	remove verify_area()
-When:	July 2006
-Files:	Various uaccess.h headers.
-Why:	Deprecated and redundant. access_ok() should be used instead.
-Who:	Jesper Juhl <juhl-lkml@dif.dk>
-
----------------------------
-
 What:	IEEE1394 Audio and Music Data Transmission Protocol driver,
 	Connection Management Procedures driver
 When:	November 2005
@@ -94,16 +86,6 @@ Who:	Jody McIntyre <scjody@steamballoon.com>
 
 ---------------------------
 
-What:	register_serial/unregister_serial
-When:	December 2005
-Why:	This interface does not allow serial ports to be registered against
-	a struct device, and as such does not allow correct power management
-	of such ports.  8250-based ports should use serial8250_register_port
-	and serial8250_unregister_port instead.
-Who:	Russell King <rmk@arm.linux.org.uk>
-
----------------------------
-
 What:	i2c sysfs name change: in1_ref, vid deprecated in favour of cpu0_vid
 When:	November 2005
 Files:	drivers/i2c/chips/adm1025.c, drivers/i2c/chips/adm1026.c

diff --git a/trunk/Documentation/sysctl/kernel.txt b/trunk/Documentation/sysctl/kernel.txt
@@ -49,7 +49,6 @@ show up in /proc/sys/kernel:
 - shmmax                      [ sysv ipc ]
 - shmmni
 - stop-a                      [ SPARC only ]
-- suid_dumpable
 - sysrq                       ==> Documentation/sysrq.txt
 - tainted
 - threads-max
@@ -301,25 +300,6 @@ kernel.  This value defaults to SHMMAX.
 
 ==============================================================
 
-suid_dumpable:
-
-This value can be used to query and set the core dump mode for setuid
-or otherwise protected/tainted binaries. The modes are
-
-0 - (default) - traditional behaviour. Any process which has changed
-	privilege levels or is execute only will not be dumped
-1 - (debug) - all processes dump core when possible. The core dump is
-	owned by the current user and no security is applied. This is
-	intended for system debugging situations only. Ptrace is unchecked.
-2 - (suidsafe) - any binary which normally would not be dumped is dumped
-	readable by root only. This allows the end user to remove
-	such a dump but not access it directly. For security reasons
-	core dumps in this mode will not overwrite one another or
-	other files. This mode is appropriate when adminstrators are
-	attempting to debug problems in a normal environment.
-
-==============================================================
-
 tainted: 
 
 Non-zero if the kernel has been tainted.  Numeric values, which

diff --git a/trunk/Documentation/tty.txt b/trunk/Documentation/tty.txt
@@ -22,7 +22,7 @@ copy of the structure. You must not re-register over the top of the line
 discipline even with the same data or your computer again will be eaten by
 demons.
 
-In order to remove a line discipline call tty_unregister_ldisc().
+In order to remove a line discipline call tty_register_ldisc passing NULL.
 In ancient times this always worked. In modern times the function will
 return -EBUSY if the ldisc is currently in use. Since the ldisc referencing
 code manages the module counts this should not usually be a concern.

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -304,7 +304,7 @@ S:	Maintained
 ARM/PT DIGITAL BOARD PORT
 P:	Stefan Eletzhofer
 M:	stefan.eletzhofer@eletztrick.de
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+L:	linux-arm-kernel@lists.arm.linux.org.uk
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 
@@ -317,21 +317,21 @@ S:	Maintained
 ARM/STRONGARM110 PORT
 P:	Russell King
 M:	rmk@arm.linux.org.uk
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+L:	linux-arm-kernel@lists.arm.linux.org.uk
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 
 ARM/S3C2410 ARM ARCHITECTURE
 P:	Ben Dooks
 M:	ben-s3c2410@fluff.org
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+L:	linux-arm-kernel@lists.arm.linux.org.uk
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 
 ARM/S3C2440 ARM ARCHITECTURE
 P:	Ben Dooks
 M:	ben-s3c2440@fluff.org
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+L:	linux-arm-kernel@lists.arm.linux.org.uk
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 
@@ -504,13 +504,6 @@ L:   bonding-devel@lists.sourceforge.net
 W:   http://sourceforge.net/projects/bonding/
 S:   Supported
 
-BROADBAND PROCESSOR ARCHITECTURE
-P:	Arnd Bergmann
-M:	arnd@arndb.de
-L:	linuxppc64-dev@ozlabs.org
-W:	http://linuxppc64.org
-S:	Supported
-
 BTTV VIDEO4LINUX DRIVER
 P:	Gerd Knorr
 M:	kraxel@bytesex.org
@@ -1860,7 +1853,7 @@ S:	Maintained
 PXA2xx SUPPORT
 P:	Nicolas Pitre
 M:	nico@cam.org
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+L:	linux-arm-kernel@lists.arm.linux.org.uk
 S:	Maintained
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
@@ -2162,7 +2155,7 @@ SHARP LH SUPPORT (LH7952X & LH7A40X)
 P:	Marc Singer
 M:	elf@buici.com
 W:	http://projects.buici.com/arm
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+L:	linux-arm-kernel@lists.arm.linux.org.uk
 S:	Maintained
 
 SPARC (sparc32):

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -518,7 +518,7 @@ CFLAGS		+= $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops)
 CFLAGS		+= $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps)
 
 ifdef CONFIG_FRAME_POINTER
-CFLAGS		+= -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
+CFLAGS		+= -fno-omit-frame-pointer
 else
 CFLAGS		+= -fomit-frame-pointer
 endif

diff --git a/trunk/arch/alpha/Kconfig b/trunk/arch/alpha/Kconfig
@@ -509,7 +509,7 @@ config NR_CPUS
 	depends on SMP
 	default "64"
 
-config ARCH_DISCONTIGMEM_ENABLE
+config DISCONTIGMEM
 	bool "Discontiguous Memory Support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	help
@@ -518,8 +518,6 @@ config ARCH_DISCONTIGMEM_ENABLE
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
-source "mm/Kconfig"
-
 config NUMA
 	bool "NUMA Support (EXPERIMENTAL)"
 	depends on DISCONTIGMEM

diff --git a/trunk/arch/alpha/defconfig b/trunk/arch/alpha/defconfig
@@ -96,7 +96,7 @@ CONFIG_ALPHA_CORE_AGP=y
 CONFIG_ALPHA_BROKEN_IRQ_MASK=y
 CONFIG_EISA=y
 # CONFIG_SMP is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_DISCONTIGMEM is not set
 CONFIG_VERBOSE_MCHECK=y
 CONFIG_VERBOSE_MCHECK_ON=1
 CONFIG_PCI_LEGACY_PROC=y

diff --git a/trunk/arch/alpha/mm/numa.c b/trunk/arch/alpha/mm/numa.c
@@ -327,6 +327,8 @@ void __init mem_init(void)
 	extern char _text, _etext, _data, _edata;
 	extern char __init_begin, __init_end;
 	unsigned long nid, i;
+	struct page * lmem_map;
+
 	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 
 	reservedpages = 0;
@@ -336,10 +338,10 @@ void __init mem_init(void)
 		 */
 		totalram_pages += free_all_bootmem_node(NODE_DATA(nid));
 
+		lmem_map = node_mem_map(nid);
 		pfn = NODE_DATA(nid)->node_start_pfn;
 		for (i = 0; i < node_spanned_pages(nid); i++, pfn++)
-			if (page_is_ram(pfn) &&
-			    PageReserved(nid_page_nr(nid, i)))
+			if (page_is_ram(pfn) && PageReserved(lmem_map+i))
 				reservedpages++;
 	}
 
@@ -371,18 +373,18 @@ show_mem(void)
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_online_node(nid) {
+		struct page * lmem_map = node_mem_map(nid);
 		i = node_spanned_pages(nid);
 		while (i-- > 0) {
-			struct page *page = nid_page_nr(nid, i);
 			total++;
-			if (PageReserved(page))
+			if (PageReserved(lmem_map+i))
 				reserved++;
-			else if (PageSwapCache(page))
+			else if (PageSwapCache(lmem_map+i))
 				cached++;
-			else if (!page_count(page))
+			else if (!page_count(lmem_map+i))
 				free++;
 			else
-				shared += page_count(page) - 1;
+				shared += page_count(lmem_map + i) - 1;
 		}
 	}
 	printk("%ld pages of RAM\n",total);

diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
@@ -346,7 +346,7 @@ config PREEMPT
 	  Say Y here if you are building a kernel for a desktop, embedded
 	  or real-time system.  Say N if you are unsure.
 
-config ARCH_DISCONTIGMEM_ENABLE
+config DISCONTIGMEM
 	bool
 	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
 	help
@@ -355,8 +355,6 @@ config ARCH_DISCONTIGMEM_ENABLE
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
-source "mm/Kconfig"
-
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \

diff --git a/trunk/arch/arm/boot/install.sh b/trunk/arch/arm/boot/install.sh
@@ -21,8 +21,8 @@
 #
 
 # User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
+if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
 
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install

diff --git a/trunk/arch/arm26/Kconfig b/trunk/arch/arm26/Kconfig
@@ -179,8 +179,6 @@ config CMDLINE
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
-source "mm/Kconfig"
-
 endmenu
 
 source "drivers/base/Kconfig"

diff --git a/trunk/arch/arm26/boot/install.sh b/trunk/arch/arm26/boot/install.sh
@@ -23,8 +23,8 @@
 
 # User may have a custom install script
 
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then
-  exec /sbin/${CROSS_COMPILE}installkernel "$@"
+if [ -x /sbin/installkernel ]; then
+  exec /sbin/installkernel "$@"
 fi
 
 if [ "$2" = "zImage" ]; then

diff --git a/trunk/arch/cris/Kconfig b/trunk/arch/cris/Kconfig
@@ -74,8 +74,6 @@ config PREEMPT
 	  Say Y here if you are building a kernel for a desktop, embedded
 	  or real-time system.  Say N if you are unsure.
 
-source mm/Kconfig
-
 endmenu
 
 menu "Hardware setup"

diff --git a/trunk/arch/frv/Kconfig b/trunk/arch/frv/Kconfig
@@ -74,8 +74,6 @@ config HIGHPTE
 	  with a lot of RAM, this can be wasteful of precious low memory.
 	  Setting this option will put user-space page tables in high memory.
 
-source "mm/Kconfig"
-
 choice
 	prompt "uClinux kernel load address"
 	depends on !MMU

diff --git a/trunk/arch/h8300/Kconfig.cpu b/trunk/arch/h8300/Kconfig.cpu
@@ -180,7 +180,4 @@ config CPU_H8S
 config PREEMPT
 	bool "Preemptible Kernel"
 	default n
-
-source "mm/Kconfig"
-
 endmenu
diff --git a/trunk/arch/h8300/platform/h8300h/ptrace_h8300h.c b/trunk/arch/h8300/platform/h8300h/ptrace_h8300h.c
@@ -245,12 +245,12 @@ static unsigned short *getnextpc(struct task_struct *child, unsigned short *pc)
 						addr = h8300_get_reg(child, regno-1+PT_ER1);
 					return (unsigned short *)addr;
 				case relb:
-					if (inst == 0x55 || isbranch(child,inst & 0x0f))
+					if ((inst = 0x55) || isbranch(child,inst & 0x0f))
 						pc = (unsigned short *)((unsigned long)pc +
 								       ((signed char)(*fetch_p)));
 					return pc+1; /* skip myself */
 				case relw:
-					if (inst == 0x5c || isbranch(child,(*fetch_p & 0xf0) >> 4))
+					if ((inst = 0x5c) || isbranch(child,(*fetch_p & 0xf0) >> 4))
 						pc = (unsigned short *)((unsigned long)pc +
 								       ((signed short)(*(pc+1))));
 					return pc+2; /* skip myself */

diff --git a/trunk/arch/i386/Kconfig b/trunk/arch/i386/Kconfig
@@ -68,6 +68,7 @@ config X86_VOYAGER
 
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
+	select DISCONTIGMEM
 	select NUMA
 	help
 	  This option is used for getting Linux to run on a (IBM/Sequent) NUMA
@@ -782,48 +783,25 @@ comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support"
 comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
 	depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
 
-config HAVE_ARCH_BOOTMEM_NODE
+config DISCONTIGMEM
 	bool
 	depends on NUMA
 	default y
 
-config ARCH_HAVE_MEMORY_PRESENT
-	bool
-	depends on DISCONTIGMEM
-	default y
-
-config NEED_NODE_MEMMAP_SIZE
+config HAVE_ARCH_BOOTMEM_NODE
 	bool
-	depends on DISCONTIGMEM || SPARSEMEM
+	depends on NUMA
 	default y
 
-config HAVE_ARCH_ALLOC_REMAP
+config HAVE_MEMORY_PRESENT
 	bool
-	depends on NUMA
+	depends on DISCONTIGMEM
 	default y
 
-config ARCH_DISCONTIGMEM_ENABLE
-	def_bool y
-	depends on NUMA
-
-config ARCH_DISCONTIGMEM_DEFAULT
-	def_bool y
-	depends on NUMA
-
-config ARCH_SPARSEMEM_ENABLE
-	def_bool y
-	depends on NUMA
-
-config ARCH_SELECT_MEMORY_MODEL
-	def_bool y
-	depends on ARCH_SPARSEMEM_ENABLE
-
-source "mm/Kconfig"
-
-config HAVE_ARCH_EARLY_PFN_TO_NID
+config NEED_NODE_MEMMAP_SIZE
 	bool
+	depends on DISCONTIGMEM
 	default y
-	depends on NUMA
 
 config HIGHPTE
 	bool "Allocate 3rd-level pagetables from highmem"
@@ -961,8 +939,6 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
-source kernel/Kconfig.hz
-
 endmenu