---

yaml
---
r: 290272
b: refs/heads/master
c: 241b128
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d6a434d60e064a5f2bef1c13ca5ed84bfa6b8b4f
+refs/heads/master: 241b128b6b69ad41fc6f12cba45a3c3e64bce673

trunk/drivers/net/wireless/ath/ath6kl/Kconfig

@@ -1,12 +1,29 @@
 config ATH6KL
-	tristate "Atheros ath6kl support"
+	tristate "Atheros mobile chipsets support"
+
+config ATH6KL_SDIO
+	tristate "Atheros ath6kl SDIO support"
+	depends on ATH6KL
 	depends on MMC
 	depends on CFG80211
 	---help---
 	  This module adds support for wireless adapters based on
-	  Atheros AR6003 chipset running over SDIO. If you choose to
-	  build it as a module, it will be called ath6kl. Pls note
-	  that AR6002 and AR6001 are not supported by this driver.
+	  Atheros AR6003 and AR6004 chipsets running over SDIO. If you
+	  choose to build it as a module, it will be called ath6kl_sdio.
+	  Please note that AR6002 and AR6001 are not supported by this
+	  driver.
+
+config ATH6KL_USB
+	tristate "Atheros ath6kl USB support"
+	depends on ATH6KL
+	depends on USB
+	depends on CFG80211
+	depends on EXPERIMENTAL
+	---help---
+	  This module adds support for wireless adapters based on
+	  Atheros AR6004 chipset running over USB. This is still under
+	  implementation and it isn't functional. If you choose to
+	  build it as a module, it will be called ath6kl_usb.
 
 config ATH6KL_DEBUG
 	bool "Atheros ath6kl debugging"

trunk/drivers/net/wireless/ath/ath6kl/Makefile

@@ -36,3 +36,6 @@ ath6kl_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
 
 obj-$(CONFIG_ATH6KL_SDIO) += ath6kl_sdio.o
 ath6kl_sdio-y += sdio.o
+
+obj-$(CONFIG_ATH6KL_USB) += ath6kl_usb.o
+ath6kl_usb-y += usb.o

trunk/drivers/net/wireless/ath/ath6kl/bmi.c

@@ -57,8 +57,14 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
 		return ret;
 	}
 
-	ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
-				  sizeof(targ_info->version));
+	if (ar->hif_type == ATH6KL_HIF_TYPE_USB) {
+		ret = ath6kl_hif_bmi_read(ar, (u8 *)targ_info,
+					  sizeof(*targ_info));
+	} else {
+		ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
+				sizeof(targ_info->version));
+	}
+
 	if (ret) {
 		ath6kl_err("Unable to recv target info: %d\n", ret);
 		return ret;

trunk/drivers/net/wireless/ath/ath6kl/debug.h

@@ -41,6 +41,7 @@ enum ATH6K_DEBUG_MASK {
 	ATH6KL_DBG_BOOT		= BIT(18),    /* driver init and fw boot */
 	ATH6KL_DBG_WMI_DUMP	= BIT(19),
 	ATH6KL_DBG_SUSPEND	= BIT(20),
+	ATH6KL_DBG_USB		= BIT(21),
 	ATH6KL_DBG_ANY	        = 0xffffffff  /* enable all logs */
 };
 

trunk/drivers/net/wireless/ath/ath6kl/hif.c

@@ -693,6 +693,11 @@ int ath6kl_hif_setup(struct ath6kl_device *dev)
 	ath6kl_dbg(ATH6KL_DBG_HIF, "hif block size %d mbox addr 0x%x\n",
 		   dev->htc_cnxt->block_sz, dev->ar->mbox_info.htc_addr);
 
+	/* usb doesn't support enabling interrupts */
+	/* FIXME: remove check once USB support is implemented */
+	if (dev->ar->hif_type == ATH6KL_HIF_TYPE_USB)
+		return 0;
+
 	status = ath6kl_hif_disable_intrs(dev);
 
 fail_setup:

trunk/drivers/net/wireless/ath/ath6kl/htc.c

@@ -2544,6 +2544,12 @@ int ath6kl_htc_wait_target(struct htc_target *target)
 	struct htc_service_connect_resp resp;
 	int status;
 
+	/* FIXME: remove once USB support is implemented */
+	if (target->dev->ar->hif_type == ATH6KL_HIF_TYPE_USB) {
+		ath6kl_err("HTC doesn't support USB yet. Patience!\n");
+		return -EOPNOTSUPP;
+	}
+
 	/* we should be getting 1 control message that the target is ready */
 	packet = htc_wait_for_ctrl_msg(target);
 
@@ -2773,7 +2779,9 @@ void ath6kl_htc_cleanup(struct htc_target *target)
 {
 	struct htc_packet *packet, *tmp_packet;
 
-	ath6kl_hif_cleanup_scatter(target->dev->ar);
+	/* FIXME: remove check once USB support is implemented */
+	if (target->dev->ar->hif_type != ATH6KL_HIF_TYPE_USB)
+		ath6kl_hif_cleanup_scatter(target->dev->ar);
 
 	list_for_each_entry_safe(packet, tmp_packet,
 			&target->free_ctrl_txbuf, list) {

trunk/drivers/net/wireless/ath/ath6kl/sdio.c

@@ -1330,7 +1330,7 @@ static const struct sdio_device_id ath6kl_sdio_devices[] = {
 MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices);
 
 static struct sdio_driver ath6kl_sdio_driver = {
-	.name = "ath6kl",
+	.name = "ath6kl_sdio",
 	.id_table = ath6kl_sdio_devices,
 	.probe = ath6kl_sdio_probe,
 	.remove = ath6kl_sdio_remove,