---

yaml
---
r: 288511
b: refs/heads/master
c: 3d777a6
h: refs/heads/master
i:
  288509: bac5816
  288507: 2e02d3c
  288503: c8aa895
  288495: 737e1d7
  288479: 1b05cd9
  288447: e752d45
  288383: 40eebdc
  288255: 5852ec8
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 33e9ee8dbd0c564533e9ac0e1a0c00e073d5b5c0
+refs/heads/master: 3d777a64066f3b9db8a94834aaed6a9cf09808fd

trunk/Documentation/hwmon/w83627ehf

@@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
 (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
 as Winbond chips.
 
-The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
 (except for 627UHG), alarms with beep warnings (control unimplemented),
 and some automatic fan regulation strategies (plus manual fan control mode).
@@ -143,13 +143,8 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature
 pwm[1-4]_stop_time  - how many milliseconds [ms] must elapse to switch
                       corresponding fan off. (when the temperature was below
                       defined range).
-pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up
-pwm[1-4]_step_output- rate of fan speed change (1 - 255)
-pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down
-pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature
-                      is above defined range.
 
-Note: last six functions are influenced by other control bits, not yet exported
+Note: last two functions are influenced by other control bits, not yet exported
       by the driver, so a change might not have any effect.
 
 Implementation Details

trunk/Documentation/hwmon/zl6100

@@ -88,12 +88,14 @@ Module parameters
 delay
 -----
 
-Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C
-bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms
-appears to be sufficient and has not caused any problems in testing. The problem
-is known to affect all currently supported chips. For manual override, the
-driver provides a writeable module parameter, 'delay', which can be used to set
-the interval to a value between 0 and 65,535 microseconds.
+Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
+I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
+1 ms appears to be sufficient and has not caused any problems in testing.
+The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
+affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
+except for ZL2004 and ZL6105. To enable manual override, the driver provides a
+writeable module parameter, 'delay', which can be used to set the interval to
+a value between 0 and 65,535 microseconds.
 
 
 Sysfs entries

trunk/MAINTAINERS

@@ -1721,14 +1721,6 @@ F:	include/linux/can/error.h
 F:	include/linux/can/netlink.h
 F:	include/linux/can/platform/
 
-CAPABILITIES
-M:	Serge Hallyn <serge.hallyn@canonical.com>
-L:	linux-security-module@vger.kernel.org
-S:	Supported	
-F:	include/linux/capability.h
-F:	security/capability.c
-F:	security/commoncap.c 
-
 CELL BROADBAND ENGINE ARCHITECTURE
 M:	Arnd Bergmann <arnd@arndb.de>
 L:	linuxppc-dev@lists.ozlabs.org

trunk/arch/c6x/kernel/entry.S

@@ -717,6 +717,33 @@ ENTRY(sys_ftruncate64_c6x)
 #endif
 ENDPROC(sys_ftruncate64_c6x)
 
+#ifdef __ARCH_WANT_SYSCALL_OFF_T
+;; On Entry
+;;   A4 - fd
+;;   B4 - offset_lo (LE), offset_hi (BE)
+;;   A6 - offset_lo (BE), offset_hi (LE)
+;;   B6 - len
+;;   A8 - advice
+ENTRY(sys_fadvise64_c6x)
+#ifdef CONFIG_C6X_BIG_KERNEL
+	MVKL	.S1	sys_fadvise64,A0
+	MVKH	.S1	sys_fadvise64,A0
+	BNOP	.S2X	A0,2
+#else
+	B	.S2	sys_fadvise64
+	NOP	2
+#endif
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	MV	.L2	B4,B5
+ ||	MV	.D2X	A6,B4
+#else
+	MV	.D2X	A6,B5
+#endif
+	MV	.D1X	B6,A6
+	MV	.D2X	A8,B6
+#endif
+ENDPROC(sys_fadvise64_c6x)
+
 ;; On Entry
 ;;   A4 - fd
 ;;   B4 - offset_lo (LE), offset_hi (BE)

trunk/drivers/gpu/drm/exynos/exynos_drm_connector.c

@@ -54,14 +54,14 @@ convert_to_display_mode(struct drm_display_mode *mode,
 	mode->vrefresh = timing->refresh;
 
 	mode->hdisplay = timing->xres;
-	mode->hsync_start = mode->hdisplay + timing->right_margin;
+	mode->hsync_start = mode->hdisplay + timing->left_margin;
 	mode->hsync_end = mode->hsync_start + timing->hsync_len;
-	mode->htotal = mode->hsync_end + timing->left_margin;
+	mode->htotal = mode->hsync_end + timing->right_margin;
 
 	mode->vdisplay = timing->yres;
-	mode->vsync_start = mode->vdisplay + timing->lower_margin;
+	mode->vsync_start = mode->vdisplay + timing->upper_margin;
 	mode->vsync_end = mode->vsync_start + timing->vsync_len;
-	mode->vtotal = mode->vsync_end + timing->upper_margin;
+	mode->vtotal = mode->vsync_end + timing->lower_margin;
 	mode->width_mm = panel->width_mm;
 	mode->height_mm = panel->height_mm;
 
@@ -85,14 +85,14 @@ convert_to_video_timing(struct fb_videomode *timing,
 	timing->refresh = drm_mode_vrefresh(mode);
 
 	timing->xres = mode->hdisplay;
-	timing->right_margin = mode->hsync_start - mode->hdisplay;
+	timing->left_margin = mode->hsync_start - mode->hdisplay;
 	timing->hsync_len = mode->hsync_end - mode->hsync_start;
-	timing->left_margin = mode->htotal - mode->hsync_end;
+	timing->right_margin = mode->htotal - mode->hsync_end;
 
 	timing->yres = mode->vdisplay;
-	timing->lower_margin = mode->vsync_start - mode->vdisplay;
+	timing->upper_margin = mode->vsync_start - mode->vdisplay;
 	timing->vsync_len = mode->vsync_end - mode->vsync_start;
-	timing->upper_margin = mode->vtotal - mode->vsync_end;
+	timing->lower_margin = mode->vtotal - mode->vsync_end;
 
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 		timing->vmode = FB_VMODE_INTERLACED;

trunk/drivers/gpu/drm/exynos/exynos_drm_drv.c

@@ -246,7 +246,7 @@ static struct platform_driver exynos_drm_platform_driver = {
 	.remove		= __devexit_p(exynos_drm_platform_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "exynos-drm",
+		.name	= DRIVER_NAME,
 	},
 };
 

trunk/drivers/gpu/drm/exynos/exynos_drm_fbdev.c

@@ -46,13 +46,39 @@ struct exynos_drm_fbdev {
 	struct exynos_drm_gem_obj	*exynos_gem_obj;
 };
 
+static int exynos_drm_fbdev_set_par(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+
+	switch (var->bits_per_pixel) {
+	case 32:
+	case 24:
+	case 18:
+	case 16:
+	case 12:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	case 1:
+		info->fix.visual = FB_VISUAL_MONO01;
+		break;
+	default:
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		break;
+	}
+
+	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
+
+	return drm_fb_helper_set_par(info);
+}
+
+
 static struct fb_ops exynos_drm_fb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
 	.fb_imageblit	= cfb_imageblit,
 	.fb_check_var	= drm_fb_helper_check_var,
-	.fb_set_par	= drm_fb_helper_set_par,
+	.fb_set_par	= exynos_drm_fbdev_set_par,
 	.fb_blank	= drm_fb_helper_blank,
 	.fb_pan_display	= drm_fb_helper_pan_display,
 	.fb_setcmap	= drm_fb_helper_setcmap,

trunk/drivers/gpu/drm/exynos/exynos_drm_fimd.c

@@ -817,13 +817,17 @@ static int __devinit fimd_probe(struct platform_device *pdev)
 		goto err_clk_get;
 	}
 
+	clk_enable(ctx->bus_clk);
+
 	ctx->lcd_clk = clk_get(dev, "sclk_fimd");
 	if (IS_ERR(ctx->lcd_clk)) {
 		dev_err(dev, "failed to get lcd clock\n");
 		ret = PTR_ERR(ctx->lcd_clk);
 		goto err_bus_clk;
 	}
 
+	clk_enable(ctx->lcd_clk);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "failed to find registers\n");
@@ -860,11 +864,17 @@ static int __devinit fimd_probe(struct platform_device *pdev)
 		goto err_req_irq;
 	}
 
+	ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
 	ctx->vidcon0 = pdata->vidcon0;
 	ctx->vidcon1 = pdata->vidcon1;
 	ctx->default_win = pdata->default_win;
 	ctx->panel = panel;
 
+	panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
+
+	DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
+			panel->timing.pixclock, ctx->clkdiv);
+
 	subdrv = &ctx->subdrv;
 
 	subdrv->probe = fimd_subdrv_probe;
@@ -879,15 +889,10 @@ static int __devinit fimd_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ctx);
 
+	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-	ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
-	panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
-
-	DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
-			panel->timing.pixclock, ctx->clkdiv);
-
 	for (win = 0; win < WINDOWS_NR; win++)
 		fimd_clear_win(ctx, win);
 

trunk/drivers/gpu/drm/i915/i915_reg.h

@@ -2689,7 +2689,7 @@
 #define   DVS_FORMAT_RGBX888	(2<<25)
 #define   DVS_FORMAT_RGBX161616	(3<<25)
 #define   DVS_SOURCE_KEY	(1<<22)
-#define   DVS_RGB_ORDER_XBGR	(1<<20)
+#define   DVS_RGB_ORDER_RGBX	(1<<20)
 #define   DVS_YUV_BYTE_ORDER_MASK (3<<16)
 #define   DVS_YUV_ORDER_YUYV	(0<<16)
 #define   DVS_YUV_ORDER_UYVY	(1<<16)

trunk/drivers/gpu/drm/i915/intel_display.c

@@ -7828,7 +7828,6 @@ int intel_framebuffer_init(struct drm_device *dev,
 	case DRM_FORMAT_RGB332:
 	case DRM_FORMAT_RGB565:
 	case DRM_FORMAT_XRGB8888:
-	case DRM_FORMAT_XBGR8888:
 	case DRM_FORMAT_ARGB8888:
 	case DRM_FORMAT_XRGB2101010:
 	case DRM_FORMAT_ARGB2101010:

trunk/drivers/gpu/drm/i915/intel_sprite.c

@@ -225,16 +225,16 @@ snb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
 
 	/* Mask out pixel format bits in case we change it */
 	dvscntr &= ~DVS_PIXFORMAT_MASK;
-	dvscntr &= ~DVS_RGB_ORDER_XBGR;
+	dvscntr &= ~DVS_RGB_ORDER_RGBX;
 	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
-		dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR;
+		dvscntr |= DVS_FORMAT_RGBX888;
 		pixel_size = 4;
 		break;
 	case DRM_FORMAT_XRGB8888:
-		dvscntr |= DVS_FORMAT_RGBX888;
+		dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_RGBX;
 		pixel_size = 4;
 		break;
 	case DRM_FORMAT_YUYV:

trunk/drivers/hwmon/pmbus/zl6100.c

@@ -200,11 +200,17 @@ static int zl6100_probe(struct i2c_client *client,
 	data->id = mid->driver_data;
 
 	/*
-	 * According to information from the chip vendor, all currently
-	 * supported chips are known to require a wait time between I2C
-	 * accesses.
+	 * ZL2005, ZL2008, ZL2105, and ZL6100 are known to require a wait time
+	 * between I2C accesses. ZL2004 and ZL6105 are known to be safe.
+	 * Other chips have not yet been tested.
+	 *
+	 * Only clear the wait time for chips known to be safe. The wait time
+	 * can be cleared later for additional chips if tests show that it
+	 * is not needed (in other words, better be safe than sorry).
 	 */
 	data->delay = delay;
+	if (data->id == zl2004 || data->id == zl6105)
+		data->delay = 0;
 
 	/*
 	 * Since there was a direct I2C device access above, wait before

trunk/drivers/hwmon/w83627ehf.c

@@ -39,7 +39,7 @@
 					       0x8860 0xa1
     w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
     w83627dhg-p  9      5       4       3      0xb070 0xc1    0x5ca3
-    w83627uhg    8      2       2       3      0xa230 0xc1    0x5ca3
+    w83627uhg    8      2       2       2      0xa230 0xc1    0x5ca3
     w83667hg     9      5       3       3      0xa510 0xc1    0x5ca3
     w83667hg-b   9      5       3       4      0xb350 0xc1    0x5ca3
     nct6775f     9      4       3       9      0xb470 0xc1    0x5ca3
@@ -1607,7 +1607,7 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
 	val = step_time_to_reg(val, data->pwm_mode[nr]); \
 	mutex_lock(&data->update_lock); \
 	data->reg[nr] = val; \
-	w83627ehf_write_value(data, data->REG_##REG[nr], val); \
+	w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
 	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
@@ -2004,8 +2004,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 		goto exit;
 	}
 
-	data = devm_kzalloc(&pdev->dev, sizeof(struct w83627ehf_data),
-			    GFP_KERNEL);
+	data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL);
 	if (!data) {
 		err = -ENOMEM;
 		goto exit_release;
@@ -2158,16 +2157,16 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 		w83627ehf_set_temp_reg_ehf(data, 3);
 
 		/*
-		 * Temperature sources for temp2 and temp3 are selected with
+		 * Temperature sources for temp1 and temp2 are selected with
 		 * bank 0, registers 0x49 and 0x4a.
 		 */
 		data->temp_src[0] = 0;	/* SYSTIN */
 		reg = w83627ehf_read_value(data, 0x49) & 0x07;
 		/* Adjust to have the same mapping as other source registers */
 		if (reg == 0)
-			data->temp_src[1] = 1;
+			data->temp_src[1]++;
 		else if (reg >= 2 && reg <= 5)
-			data->temp_src[1] = reg + 2;
+			data->temp_src[1] += 2;
 		else	/* should never happen */
 			data->have_temp &= ~(1 << 1);
 		reg = w83627ehf_read_value(data, 0x4a);
@@ -2494,8 +2493,9 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 
 exit_remove:
 	w83627ehf_device_remove_files(dev);
-exit_release:
+	kfree(data);
 	platform_set_drvdata(pdev, NULL);
+exit_release:
 	release_region(res->start, IOREGION_LENGTH);
 exit:
 	return err;
@@ -2509,6 +2509,7 @@ static int __devexit w83627ehf_remove(struct platform_device *pdev)
 	w83627ehf_device_remove_files(&pdev->dev);
 	release_region(data->addr, IOREGION_LENGTH);
 	platform_set_drvdata(pdev, NULL);
+	kfree(data);
 
 	return 0;
 }

trunk/drivers/i2c/algos/i2c-algo-bit.c

@@ -103,14 +103,8 @@ static int sclhi(struct i2c_algo_bit_data *adap)
 		 * chips may hold it low ("clock stretching") while they
 		 * are processing data internally.
 		 */
-		if (time_after(jiffies, start + adap->timeout)) {
-			/* Test one last time, as we may have been preempted
-			 * between last check and timeout test.
-			 */
-			if (getscl(adap))
-				break;
+		if (time_after(jiffies, start + adap->timeout))
 			return -ETIMEDOUT;
-		}
 		cond_resched();
 	}
 #ifdef DEBUG