---

yaml
---
r: 15159
b: refs/heads/master
c: 7116317
h: refs/heads/master
i:
  15157: b2adbb7
  15155: 3dd8698
  15151: 16b96da
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0afaa4fc4abc773ce129f41009a50eeecf3aa50c
+refs/heads/master: 7116317dc9148d783846299fc80a7d377baa6dca

trunk/arch/arm/kernel/module.c

@@ -101,6 +101,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			break;
 
 		case R_ARM_PC24:
+		case R_ARM_CALL:
+		case R_ARM_JUMP24:
 			offset = (*(u32 *)loc & 0x00ffffff) << 2;
 			if (offset & 0x02000000)
 				offset -= 0x04000000;

trunk/arch/arm/mach-pxa/pm.c

@@ -155,19 +155,20 @@ int pxa_pm_enter(suspend_state_t state)
 	PSPR = 0;
 
 	/* restore registers */
+	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
+	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
 	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
 	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
 	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
-	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
 	RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
 	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
 	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
 
 #ifdef CONFIG_PXA27x
 	RESTORE(MDREFR);
-	RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3);
-	RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
+	RESTORE_GPLEVEL(3); RESTORE(GPDR3);
+	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
+	RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
 	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
 	RESTORE(PFER); RESTORE(PKWR);
 #endif

trunk/arch/ia64/kernel/process.c

@@ -721,11 +721,13 @@ flush_thread (void)
 	/* drop floating-point and debug-register state if it exists: */
 	current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID);
 	ia64_drop_fpu(current);
+#ifdef CONFIG_IA32_SUPPORT
 	if (IS_IA32_PROCESS(ia64_task_regs(current))) {
 		ia32_drop_partial_page_list(current);
 		current->thread.task_size = IA32_PAGE_OFFSET;
 		set_fs(USER_DS);
 	}
+#endif
 }
 
 /*

trunk/drivers/input/mouse/alps.c

@@ -42,7 +42,7 @@ static struct alps_model_info alps_model_data[] = {
 	{ { 0x53, 0x02, 0x14 },	0xf8, 0xf8, 0 },
 	{ { 0x63, 0x02, 0x0a },	0xf8, 0xf8, 0 },
 	{ { 0x63, 0x02, 0x14 },	0xf8, 0xf8, 0 },
-	{ { 0x63, 0x02, 0x28 },	0xf8, 0xf8, 0 },
+	{ { 0x63, 0x02, 0x28 },	0xf8, 0xf8, ALPS_FW_BK_2 },		/* Fujitsu Siemens S6010 */
 	{ { 0x63, 0x02, 0x3c },	0x8f, 0x8f, ALPS_WHEEL },		/* Toshiba Satellite S2400-103 */
 	{ { 0x63, 0x02, 0x50 },	0xef, 0xef, ALPS_FW_BK_1 },		/* NEC Versa L320 */
 	{ { 0x63, 0x02, 0x64 },	0xf8, 0xf8, 0 },

trunk/drivers/mmc/mmc.c

@@ -679,7 +679,15 @@ static void mmc_idle_cards(struct mmc_host *host)
 }
 
 /*
- * Apply power to the MMC stack.
+ * Apply power to the MMC stack.  This is a two-stage process.
+ * First, we enable power to the card without the clock running.
+ * We then wait a bit for the power to stabilise.  Finally,
+ * enable the bus drivers and clock to the card.
+ *
+ * We must _NOT_ enable the clock prior to power stablising.
+ *
+ * If a host does all the power sequencing itself, ignore the
+ * initial MMC_POWER_UP stage.
  */
 static void mmc_power_up(struct mmc_host *host)
 {

trunk/drivers/scsi/ibmvscsi/ibmvscsi.h

@@ -100,7 +100,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 void ibmvscsi_release_crq_queue(struct crq_queue *queue,
 				struct ibmvscsi_host_data *hostdata,
 				int max_requests);
-void ibmvscsi_reset_crq_queue(struct crq_queue *queue,
+int ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 			      struct ibmvscsi_host_data *hostdata);
 
 void ibmvscsi_handle_crq(struct viosrp_crq *crq,

trunk/drivers/scsi/ibmvscsi/iseries_vscsi.c

@@ -117,9 +117,10 @@ void ibmvscsi_release_crq_queue(struct crq_queue *queue,
  *
  * no-op for iSeries
  */
-void ibmvscsi_reset_crq_queue(struct crq_queue *queue,
+int ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 			      struct ibmvscsi_host_data *hostdata)
 {
+	return 0;
 }
 
 /**

trunk/drivers/scsi/ibmvscsi/rpa_vscsi.c

@@ -230,6 +230,11 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 	rc = plpar_hcall_norets(H_REG_CRQ,
 				vdev->unit_address,
 				queue->msg_token, PAGE_SIZE);
+	if (rc == H_Resource) 
+		/* maybe kexecing and resource is busy. try a reset */
+		rc = ibmvscsi_reset_crq_queue(queue,
+					      hostdata);
+
 	if (rc == 2) {
 		/* Adapter is good, but other end is not ready */
 		printk(KERN_WARNING "ibmvscsi: Partner adapter not ready\n");
@@ -281,7 +286,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
  * @hostdata:	ibmvscsi_host_data of host
  *
  */
-void ibmvscsi_reset_crq_queue(struct crq_queue *queue,
+int ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 			      struct ibmvscsi_host_data *hostdata)
 {
 	int rc;
@@ -309,4 +314,5 @@ void ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 		printk(KERN_WARNING
 		       "ibmvscsi: couldn't register crq--rc 0x%x\n", rc);
 	}
+	return rc;
 }

trunk/drivers/scsi/megaraid.c

@@ -664,7 +664,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy)
 					sg->offset;
 			} else
 				buf = cmd->request_buffer;
-			memset(cmd->request_buffer, 0, cmd->cmnd[4]);
+			memset(buf, 0, cmd->cmnd[4]);
 			if (cmd->use_sg) {
 				struct scatterlist *sg;
 

trunk/drivers/scsi/qla2xxx/qla_def.h

@@ -2476,17 +2476,9 @@ typedef struct scsi_qla_host {
  */
 #define LOOP_TRANSITION(ha) \
 	(test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
-	 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
-
-#define LOOP_NOT_READY(ha) \
-	((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
-	  test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) || \
-	  test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
-	  test_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) || \
+	 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
 	 atomic_read(&ha->loop_state) == LOOP_DOWN)
 
-#define LOOP_RDY(ha)	(!LOOP_NOT_READY(ha))
-
 #define TGT_Q(ha, t) (ha->otgt[t])
 
 #define to_qla_host(x)		((scsi_qla_host_t *) (x)->hostdata)

trunk/drivers/scsi/qla2xxx/qla_init.c

@@ -1259,7 +1259,7 @@ qla2x00_configure_hba(scsi_qla_host_t *ha)
 	rval = qla2x00_get_adapter_id(ha,
 	    &loop_id, &al_pa, &area, &domain, &topo);
 	if (rval != QLA_SUCCESS) {
-		if (LOOP_NOT_READY(ha) || atomic_read(&ha->loop_down_timer) ||
+		if (LOOP_TRANSITION(ha) || atomic_read(&ha->loop_down_timer) ||
 		    (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
 			DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
 			    __func__, ha->host_no));
@@ -1796,7 +1796,7 @@ qla2x00_configure_loop(scsi_qla_host_t *ha)
 	}
 
 	if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
-		if (LOOP_NOT_READY(ha)) {
+		if (LOOP_TRANSITION(ha)) {
 			rval = QLA_FUNCTION_FAILED;
 		} else {
 			rval = qla2x00_configure_fabric(ha);
@@ -2369,7 +2369,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
 		if (qla2x00_is_reserved_id(ha, loop_id))
 			continue;
 
-		if (atomic_read(&ha->loop_down_timer) || LOOP_NOT_READY(ha))
+		if (atomic_read(&ha->loop_down_timer) || LOOP_TRANSITION(ha))
 			break;
 
 		if (swl != NULL) {

trunk/drivers/scsi/qla2xxx/qla_isr.c

@@ -909,6 +909,21 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
 			resid = resid_len;
 			cp->resid = resid;
 			CMD_RESID_LEN(cp) = resid;
+
+			if (!lscsi_status &&
+			    ((unsigned)(cp->request_bufflen - resid) <
+			     cp->underflow)) {
+				qla_printk(KERN_INFO, ha,
+				    "scsi(%ld:%d:%d:%d): Mid-layer underflow "
+				    "detected (%x of %x bytes)...returning "
+				    "error status.\n", ha->host_no,
+				    cp->device->channel, cp->device->id,
+				    cp->device->lun, resid,
+				    cp->request_bufflen);
+
+				cp->result = DID_ERROR << 16;
+				break;
+			}
 		}
 		cp->result = DID_OK << 16 | lscsi_status;
 

trunk/drivers/scsi/scsi_error.c

@@ -422,10 +422,15 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
  **/
 static void scsi_eh_done(struct scsi_cmnd *scmd)
 {
+	struct completion     *eh_action;
+
 	SCSI_LOG_ERROR_RECOVERY(3,
 		printk("%s scmd: %p result: %x\n",
 			__FUNCTION__, scmd, scmd->result));
-	complete(scmd->device->host->eh_action);
+
+	eh_action = scmd->device->host->eh_action;
+	if (eh_action)
+		complete(eh_action);
 }
 
 /**

trunk/drivers/scsi/scsi_lib.c

@@ -1085,6 +1085,26 @@ static void scsi_generic_done(struct scsi_cmnd *cmd)
 	scsi_io_completion(cmd, cmd->result == 0 ? cmd->bufflen : 0, 0);
 }
 
+void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd, int retries)
+{
+	struct request *req = cmd->request;
+
+	BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd));
+	memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
+	cmd->cmd_len = req->cmd_len;
+	if (!req->data_len)
+		cmd->sc_data_direction = DMA_NONE;
+	else if (rq_data_dir(req) == WRITE)
+		cmd->sc_data_direction = DMA_TO_DEVICE;
+	else
+		cmd->sc_data_direction = DMA_FROM_DEVICE;
+
+	cmd->transfersize = req->data_len;
+	cmd->allowed = retries;
+	cmd->timeout_per_command = req->timeout;
+}
+EXPORT_SYMBOL_GPL(scsi_setup_blk_pc_cmnd);
+
 static int scsi_prep_fn(struct request_queue *q, struct request *req)
 {
 	struct scsi_device *sdev = q->queuedata;
@@ -1220,18 +1240,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req)
 				goto kill;
 			}
 		} else {
-			memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
-			cmd->cmd_len = req->cmd_len;
-			if (rq_data_dir(req) == WRITE)
-				cmd->sc_data_direction = DMA_TO_DEVICE;
-			else if (req->data_len)
-				cmd->sc_data_direction = DMA_FROM_DEVICE;
-			else
-				cmd->sc_data_direction = DMA_NONE;
-
-			cmd->transfersize = req->data_len;
-			cmd->allowed = 3;
-			cmd->timeout_per_command = req->timeout;
+			scsi_setup_blk_pc_cmnd(cmd, 3);
 			cmd->done = scsi_generic_done;
 		}
 	}

trunk/drivers/scsi/sd.c

@@ -245,24 +245,10 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
 	 * SG_IO from block layer already setup, just copy cdb basically
 	 */
 	if (blk_pc_request(rq)) {
-		if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd))
-			return 0;
-
-		memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd));
-		SCpnt->cmd_len = rq->cmd_len;
-		if (rq_data_dir(rq) == WRITE)
-			SCpnt->sc_data_direction = DMA_TO_DEVICE;
-		else if (rq->data_len)
-			SCpnt->sc_data_direction = DMA_FROM_DEVICE;
-		else
-			SCpnt->sc_data_direction = DMA_NONE;
-
-		this_count = rq->data_len;
+		scsi_setup_blk_pc_cmnd(SCpnt, SD_PASSTHROUGH_RETRIES);
 		if (rq->timeout)
 			timeout = rq->timeout;
 
-		SCpnt->transfersize = rq->data_len;
-		SCpnt->allowed = SD_PASSTHROUGH_RETRIES;
 		goto queue;
 	}
 

trunk/drivers/scsi/sr.c

@@ -320,25 +320,11 @@ static int sr_init_command(struct scsi_cmnd * SCpnt)
 	 * these are already setup, just copy cdb basically
 	 */
 	if (SCpnt->request->flags & REQ_BLOCK_PC) {
-		struct request *rq = SCpnt->request;
+		scsi_setup_blk_pc_cmnd(SCpnt, MAX_RETRIES);
 
-		if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd))
-			return 0;
-
-		memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd));
-		SCpnt->cmd_len = rq->cmd_len;
-		if (!rq->data_len)
-			SCpnt->sc_data_direction = DMA_NONE;
-		else if (rq_data_dir(rq) == WRITE)
-			SCpnt->sc_data_direction = DMA_TO_DEVICE;
-		else
-			SCpnt->sc_data_direction = DMA_FROM_DEVICE;
-
-		this_count = rq->data_len;
-		if (rq->timeout)
-			timeout = rq->timeout;
+		if (SCpnt->timeout_per_command)
+			timeout = SCpnt->timeout_per_command;
 
-		SCpnt->transfersize = rq->data_len;
 		goto queue;
 	}
 

trunk/drivers/scsi/st.c

@@ -4194,27 +4194,10 @@ static void st_intr(struct scsi_cmnd *SCpnt)
  */
 static int st_init_command(struct scsi_cmnd *SCpnt)
 {
-	struct request *rq;
-
 	if (!(SCpnt->request->flags & REQ_BLOCK_PC))
 		return 0;
 
-	rq = SCpnt->request;
-	if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd))
-		return 0;
-
-	memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd));
-	SCpnt->cmd_len = rq->cmd_len;
-
-	if (rq_data_dir(rq) == WRITE)
-		SCpnt->sc_data_direction = DMA_TO_DEVICE;
-	else if (rq->data_len)
-		SCpnt->sc_data_direction = DMA_FROM_DEVICE;
-	else
-		SCpnt->sc_data_direction = DMA_NONE;
-
-	SCpnt->timeout_per_command = rq->timeout;
-	SCpnt->transfersize = rq->data_len;
+	scsi_setup_blk_pc_cmnd(SCpnt, 0);
 	SCpnt->done = st_intr;
 	return 1;
 }

trunk/drivers/scsi/sym53c8xx_2/sym_hipd.c

@@ -1405,7 +1405,6 @@ static void sym_check_goals(struct sym_hcb *np, struct scsi_target *starget,
 		goal->iu = 0;
 		goal->dt = 0;
 		goal->qas = 0;
-		goal->period = 0;
 		goal->offset = 0;
 		return;
 	}
@@ -1465,7 +1464,8 @@ static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgp
 	 * Many devices implement PPR in a buggy way, so only use it if we
 	 * really want to.
 	 */
-	if (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)) {
+	if (goal->offset &&
+	    (goal->iu || goal->dt || goal->qas || (goal->period < 0xa))) {
 		nego = NS_PPR;
 	} else if (spi_width(starget) != goal->width) {
 		nego = NS_WIDE;