---

yaml
---
r: 308528
b: refs/heads/master
c: d766023
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 21848d08bea8f057b3e48c00165dfd42e27eb4e9
+refs/heads/master: d766023eea566bb3c2a57a0567af5b271908fdc2

trunk/Documentation/00-INDEX

@@ -218,8 +218,6 @@ m68k/
 	- directory with info about Linux on Motorola 68k architecture.
 magic-number.txt
 	- list of magic numbers used to mark/protect kernel data structures.
-mca.txt
-	- info on supporting Micro Channel Architecture (e.g. PS/2) systems.
 md.txt
 	- info on boot arguments for the multiple devices driver.
 memory-barriers.txt

trunk/Documentation/ABI/testing/debugfs-pfo-nx-crypto

@@ -0,0 +1,45 @@
+What:		/sys/kernel/debug/nx-crypto/*
+Date:		March 2012
+KernelVersion:	3.4
+Contact:	Kent Yoder <key@linux.vnet.ibm.com>
+Description:
+
+  These debugfs interfaces are built by the nx-crypto driver, built in
+arch/powerpc/crypto/nx.
+
+Error Detection
+===============
+
+errors:
+- A u32 providing a total count of errors since the driver was loaded. The
+only errors counted here are those returned from the hcall, H_COP_OP.
+
+last_error:
+- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
+recorded here (the hcall will retry until -EBUSY goes away).
+
+last_error_pid:
+- The process ID of the process who received the most recent error from the
+hcall.
+
+Device Use
+==========
+
+aes_bytes:
+- The total number of bytes encrypted using AES in any of the driver's
+supported modes.
+
+aes_ops:
+- The total number of AES operations submitted to the hardware.
+
+sha256_bytes:
+- The total number of bytes hashed by the hardware using SHA-256.
+
+sha256_ops:
+- The total number of SHA-256 operations submitted to the hardware.
+
+sha512_bytes:
+- The total number of bytes hashed by the hardware using SHA-512.
+
+sha512_ops:
+- The total number of SHA-512 operations submitted to the hardware.

trunk/Documentation/ABI/testing/sysfs-devices-power

@@ -96,16 +96,26 @@ Description:
 		is read-only.  If the device is not enabled to wake up the
 		system from sleep states, this attribute is not present.
 
-What:		/sys/devices/.../power/wakeup_hit_count
-Date:		September 2010
+What:		/sys/devices/.../power/wakeup_abort_count
+Date:		February 2012
 Contact:	Rafael J. Wysocki <rjw@sisk.pl>
 Description:
-		The /sys/devices/.../wakeup_hit_count attribute contains the
+		The /sys/devices/.../wakeup_abort_count attribute contains the
 		number of times the processing of a wakeup event associated with
-		the device might prevent the system from entering a sleep state.
-		This attribute is read-only.  If the device is not enabled to
-		wake up the system from sleep states, this attribute is not
-		present.
+		the device might have aborted system transition into a sleep
+		state in progress.  This attribute is read-only.  If the device
+		is not enabled to wake up the system from sleep states, this
+		attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_expire_count
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_expire_count attribute contains the
+		number of times a wakeup event associated with the device has
+		been reported with a timeout that expired.  This attribute is
+		read-only.  If the device is not enabled to wake up the system
+		from sleep states, this attribute is not present.
 
 What:		/sys/devices/.../power/wakeup_active
 Date:		September 2010
@@ -148,6 +158,17 @@ Description:
 		not enabled to wake up the system from sleep states, this
 		attribute is not present.
 
+What:		/sys/devices/.../power/wakeup_prevent_sleep_time_ms
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
+		contains the total time the device has been preventing
+		opportunistic transitions to sleep states from occuring.
+		This attribute is read-only.  If the device is not enabled to
+		wake up the system from sleep states, this attribute is not
+		present.
+
 What:		/sys/devices/.../power/autosuspend_delay_ms
 Date:		September 2010
 Contact:	Alan Stern <stern@rowland.harvard.edu>

trunk/Documentation/ABI/testing/sysfs-driver-wacom

@@ -23,9 +23,10 @@ Contact:	linux-input@vger.kernel.org
 Description:
 		Attribute group for control of the status LEDs and the OLEDs.
 		This attribute group is only available for Intuos 4 M, L,
-		and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD
-		(LEDs only). Therefore its presence implicitly signifies the
-		presence of said LEDs and OLEDs on the tablet device.
+		and XL (with LEDs and OLEDs), Intuos 5 (LEDs only), and Cintiq
+		21UX2 and Cintiq 24HD (LEDs only). Therefore its presence
+		implicitly signifies the presence of said LEDs and OLEDs on the
+		tablet device.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
 Date:		August 2011
@@ -48,10 +49,10 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0
 Date:		August 2011
 Contact:	linux-input@vger.kernel.org
 Description:
-		Writing to this file sets which one of the four (for Intuos 4)
-		or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status
-		LEDs is active (0..3). The other three LEDs on the same side are
-		always inactive.
+		Writing to this file sets which one of the four (for Intuos 4
+		and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq
+		24HD) status LEDs is active (0..3). The other three LEDs on the
+		same side are always inactive.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
 Date:		September 2011

trunk/Documentation/ABI/testing/sysfs-power

@@ -172,3 +172,62 @@ Description:
 
 		Reading from this file will display the current value, which is
 		set to 1 MB by default.
+
+What:		/sys/power/autosleep
+Date:		April 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/autosleep file can be written one of the strings
+		returned by reads from /sys/power/state.  If that happens, a
+		work item attempting to trigger a transition of the system to
+		the sleep state represented by that string is queued up.  This
+		attempt will only succeed if there are no active wakeup sources
+		in the system at that time.  After every execution, regardless
+		of whether or not the attempt to put the system to sleep has
+		succeeded, the work item requeues itself until user space
+		writes "off" to /sys/power/autosleep.
+
+		Reading from this file causes the last string successfully
+		written to it to be returned.
+
+What:		/sys/power/wake_lock
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wake_lock file allows user space to create
+		wakeup source objects and activate them on demand (if one of
+		those wakeup sources is active, reads from the
+		/sys/power/wakeup_count file block or return false).  When a
+		string without white space is written to /sys/power/wake_lock,
+		it will be assumed to represent a wakeup source name.  If there
+		is a wakeup source object with that name, it will be activated
+		(unless active already).  Otherwise, a new wakeup source object
+		will be registered, assigned the given name and activated.
+		If a string written to /sys/power/wake_lock contains white
+		space, the part of the string preceding the white space will be
+		regarded as a wakeup source name and handled as descrived above.
+		The other part of the string will be regarded as a timeout (in
+		nanoseconds) such that the wakeup source will be automatically
+		deactivated after it has expired.  The timeout, if present, is
+		set regardless of the current state of the wakeup source object
+		in question.
+
+		Reads from this file return a string consisting of the names of
+		wakeup sources created with the help of it that are active at
+		the moment, separated with spaces.
+
+
+What:		/sys/power/wake_unlock
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wake_unlock file allows user space to deactivate
+		wakeup sources created with the help of /sys/power/wake_lock.
+		When a string is written to /sys/power/wake_unlock, it will be
+		assumed to represent the name of a wakeup source to deactivate.
+		If a wakeup source object of that name exists and is active at
+		the moment, it will be deactivated.
+
+		Reads from this file return a string consisting of the names of
+		wakeup sources created with the help of /sys/power/wake_lock
+		that are inactive at the moment, separated with spaces.

trunk/Documentation/DocBook/Makefile

@@ -6,7 +6,7 @@
 # To add a new book the only step required is to add the book to the
 # list of DOCBOOKS.
 
-DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
+DOCBOOKS := z8530book.xml device-drivers.xml \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
 	    writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \

trunk/Documentation/DocBook/kernel-api.tmpl

@@ -212,19 +212,6 @@ X!Edrivers/pci/hotplug.c
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c
      </sect1>
-     <sect1><title>MCA Architecture</title>
-	<sect2><title>MCA Device Functions</title>
-           <para>
-              Refer to the file arch/x86/kernel/mca_32.c for more information.
-           </para>
-<!-- FIXME: Removed for now since no structured comments in source
-X!Earch/x86/kernel/mca_32.c
--->
-	</sect2>
-	<sect2><title>MCA Bus DMA</title>
-!Iarch/x86/include/asm/mca_dma.h
-	</sect2>
-     </sect1>
   </chapter>
 
   <chapter id="firmware">

trunk/Documentation/DocBook/media/Makefile

@@ -70,6 +70,8 @@ IOCTLS = \
 	VIDIOC_SUBDEV_ENUM_MBUS_CODE \
 	VIDIOC_SUBDEV_ENUM_FRAME_SIZE \
 	VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \
+	VIDIOC_SUBDEV_G_SELECTION \
+	VIDIOC_SUBDEV_S_SELECTION \
 
 TYPES = \
 	$(shell perl -ne 'print "$$1 " if /^typedef\s+[^\s]+\s+([^\s]+)\;/' $(srctree)/include/linux/videodev2.h) \
@@ -193,7 +195,7 @@ DVB_DOCUMENTED = \
 #
 
 install_media_images = \
-	$(Q)cp $(OBJIMGFILES) $(MEDIA_OBJ_DIR)/media_api
+	$(Q)cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api
 
 $(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
 	$(Q)base64 -d $< >$@