Merge branch 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/t…

…mlind/linux-omap into omap/soc

arch/arm/mach-omap2/Kconfig

@@ -76,8 +76,13 @@ config SOC_OMAP3430
 	default y
 	select ARCH_OMAP_OTG
 
-config SOC_OMAPTI816X
-	bool "TI816X support"
+config SOC_OMAPTI81XX
+	bool "TI81XX support"
+	depends on ARCH_OMAP3
+	default y
+
+config SOC_OMAPAM33XX
+	bool "AM33XX support"
 	depends on ARCH_OMAP3
 	default y
 
@@ -314,7 +319,7 @@ config MACH_OMAP_3630SDP
 
 config MACH_TI8168EVM
 	bool "TI8168 Evaluation Module"
-	depends on SOC_OMAPTI816X
+	depends on SOC_OMAPTI81XX
 	default y
 
 config MACH_OMAP_4430SDP

arch/arm/mach-omap2/board-ti8168evm.c

@@ -35,17 +35,12 @@ static void __init ti8168_evm_init(void)
 	omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
 }
 
-static void __init ti8168_evm_map_io(void)
-{
-	omapti816x_map_common_io();
-}
-
 MACHINE_START(TI8168EVM, "ti8168evm")
 	/* Maintainer: Texas Instruments */
 	.atag_offset	= 0x100,
-	.map_io		= ti8168_evm_map_io,
-	.init_early	= ti816x_init_early,
-	.init_irq	= ti816x_init_irq,
+	.map_io		= ti81xx_map_io,
+	.init_early	= ti81xx_init_early,
+	.init_irq	= ti81xx_init_irq,
 	.timer		= &omap3_timer,
 	.init_machine	= ti8168_evm_init,
 MACHINE_END

arch/arm/mach-omap2/clock.c

@@ -35,7 +35,7 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-u8 cpu_mask;
+u16 cpu_mask;
 
 /*
  * clkdm_control: if true, then when a clock is enabled in the

arch/arm/mach-omap2/clock.h

@@ -132,7 +132,7 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
 
-extern u8 cpu_mask;
+extern u16 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;
 extern const struct clkops clkops_dummy;

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3517,6 +3517,10 @@ int __init omap3xxx_clk_init(void)
 	} else if (cpu_is_ti816x()) {
 		cpu_mask = RATE_IN_TI816X;
 		cpu_clkflg = CK_TI816X;
+	} else if (cpu_is_am33xx()) {
+		cpu_mask = RATE_IN_AM33XX;
+	} else if (cpu_is_ti814x()) {
+		cpu_mask = RATE_IN_TI814X;
 	} else if (cpu_is_omap34xx()) {
 		if (omap_rev() == OMAP3430_REV_ES1_0) {
 			cpu_mask = RATE_IN_3430ES1;
@@ -3600,7 +3604,7 @@ int __init omap3xxx_clk_init(void)
 	 * Lock DPLL5 -- here only until other device init code can
 	 * handle this
 	 */
-	if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0))
+	if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0))
 		omap3_clk_lock_dpll5();
 
 	/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */

arch/arm/mach-omap2/common.c

@@ -110,23 +110,49 @@ void __init omap3_map_io(void)
 
 /*
  * Adjust TAP register base such that omap3_check_revision accesses the correct
- * TI816X register for checking device ID (it adds 0x204 to tap base while
- * TI816X DEVICE ID register is at offset 0x600 from control base).
+ * TI81XX register for checking device ID (it adds 0x204 to tap base while
+ * TI81XX DEVICE ID register is at offset 0x600 from control base).
  */
-#define TI816X_TAP_BASE		(TI816X_CTRL_BASE + \
-				TI816X_CONTROL_DEVICE_ID - 0x204)
+#define TI81XX_TAP_BASE		(TI81XX_CTRL_BASE + \
+				TI81XX_CONTROL_DEVICE_ID - 0x204)
 
-static struct omap_globals ti816x_globals = {
+static struct omap_globals ti81xx_globals = {
 	.class  = OMAP343X_CLASS,
-	.tap    = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
-	.ctrl   = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
-	.prm    = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
-	.cm     = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
+	.tap    = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
+	.ctrl   = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
+	.prm    = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
+	.cm     = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
 };
 
-void __init omap2_set_globals_ti816x(void)
+void __init omap2_set_globals_ti81xx(void)
 {
-	__omap2_set_globals(&ti816x_globals);
+	__omap2_set_globals(&ti81xx_globals);
+}
+
+void __init ti81xx_map_io(void)
+{
+	omapti81xx_map_common_io();
+}
+
+#define AM33XX_TAP_BASE		(AM33XX_CTRL_BASE + \
+				TI81XX_CONTROL_DEVICE_ID - 0x204)
+
+static struct omap_globals am33xx_globals = {
+	.class  = AM335X_CLASS,
+	.tap    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE),
+	.ctrl   = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
+	.prm    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
+	.cm     = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
+};
+
+void __init omap2_set_globals_am33xx(void)
+{
+	__omap2_set_globals(&am33xx_globals);
+}
+
+void __init am33xx_map_io(void)
+{
+	omapam33xx_map_common_io();
 }
 #endif
 

arch/arm/mach-omap2/common.h

@@ -52,10 +52,18 @@ static inline void omap34xx_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAPTI816X
-extern void omapti816x_map_common_io(void);
+#ifdef CONFIG_SOC_OMAPTI81XX
+extern void omapti81xx_map_common_io(void);
 #else
-static inline void omapti816x_map_common_io(void)
+static inline void omapti81xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPAM33XX
+extern void omapam33xx_map_common_io(void);
+#else
+static inline void omapam33xx_map_common_io(void)
 {
 }
 #endif
@@ -82,7 +90,7 @@ void omap35xx_init_early(void);
 void omap3630_init_early(void);
 void omap3_init_early(void);	/* Do not use this one */
 void am35xx_init_early(void);
-void ti816x_init_early(void);
+void ti81xx_init_early(void);
 void omap4430_init_early(void);
 
 /*
@@ -106,7 +114,8 @@ void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_3xxx(void);
 void omap2_set_globals_443x(void);
-void omap2_set_globals_ti816x(void);
+void omap2_set_globals_ti81xx(void);
+void omap2_set_globals_am33xx(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
@@ -117,7 +126,9 @@ void omap2_set_globals_prcm(struct omap_globals *);
 void omap242x_map_io(void);
 void omap243x_map_io(void);
 void omap3_map_io(void);
+void am33xx_map_io(void);
 void omap4_map_io(void);
+void ti81xx_map_io(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition
@@ -146,7 +157,7 @@ extern struct device *omap4_get_dsp_device(void);
 
 void omap2_init_irq(void);
 void omap3_init_irq(void);
-void ti816x_init_irq(void);
+void ti81xx_init_irq(void);
 extern int omap_irq_pending(void);
 void omap_intc_save_context(void);
 void omap_intc_restore_context(void);

arch/arm/mach-omap2/control.h

@@ -52,8 +52,8 @@
 #define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
 #define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
 
-/* TI816X spefic control submodules */
-#define TI816X_CONTROL_DEVCONF		0x600
+/* TI81XX spefic control submodules */
+#define TI81XX_CONTROL_DEVCONF		0x600
 
 /* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
 
@@ -244,8 +244,8 @@
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
 #define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
 
-/* TI816X CONTROL_DEVCONF register offsets */
-#define TI816X_CONTROL_DEVICE_ID	(TI816X_CONTROL_DEVCONF + 0x000)
+/* TI81XX CONTROL_DEVCONF register offsets */
+#define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
 
 /*
  * REVISIT: This list of registers is not comprehensive - there are more

arch/arm/mach-omap2/id.c

@@ -226,7 +226,7 @@ static void __init omap4_check_features(void)
 	}
 }
 
-static void __init ti816x_check_features(void)
+static void __init ti81xx_check_features(void)
 {
 	omap_features = OMAP3_HAS_NEON;
 }
@@ -340,6 +340,29 @@ static void __init omap3_check_revision(const char **cpu_rev)
 			break;
 		}
 		break;
+	case 0xb944:
+		omap_revision = AM335X_REV_ES1_0;
+		*cpu_rev = "1.0";
+	case 0xb8f2:
+		switch (rev) {
+		case 0:
+		/* FALLTHROUGH */
+		case 1:
+			omap_revision = TI8148_REV_ES1_0;
+			*cpu_rev = "1.0";
+			break;
+		case 2:
+			omap_revision = TI8148_REV_ES2_0;
+			*cpu_rev = "2.0";
+			break;
+		case 3:
+		/* FALLTHROUGH */
+		default:
+			omap_revision = TI8148_REV_ES2_1;
+			*cpu_rev = "2.1";
+			break;
+		}
+		break;
 	default:
 		/* Unknown default to latest silicon rev as default */
 		omap_revision = OMAP3630_REV_ES1_2;
@@ -367,7 +390,7 @@ static void __init omap4_check_revision(void)
 	 * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
 	 * Use ARM register to detect the correct ES version
 	 */
-	if (!rev && (hawkeye != 0xb94e)) {
+	if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) {
 		idcode = read_cpuid(CPUID_ID);
 		rev = (idcode & 0xf) - 1;
 	}
@@ -389,8 +412,11 @@ static void __init omap4_check_revision(void)
 			omap_revision = OMAP4430_REV_ES2_1;
 			break;
 		case 4:
-		default:
 			omap_revision = OMAP4430_REV_ES2_2;
+			break;
+		case 6:
+		default:
+			omap_revision = OMAP4430_REV_ES2_3;
 		}
 		break;
 	case 0xb94e:
@@ -401,9 +427,17 @@ static void __init omap4_check_revision(void)
 			break;
 		}
 		break;
+	case 0xb975:
+		switch (rev) {
+		case 0:
+		default:
+			omap_revision = OMAP4470_REV_ES1_0;
+			break;
+		}
+		break;
 	default:
 		/* Unknown default to latest silicon rev as default */
-		omap_revision = OMAP4430_REV_ES2_2;
+		omap_revision = OMAP4430_REV_ES2_3;
 	}
 
 	pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
@@ -432,6 +466,10 @@ static void __init omap3_cpuinfo(const char *cpu_rev)
 		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
 	} else if (cpu_is_ti816x()) {
 		cpu_name = "TI816X";
+	} else if (cpu_is_am335x()) {
+		cpu_name =  "AM335X";
+	} else if (cpu_is_ti814x()) {
+		cpu_name = "TI814X";
 	} else if (omap3_has_iva() && omap3_has_sgx()) {
 		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
 		cpu_name = "OMAP3430/3530";
@@ -472,11 +510,11 @@ void __init omap2_check_revision(void)
 	} else if (cpu_is_omap34xx()) {
 		omap3_check_revision(&cpu_rev);
 
-		/* TI816X doesn't have feature register */
-		if (!cpu_is_ti816x())
+		/* TI81XX doesn't have feature register */
+		if (!cpu_is_ti81xx())
 			omap3_check_features();
 		else
-			ti816x_check_features();
+			ti81xx_check_features();
 
 		omap3_cpuinfo(cpu_rev);
 		return;

arch/arm/mach-omap2/include/mach/debug-macro.S

@@ -66,11 +66,11 @@ omap_uart_lsr:	.word	0
 		beq	34f			@ configure OMAP3UART4
 		cmp	\rp, #OMAP4UART4	@ only on 44xx
 		beq	44f			@ configure OMAP4UART4
-		cmp	\rp, #TI816XUART1	@ ti816x UART offsets different
+		cmp	\rp, #TI81XXUART1	@ ti81Xx UART offsets different
 		beq	81f			@ configure UART1
-		cmp	\rp, #TI816XUART2	@ ti816x UART offsets different
+		cmp	\rp, #TI81XXUART2	@ ti81Xx UART offsets different
 		beq	82f			@ configure UART2
-		cmp	\rp, #TI816XUART3	@ ti816x UART offsets different
+		cmp	\rp, #TI81XXUART3	@ ti81Xx UART offsets different
 		beq	83f			@ configure UART3
 		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
 		beq	95f			@ configure ZOOM_UART
@@ -94,11 +94,11 @@ omap_uart_lsr:	.word	0
 		b	98f
 44:		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
-81:		mov	\rp, #UART_OFFSET(TI816X_UART1_BASE)
+81:		mov	\rp, #UART_OFFSET(TI81XX_UART1_BASE)
 		b	98f
-82:		mov	\rp, #UART_OFFSET(TI816X_UART2_BASE)
+82:		mov	\rp, #UART_OFFSET(TI81XX_UART2_BASE)
 		b	98f
-83:		mov	\rp, #UART_OFFSET(TI816X_UART3_BASE)
+83:		mov	\rp, #UART_OFFSET(TI81XX_UART3_BASE)
 		b	98f
 
 95:		ldr	\rp, =ZOOM_UART_BASE