clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver

Add an LCC driver for IPQ806x that supports the i2s, S/PDIF, and
pcm clocks.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
[sboyd@codeaurora.org: Reworded commit text, added Kconfig
select, fleshed out Kconfig description a bit more, added pll4
configuration and reworked probe for it, added muxes, split out
dt-binding file]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Kenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

drivers/clk/qcom/Kconfig

@@ -29,6 +29,15 @@ config IPQ_GCC_806X
 	  Say Y if you want to use peripheral devices such as UART, SPI,
 	  i2c, USB, SD/eMMC, etc.
 
+config IPQ_LCC_806X
+	tristate "IPQ806x LPASS Clock Controller"
+	select IPQ_GCC_806X
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the LPASS clock controller on ipq806x devices.
+	  Say Y if you want to use audio devices such as i2s, pcm,
+	  S/PDIF, etc.
+
 config MSM_GCC_8660
 	tristate "MSM8660 Global Clock Controller"
 	depends on COMMON_CLK_QCOM

drivers/clk/qcom/Makefile

@@ -13,6 +13,7 @@ clk-qcom-y += reset.o
 obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
 obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
 obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
+obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
 obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o
 obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
 obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o

drivers/clk/qcom/gcc-ipq806x.c

@@ -75,6 +75,17 @@ static struct clk_pll pll3 = {
 	},
 };
 
+static struct clk_regmap pll4_vote = {
+	.enable_reg = 0x34c0,
+	.enable_mask = BIT(4),
+	.hw.init = &(struct clk_init_data){
+		.name = "pll4_vote",
+		.parent_names = (const char *[]){ "pll4" },
+		.num_parents = 1,
+		.ops = &clk_pll_vote_ops,
+	},
+};
+
 static struct clk_pll pll8 = {
 	.l_reg = 0x3144,
 	.m_reg = 0x3148,
@@ -2163,6 +2174,7 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[PLL0] = &pll0.clkr,
 	[PLL0_VOTE] = &pll0_vote,
 	[PLL3] = &pll3.clkr,
+	[PLL4_VOTE] = &pll4_vote,
 	[PLL8] = &pll8.clkr,
 	[PLL8_VOTE] = &pll8_vote,
 	[PLL14] = &pll14.clkr,