---

yaml
---
r: 225993
b: refs/heads/master
c: 206323c
h: refs/heads/master
i:
  225991: 3f50824
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 28bd2c341120db346f30b3ba11b4eac06b2cc981
+refs/heads/master: 206323c181371f3d5fab36c6d33e1fac09b61082

trunk/Documentation/ABI/testing/sysfs-platform-asus-laptop

@@ -47,6 +47,20 @@ Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
-		Control the bluetooth device. 1 means on, 0 means off.
+		Control the wlan device. 1 means on, 0 means off.
 		This may control the led, the device or both.
 Users:		Lapsus
+
+What:		/sys/devices/platform/asus_laptop/wimax
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wimax device. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/asus_laptop/wwan
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wwan (3G) device. 1 means on, 0 means off.

trunk/Documentation/ABI/testing/sysfs-platform-eeepc-wmi

@@ -0,0 +1,10 @@
+What:		/sys/devices/platform/eeepc-wmi/cpufv
+Date:		Oct 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Change CPU clock configuration (write-only).
+		There are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode

trunk/Documentation/filesystems/Locking

@@ -173,12 +173,13 @@ prototypes:
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
+	void (*freepage)(struct page *);
 	int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs);
 	int (*launder_page) (struct page *);
 
 locking rules:
-	All except set_page_dirty may block
+	All except set_page_dirty and freepage may block
 
 			BKL	PageLocked(page)	i_mutex
 writepage:		no	yes, unlocks (see below)
@@ -193,6 +194,7 @@ perform_write:		no	n/a			yes
 bmap:			no
 invalidatepage:		no	yes
 releasepage:		no	yes
+freepage:		no	yes
 direct_IO:		no
 launder_page:		no	yes
 
@@ -288,6 +290,9 @@ buffers from the page in preparation for freeing it.  It returns zero to
 indicate that the buffers are (or may be) freeable.  If ->releasepage is zero,
 the kernel assumes that the fs has no private interest in the buffers.
 
+	->freepage() is called when the kernel is done dropping the page
+from the page cache.
+
 	->launder_page() may be called prior to releasing a page if
 it is still found to be dirty. It returns zero if the page was successfully
 cleaned, or an error value if not. Note that in order to prevent the page

trunk/Documentation/filesystems/vfs.txt

@@ -534,6 +534,7 @@ struct address_space_operations {
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
+	void (*freepage)(struct page *);
 	ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs);
 	struct page* (*get_xip_page)(struct address_space *, sector_t,
@@ -678,6 +679,12 @@ struct address_space_operations {
         need to ensure this.  Possibly it can clear the PageUptodate
         bit if it cannot free private data yet.
 
+  freepage: freepage is called once the page is no longer visible in
+        the page cache in order to allow the cleanup of any private
+	data. Since it may be called by the memory reclaimer, it
+	should not assume that the original address_space mapping still
+	exists, and it should not block.
+
   direct_IO: called by the generic read/write routines to perform
         direct_IO - that is IO requests which bypass the page cache
         and transfer data directly between the storage and the

trunk/MAINTAINERS

@@ -559,14 +559,14 @@ W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
 ARM/BCMRING ARM ARCHITECTURE
-M:	Leo Chen <leochen@broadcom.com>
+M:	Jiandong Zheng <jdzheng@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-bcmring
 
 ARM/BCMRING MTD NAND DRIVER
-M:	Leo Chen <leochen@broadcom.com>
+M:	Jiandong Zheng <jdzheng@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
@@ -815,7 +815,7 @@ F:	drivers/mmc/host/msm_sdcc.c
 F:	drivers/mmc/host/msm_sdcc.h
 F:	drivers/serial/msm_serial.h
 F:	drivers/serial/msm_serial.c
-T:	git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git
+T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -5932,7 +5932,6 @@ F:	include/linux/tty.h
 
 TULIP NETWORK DRIVERS
 M:	Grant Grundler <grundler@parisc-linux.org>
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/tulip/
@@ -6584,6 +6583,15 @@ F:	include/linux/mfd/wm8400*
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/wm*
 
+WORKQUEUE
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-kernel@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
+S:	Maintained
+F:	include/linux/workqueue.h
+F:	kernel/workqueue.c
+F:	Documentation/workqueue.txt
+
 X.25 NETWORK LAYER
 M:	Andrew Hendry <andrew.hendry@gmail.com>
 L:	linux-x25@vger.kernel.org

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -14,6 +14,7 @@ config ARM
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
 	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
@@ -999,8 +1000,8 @@ source arch/arm/mm/Kconfig
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
-	default y if PXA27x || PXA3xx || ARCH_MMP
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
+	default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1205,10 +1206,11 @@ config SMP
 	depends on EXPERIMENTAL
 	depends on GENERIC_CLOCKEVENTS
 	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
-		 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+		 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
+		 ARCH_MSM_SCORPIONMP
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU
+	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1283,6 +1285,7 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP && HOTPLUG && EXPERIMENTAL
+	depends on !ARCH_MSM
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1291,7 +1294,7 @@ config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP
 	default y
-	select HAVE_ARM_TWD
+	select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1311,7 +1314,7 @@ config HZ
 
 config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode"
-	depends on CPU_V7 && EXPERIMENTAL
+	depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
 	select AEABI
 	select ARM_ASM_UNIFIED
 	help
@@ -1759,7 +1762,7 @@ comment "At least one emulation must be selected"
 
 config FPE_NWFPE
 	bool "NWFPE math emulation"
-	depends on !AEABI || OABI_COMPAT
+	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
 	---help---
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently

trunk/arch/arm/Kconfig.debug

@@ -23,7 +23,7 @@ config STRICT_DEVMEM
 config FRAME_POINTER
 	bool
 	depends on !THUMB2_KERNEL
-	default y if !ARM_UNWIND
+	default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and
 	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,

trunk/arch/arm/include/asm/hw_breakpoint.h

@@ -20,8 +20,8 @@ struct arch_hw_breakpoint_ctrl {
 struct arch_hw_breakpoint {
 	u32	address;
 	u32	trigger;
-	struct perf_event *suspended_wp;
-	struct arch_hw_breakpoint_ctrl ctrl;
+	struct	arch_hw_breakpoint_ctrl step_ctrl;
+	struct	arch_hw_breakpoint_ctrl ctrl;
 };
 
 static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)

trunk/arch/arm/include/asm/system.h

@@ -63,6 +63,11 @@
 #include <asm/outercache.h>
 
 #define __exception	__attribute__((section(".exception.text")))
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#define __exception_irq_entry	__irq_entry
+#else
+#define __exception_irq_entry	__exception
+#endif
 
 struct thread_info;
 struct task_struct;

trunk/arch/arm/include/asm/traps.h

@@ -15,13 +15,32 @@ struct undef_hook {
 void register_undef_hook(struct undef_hook *hook);
 void unregister_undef_hook(struct undef_hook *hook);
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static inline int __in_irqentry_text(unsigned long ptr)
+{
+	extern char __irqentry_text_start[];
+	extern char __irqentry_text_end[];
+
+	return ptr >= (unsigned long)&__irqentry_text_start &&
+	       ptr < (unsigned long)&__irqentry_text_end;
+}
+#else
+static inline int __in_irqentry_text(unsigned long ptr)
+{
+	return 0;
+}
+#endif
+
 static inline int in_exception_text(unsigned long ptr)
 {
 	extern char __exception_text_start[];
 	extern char __exception_text_end[];
+	int in;
+
+	in = ptr >= (unsigned long)&__exception_text_start &&
+	     ptr < (unsigned long)&__exception_text_end;
 
-	return ptr >= (unsigned long)&__exception_text_start &&
-	       ptr < (unsigned long)&__exception_text_end;
+	return in ? : __in_irqentry_text(ptr);
 }
 
 extern void __init early_trap_init(void);

trunk/arch/arm/kernel/Makefile

@@ -5,7 +5,7 @@
 CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
 AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
 
-ifdef CONFIG_DYNAMIC_FTRACE
+ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
@@ -33,6 +33,7 @@ obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags.o
@@ -50,6 +51,7 @@ AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
 obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
+obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_CPU_HAS_PMU)	+= pmu.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o

trunk/arch/arm/kernel/entry-armv.S

@@ -198,6 +198,7 @@ __dabt_svc:
 	@
 	@ set desired IRQ state, then call main handler
 	@
+	debug_entry r1
 	msr	cpsr_c, r9
 	mov	r2, sp
 	bl	do_DataAbort
@@ -324,6 +325,7 @@ __pabt_svc:
 #else
 	bl	CPU_PABORT_HANDLER
 #endif
+	debug_entry r1
 	msr	cpsr_c, r9			@ Maybe enable interrupts
 	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
@@ -439,6 +441,7 @@ __dabt_usr:
 	@
 	@ IRQs on, then call the main handler
 	@
+	debug_entry r1
 	enable_irq
 	mov	r2, sp
 	adr	lr, BSYM(ret_from_exception)
@@ -703,6 +706,7 @@ __pabt_usr:
 #else
 	bl	CPU_PABORT_HANDLER
 #endif
+	debug_entry r1
 	enable_irq				@ Enable interrupts
 	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler