Merge branch 'ux500-gpio-pins-for-arm-soc' of git://git.kernel.org/pu…

…b/scm/linux/kernel/git/linusw/linux-stericsson into next/gpio

Linus Walleij <linus.walleij@linaro.org> writes:

 This is a pull request for the GPIO and pin control stuff
 accumulated in the ST-Ericsson tree. Here we have:

 - Improvements and fixes and a custom pin config API from
   Rabin Vincent

 - Device Tree bindings from Lee Jones

 - Some accumulated patches by yours truly.

 - A MSP platform data init patch from Ola Lilja that is merged
   here due to dependency on pin config work. It is to be
   used with work being worked on in parallel in the ALSA
   SoC subsystem.

 If you wonder about the custom pin config implementation this
 is to be used as a transition base as I am rewriting the
 driver to use pinctrl. Expect a final pull request on top
 of this one that will move the ux500 over to pinctrl.

* 'ux500-gpio-pins-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: Add support for MSP I2S-devices
  drivers/gpio: gpio-nomadik: Add support for irqdomains
  drivers/gpio: gpio-nomadik: Apply Device Tree bindings
  ARM: ux500: update pin handling
  ARM: ux500: implement pin API
  ARM: ux500: remove a bunch of internal pull-ups
  plat-nomadik: new sleep mode pincfg macros
  gpio/nomadik: use ioremap() instead of static mappings
  gpio/nomadik: support low EMI mode
  gpio/nomadik: fix spurious interrupts with SKE
  gpio/nomadik: cache [rf]w?imsc
  gpio/nomadik: don't set SLPM to 1 for non-wakeup pins

Also includes an update to v3.4-rc4.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/DocBook/media/v4l/pixfmt-nv12m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-NV12M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-YUV420M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

MAINTAINERS

@@ -2321,9 +2321,9 @@ S:	Supported
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-M:	Randy Dunlap <rdunlap@xenotime.net>
+M:	Rob Landley <rob@landley.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt http://xenotime.net/kernel-doc-patches/current/
+T:	TBD
 S:	Maintained
 F:	Documentation/
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/configs/imx_v4_v5_defconfig

@@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_FB=y

arch/arm/configs/u8500_defconfig

@@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_U8500=y
-CONFIG_UX500_SOC_DB5500=y
-CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
@@ -39,7 +37,6 @@ CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
@@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_NOMADIK=y
-CONFIG_I2C=y
-CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_AB8500_BM=y
+CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
+CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y

arch/arm/mach-at91/at91rm9200_devices.c

@@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void)
 		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}

arch/arm/mach-at91/at91rm9200_time.c

@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clockchips.h>
+#include <linux/export.h>
 
 #include <asm/mach/time.h>
 
@@ -176,6 +177,7 @@ static struct clock_event_device clkevt = {
 };
 
 void __iomem *at91_st_base;
+EXPORT_SYMBOL_GPL(at91_st_base);
 
 void __init at91rm9200_ioremap_st(u32 addr)
 {

arch/arm/mach-at91/board-rm9200ek.c

@@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	SZ_2M
+#define EK_FLASH_SIZE	SZ_8M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,

arch/arm/mach-at91/board-sam9261ek.c

@@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = {
 		.flags	= IORESOURCE_MEM
 	},
 	[2] = {
-		.start	= AT91_PIN_PC11,
-		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
 			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
@@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
 
 static void __init ek_add_device_dm9000(void)
 {
+	struct resource *r = &dm9000_resource[2];
+
 	/* Configure chip-select 2 (DM9000) */
 	sam9_smc_configure(0, 2, &dm9000_smc_config);
 
@@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void)
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(AT91_PIN_PC11, 0);
 
+	r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
 	platform_device_register(&dm9000_device);
 }
 #else

arch/arm/mach-at91/clock.c

@@ -35,6 +35,7 @@
 #include "generic.h"
 
 void __iomem *at91_pmc_base;
+EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 /*
  * There's a lot more which can be done with clocks, including cpufreq

arch/arm/mach-at91/include/mach/at91_pmc.h

@@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base;
 #define at91_pmc_write(field, value) \
 	__raw_writel(value, at91_pmc_base + field)
 #else
-.extern at91_aic_base
+.extern at91_pmc_base
 #endif
 
 #define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */

arch/arm/mach-at91/setup.c

@@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority)
 }
 
 void __iomem *at91_ramc_base[2];
+EXPORT_SYMBOL_GPL(at91_ramc_base);
 
 void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
 {
@@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr)
 }
 
 void __iomem *at91_matrix_base;
+EXPORT_SYMBOL_GPL(at91_matrix_base);
 
 void __init at91_ioremap_matrix(u32 base_addr)
 {

arch/arm/mach-bcmring/core.c

@@ -52,8 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
-static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
+static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
+static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
 
 static struct clk pll1_clk = {
 	.name = "PLL1",

arch/arm/mach-imx/imx27-dt.c

@@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
 static int __init imx27_avic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	irq_domain_add_simple(np, 0);
+	irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
 	return 0;
 }
 
@@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np,
 {
 	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
-	irq_domain_add_simple(np, gpio_irq_base);
+	gpio_irq_base -= 32;
+	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
+				NULL);
 
 	return 0;
 }

arch/arm/mach-imx/mm-imx5.c

@@ -35,7 +35,7 @@ static void imx5_idle(void)
 	}
 	clk_enable(gpc_dvfs_clk);
 	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-	if (tzic_enable_wake() != 0)
+	if (!tzic_enable_wake())
 		cpu_do_idle();
 	clk_disable(gpc_dvfs_clk);
 }

arch/arm/mach-omap1/mux.c

@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
+#include <mach/hardware.h>
 
 #include <plat/mux.h>
 

arch/arm/mach-omap1/timer.c

@@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
 	int n = (pdev->id - 1) << 1;
 	u32 l;
 
-	l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
 	l |= source << n;
-	__raw_writel(l, MOD_CONF_CTRL_1);
+	omap_writel(l, MOD_CONF_CTRL_1);
 
 	return 0;
 }

arch/arm/mach-omap2/board-4430sdp.c

@@ -20,6 +20,7 @@
 #include <linux/usb/otg.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/gpio_keys.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -560,15 +561,15 @@ static struct regulator_init_data sdp4430_vusim = {
 	},
 };
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
 	.hf_left_step	= 0x1d,
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_vibra_data twl6040_vibra = {
+static struct twl6040_vibra_data twl6040_vibra = {
 	.vibldrv_res = 8,
 	.vibrdrv_res = 3,
 	.viblmotor_res = 10,
@@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = {
 	.vddvibr_uV = 0,	/* fixed volt supply - VBAT */
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {
-	.audio		= &twl6040_audio,
 	/* Regulators */
 	.vusim		= &sdp4430_vusim,
 	.vaux1		= &sdp4430_vaux1,
@@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
 			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
+	omap4_pmic_init("twl6030", &sdp4430_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));

arch/arm/mach-omap2/board-generic.c

@@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
 
 static void __init omap4_i2c_init(void)
 {
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
+	omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
 }
 
 static void __init omap4_init(void)

arch/arm/mach-omap2/board-omap4panda.c

@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
@@ -284,25 +285,22 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
 	.hf_left_step	= 0x1d,
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata = {
-	.audio		= &twl6040_audio,
-};
+static struct twl4030_platform_data omap4_panda_twldata;
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void)
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
 			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &omap4_panda_twldata);
+	omap4_pmic_init("twl6030", &omap4_panda_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP

arch/arm/mach-omap2/omap_hwmod.c

@@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		goto dis_opt_clks;
 	_write_sysconfig(v, oh);
 
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
 	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
 		omap_test_timeout((omap_hwmod_read(oh,
 						    oh->class->sysc->syss_offs)
@@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
  */
 int omap_hwmod_softreset(struct omap_hwmod *oh)
 {
-	if (!oh)
+	u32 v;
+	int ret;
+
+	if (!oh || !(oh->_sysc_cache))
 		return -EINVAL;
 
-	return _ocp_softreset(oh);
+	v = oh->_sysc_cache;
+	ret = _set_softreset(oh, &v);
+	if (ret)
+		goto error;
+	_write_sysconfig(v, oh);
+
+error:
+	return ret;
 }
 
 /**

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
 			.flags	= OMAP_FIREWALL_L4,
 		}
 	},
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
 	.slave		= &omap2430_dss_venc_hwmod,
 	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };