---

yaml
---
r: 286335
b: refs/heads/master
c: 8ca2dd8
h: refs/heads/master
i:
  286333: 11e9132
  286331: 5ad9c66
  286327: b00d68d
  286319: 23123be
  286303: a5dab53
  286271: aacdc5d
  286207: 9e886a4
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6bc6204e3b7f4ac235e98e362714213369d6a012
+refs/heads/master: 8ca2dd87e7f29df99389e9dc41f7a45a35223672

trunk/drivers/scsi/bfa/bfa_defs_svc.h

@@ -673,12 +673,7 @@ struct bfa_itnim_iostats_s {
 	u32	tm_iocdowns;		/*  TM cleaned-up due to IOC down   */
 	u32	tm_cleanups;		/*  TM cleanup requests	*/
 	u32	tm_cleanup_comps;	/*  TM cleanup completions	*/
-	u32	lm_lun_across_sg;	/*  LM lun is across sg data buf */
-	u32	lm_lun_not_sup;		/*  LM lun not supported */
-	u32	lm_rpl_data_changed;	/*  LM report-lun data changed */
-	u32	lm_wire_residue_changed; /* LM report-lun rsp residue changed */
-	u32	lm_small_buf_addresidue; /* LM buf smaller than reported cnt */
-	u32	lm_lun_not_rdy;		/* LM lun not ready */
+	u32	rsvd[6];
 };
 
 /* Modify char* port_stt[] in bfal_port.c if a new state was added */

trunk/drivers/scsi/bfa/bfa_fc.h

@@ -56,161 +56,6 @@ struct scsi_cdb_s {
 
 #define SCSI_MAX_ALLOC_LEN      0xFF    /* maximum allocarion length */
 
-#define SCSI_SENSE_CUR_ERR	0x70
-#define SCSI_SENSE_DEF_ERR	0x71
-
-/*
- * SCSI additional sense codes
- */
-#define SCSI_ASC_LUN_NOT_READY		0x04
-#define SCSI_ASC_LUN_NOT_SUPPORTED	0x25
-#define SCSI_ASC_TOCC			0x3F
-
-/*
- * SCSI additional sense code qualifiers
- */
-#define SCSI_ASCQ_MAN_INTR_REQ		0x03	/* manual intervention req */
-#define SCSI_ASCQ_RL_DATA_CHANGED	0x0E	/* report luns data changed */
-
-/*
- * Methods of reporting informational exceptions
- */
-#define SCSI_MP_IEC_UNIT_ATTN		0x2	/* generate unit attention */
-
-struct scsi_report_luns_data_s {
-	u32		lun_list_length;	/* length of LUN list length */
-	u32		reserved;
-	struct scsi_lun	lun[1];			/* first LUN in lun list */
-};
-
-struct scsi_inquiry_vendor_s {
-	u8	vendor_id[8];
-};
-
-struct scsi_inquiry_prodid_s {
-	u8	product_id[16];
-};
-
-struct scsi_inquiry_prodrev_s {
-	u8	product_rev[4];
-};
-
-struct scsi_inquiry_data_s {
-#ifdef __BIG_ENDIAN
-	u8		peripheral_qual:3;	/* peripheral qualifier */
-	u8		device_type:5;		/* peripheral device type */
-	u8		rmb:1;			/* removable medium bit */
-	u8		device_type_mod:7;	/* device type modifier */
-	u8		version;
-	u8		aenc:1;		/* async evt notification capability */
-	u8		trm_iop:1;	/* terminate I/O process */
-	u8		norm_aca:1;	/* normal ACA supported */
-	u8		hi_support:1;	/* SCSI-3: supports REPORT LUNS */
-	u8		rsp_data_format:4;
-	u8		additional_len;
-	u8		sccs:1;
-	u8		reserved1:7;
-	u8		reserved2:1;
-	u8		enc_serv:1;	/* enclosure service component */
-	u8		reserved3:1;
-	u8		multi_port:1;	/* multi-port device */
-	u8		m_chngr:1;	/* device in medium transport element */
-	u8		ack_req_q:1;	/* SIP specific bit */
-	u8		addr32:1;	/* SIP specific bit */
-	u8		addr16:1;	/* SIP specific bit */
-	u8		rel_adr:1;	/* relative address */
-	u8		w_bus32:1;
-	u8		w_bus16:1;
-	u8		synchronous:1;
-	u8		linked_commands:1;
-	u8		trans_dis:1;
-	u8		cmd_queue:1;	/* command queueing supported */
-	u8		soft_reset:1;	/* soft reset alternative (VS) */
-#else
-	u8		device_type:5;	/* peripheral device type */
-	u8		peripheral_qual:3; /* peripheral qualifier */
-	u8		device_type_mod:7; /* device type modifier */
-	u8		rmb:1;		/* removable medium bit */
-	u8		version;
-	u8		rsp_data_format:4;
-	u8		hi_support:1;	/* SCSI-3: supports REPORT LUNS */
-	u8		norm_aca:1;	/* normal ACA supported */
-	u8		terminate_iop:1;/* terminate I/O process */
-	u8		aenc:1;		/* async evt notification capability */
-	u8		additional_len;
-	u8		reserved1:7;
-	u8		sccs:1;
-	u8		addr16:1;	/* SIP specific bit */
-	u8		addr32:1;	/* SIP specific bit */
-	u8		ack_req_q:1;	/* SIP specific bit */
-	u8		m_chngr:1;	/* device in medium transport element */
-	u8		multi_port:1;	/* multi-port device */
-	u8		reserved3:1;	/* TBD - Vendor Specific */
-	u8		enc_serv:1;	/* enclosure service component */
-	u8		reserved2:1;
-	u8		soft_seset:1;	/* soft reset alternative (VS) */
-	u8		cmd_queue:1;	/* command queueing supported */
-	u8		trans_dis:1;
-	u8		linked_commands:1;
-	u8		synchronous:1;
-	u8		w_bus16:1;
-	u8		w_bus32:1;
-	u8		rel_adr:1;	/* relative address */
-#endif
-	struct scsi_inquiry_vendor_s	vendor_id;
-	struct scsi_inquiry_prodid_s	product_id;
-	struct scsi_inquiry_prodrev_s	product_rev;
-	u8		vendor_specific[20];
-	u8		reserved4[40];
-};
-
-/*
- *	SCSI sense data format
- */
-struct scsi_sense_s {
-#ifdef __BIG_ENDIAN
-	u8		valid:1;
-	u8		rsp_code:7;
-#else
-	u8		rsp_code:7;
-	u8		valid:1;
-#endif
-	u8		seg_num;
-#ifdef __BIG_ENDIAN
-	u8		file_mark:1;
-	u8		eom:1;		/* end of media */
-	u8		ili:1;		/* incorrect length indicator */
-	u8		reserved:1;
-	u8		sense_key:4;
-#else
-	u8		sense_key:4;
-	u8		reserved:1;
-	u8		ili:1;		/* incorrect length indicator */
-	u8		eom:1;		/* end of media */
-	u8		file_mark:1;
-#endif
-	u8		information[4];	/* device-type or cmd specific info */
-	u8		add_sense_length; /* additional sense length */
-	u8		command_info[4];/* command specific information */
-	u8		asc;		/* additional sense code */
-	u8		ascq;		/* additional sense code qualifier */
-	u8		fru_code;	/* field replaceable unit code */
-#ifdef __BIG_ENDIAN
-	u8		sksv:1;		/* sense key specific valid */
-	u8		c_d:1;		/* command/data bit */
-	u8		res1:2;
-	u8		bpv:1;		/* bit pointer valid */
-	u8		bpointer:3;	/* bit pointer */
-#else
-	u8		bpointer:3;	/* bit pointer */
-	u8		bpv:1;		/* bit pointer valid */
-	u8		res1:2;
-	u8		c_d:1;		/* command/data bit */
-	u8		sksv:1;		/* sense key specific valid */
-#endif
-	u8		fpointer[2];	/* field pointer */
-};
-
 /*
  * Fibre Channel Header Structure (FCHS) definition
  */