---

yaml
---
r: 116335
b: refs/heads/master
c: 72558dd
h: refs/heads/master
i:
  116333: b19c932
  116331: c34a6ce
  116327: 54c050f
  116319: 2b17ed2
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 769b49ce68386b21e45bb6e573b63c02020b17a1
+refs/heads/master: 72558dde738b06cc01e16b3247a9659ca739e22d

trunk/.mailmap

@@ -66,6 +66,7 @@ Kenneth W Chen <kenneth.w.chen@intel.com>
 Koushik <raghavendra.koushik@neterion.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Linas Vepstas <linas@austin.ibm.com>
+Mark Brown <broonie@sirena.org.uk>
 Matthieu CASTET <castet.matthieu@free.fr>
 Michael Buesch <mb@bu3sch.de>
 Michael Buesch <mbuesch@freenet.de>

trunk/CREDITS

@@ -1653,14 +1653,14 @@ S: Chapel Hill, North Carolina 27514-4818
 S: USA
 
 N: Dave Jones
-E: davej@codemonkey.org.uk
+E: davej@redhat.com
 W: http://www.codemonkey.org.uk
-D: x86 errata/setup maintenance.
-D: AGPGART driver.
+D: Assorted VIA x86 support.
+D: 2.5 AGPGART overhaul.
 D: CPUFREQ maintenance.
-D: Backport/Forwardport merge monkey.
-D: Various Janitor work.
-S: United Kingdom
+D: Fedora kernel maintainence.
+D: Misc/Other.
+S: 314 Littleton Rd, Westford, MA 01886, USA
 
 N: Martin Josfsson
 E: gandalf@wlug.westbo.se

trunk/Documentation/ABI/stable/sysfs-driver-usb-usbtmc

@@ -0,0 +1,62 @@
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" section 4.2.1.8.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class, Subclass
+		USB488 Specification (USBTMC-USB488) Revision 1.0" section
+		4.2.2.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		This file is the TermChar value to be sent to the USB TMC
+		device as described by the document, "Universal Serial Bus Test
+		and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.
+
+		Note that the TermCharEnabled file determines if this value is
+		sent to the device or not.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		This file determines if the TermChar is to be sent to the
+		device on every transaction or not.  For more details about
+		this, please see the document, "Universal Serial Bus Test and
+		Measurement Class Specification (USBTMC) Revision 1.0" as
+		published by the USB-IF.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		This file determines if the the transaction of the USB TMC
+		device is to be automatically aborted if there is any error.
+		For more details about this, please see the document,
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.

trunk/Documentation/ABI/testing/sysfs-bus-usb

@@ -85,3 +85,19 @@ Description:
 Users:
 		PowerTOP <power@bughost.org>
 		http://www.lesswatts.org/projects/powertop/
+
+What:		/sys/bus/usb/device/<busnum>-<devnum>...:<config num>-<interface num>/supports_autosuspend
+Date:		January 2008
+KernelVersion:	2.6.27
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		When read, this file returns 1 if the interface driver
+		for this interface supports autosuspend.  It also
+		returns 1 if no driver has claimed this interface, as an
+		unclaimed interface will not stop the device from being
+		autosuspended if all other interface drivers are idle.
+		The file returns 0 if autosuspend support has not been
+		added to the driver.
+Users:
+		USB PM tool
+		git://git.moblin.org/users/sarah/usb-pm-tool/

trunk/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg

@@ -0,0 +1,43 @@
+Where:		/sys/bus/usb/.../powered
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls whether the device's display will powered.
+		A value of 0 is off and a non-zero value is on.
+
+Where:		/sys/bus/usb/.../mode_msb
+Where:		/sys/bus/usb/.../mode_lsb
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls the devices display mode.
+		For a 6 character display the values are
+			MSB 0x06; LSB 0x3F, and
+		for an 8 character display the values are
+			MSB 0x08; LSB 0xFF.
+
+Where:		/sys/bus/usb/.../textmode
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls the way the device interprets its text buffer.
+		raw:	each character controls its segment manually
+		hex:	each character is between 0-15
+		ascii:	each character is between '0'-'9' and 'A'-'F'.
+
+Where:		/sys/bus/usb/.../text
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	The text (or data) for the device to display
+
+Where:		/sys/bus/usb/.../decimals
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls the decimal places on the device.
+		To set the nth decimal place, give this field
+		the value of 10 ** n. Assume this field has
+		the value k and has 1 or more decimal places set,
+		to set the mth place (where m is not already set),
+		change this fields value to k + 10 ** m.

trunk/Documentation/DocBook/gadget.tmpl

@@ -557,6 +557,9 @@ Near-term plans include converting all of them, except for "gadgetfs".
 </para>
 
 !Edrivers/usb/gadget/f_acm.c
+!Edrivers/usb/gadget/f_ecm.c
+!Edrivers/usb/gadget/f_subset.c
+!Edrivers/usb/gadget/f_obex.c
 !Edrivers/usb/gadget/f_serial.c
 
 </sect1>

trunk/Documentation/cgroups/freezer-subsystem.txt

@@ -0,0 +1,99 @@
+	The cgroup freezer is useful to batch job management system which start
+and stop sets of tasks in order to schedule the resources of a machine
+according to the desires of a system administrator. This sort of program
+is often used on HPC clusters to schedule access to the cluster as a
+whole. The cgroup freezer uses cgroups to describe the set of tasks to
+be started/stopped by the batch job management system. It also provides
+a means to start and stop the tasks composing the job.
+
+	The cgroup freezer will also be useful for checkpointing running groups
+of tasks. The freezer allows the checkpoint code to obtain a consistent
+image of the tasks by attempting to force the tasks in a cgroup into a
+quiescent state. Once the tasks are quiescent another task can
+walk /proc or invoke a kernel interface to gather information about the
+quiesced tasks. Checkpointed tasks can be restarted later should a
+recoverable error occur. This also allows the checkpointed tasks to be
+migrated between nodes in a cluster by copying the gathered information
+to another node and restarting the tasks there.
+
+	Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping
+and resuming tasks in userspace. Both of these signals are observable
+from within the tasks we wish to freeze. While SIGSTOP cannot be caught,
+blocked, or ignored it can be seen by waiting or ptracing parent tasks.
+SIGCONT is especially unsuitable since it can be caught by the task. Any
+programs designed to watch for SIGSTOP and SIGCONT could be broken by
+attempting to use SIGSTOP and SIGCONT to stop and resume tasks. We can
+demonstrate this problem using nested bash shells:
+
+	$ echo $$
+	16644
+	$ bash
+	$ echo $$
+	16690
+
+	From a second, unrelated bash shell:
+	$ kill -SIGSTOP 16690
+	$ kill -SIGCONT 16990
+
+	<at this point 16990 exits and causes 16644 to exit too>
+
+	This happens because bash can observe both signals and choose how it
+responds to them.
+
+	Another example of a program which catches and responds to these
+signals is gdb. In fact any program designed to use ptrace is likely to
+have a problem with this method of stopping and resuming tasks.
+
+	 In contrast, the cgroup freezer uses the kernel freezer code to
+prevent the freeze/unfreeze cycle from becoming visible to the tasks
+being frozen. This allows the bash example above and gdb to run as
+expected.
+
+	The freezer subsystem in the container filesystem defines a file named
+freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the
+cgroup. Subsequently writing "THAWED" will unfreeze the tasks in the cgroup.
+Reading will return the current state.
+
+* Examples of usage :
+
+   # mkdir /containers/freezer
+   # mount -t cgroup -ofreezer freezer  /containers
+   # mkdir /containers/0
+   # echo $some_pid > /containers/0/tasks
+
+to get status of the freezer subsystem :
+
+   # cat /containers/0/freezer.state
+   THAWED
+
+to freeze all tasks in the container :
+
+   # echo FROZEN > /containers/0/freezer.state
+   # cat /containers/0/freezer.state
+   FREEZING
+   # cat /containers/0/freezer.state
+   FROZEN
+
+to unfreeze all tasks in the container :
+
+   # echo THAWED > /containers/0/freezer.state
+   # cat /containers/0/freezer.state
+   THAWED
+
+This is the basic mechanism which should do the right thing for user space task
+in a simple scenario.
+
+It's important to note that freezing can be incomplete. In that case we return
+EBUSY. This means that some tasks in the cgroup are busy doing something that
+prevents us from completely freezing the cgroup at this time. After EBUSY,
+the cgroup will remain partially frozen -- reflected by freezer.state reporting
+"FREEZING" when read. The state will remain "FREEZING" until one of these
+things happens:
+
+	1) Userspace cancels the freezing operation by writing "THAWED" to
+		the freezer.state file
+	2) Userspace retries the freezing operation by writing "FROZEN" to
+		the freezer.state file (writing "FREEZING" is not legal
+		and returns EIO)
+	3) The tasks that blocked the cgroup from entering the "FROZEN"
+		state disappear from the cgroup's set of tasks.

trunk/Documentation/controllers/memory.txt

@@ -112,14 +112,22 @@ the per cgroup LRU.
 
 2.2.1 Accounting details
 
-All mapped pages (RSS) and unmapped user pages (Page Cache) are accounted.
-RSS pages are accounted at the time of page_add_*_rmap() unless they've already
-been accounted for earlier. A file page will be accounted for as Page Cache;
-it's mapped into the page tables of a process, duplicate accounting is carefully
-avoided. Page Cache pages are accounted at the time of add_to_page_cache().
-The corresponding routines that remove a page from the page tables or removes
-a page from Page Cache is used to decrement the accounting counters of the
-cgroup.
+All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
+(some pages which never be reclaimable and will not be on global LRU
+ are not accounted. we just accounts pages under usual vm management.)
+
+RSS pages are accounted at page_fault unless they've already been accounted
+for earlier. A file page will be accounted for as Page Cache when it's
+inserted into inode (radix-tree). While it's mapped into the page tables of
+processes, duplicate accounting is carefully avoided.
+
+A RSS page is unaccounted when it's fully unmapped. A PageCache page is
+unaccounted when it's removed from radix-tree.
+
+At page migration, accounting information is kept.
+
+Note: we just account pages-on-lru because our purpose is to control amount
+of used pages. not-on-lru pages are tend to be out-of-control from vm view.
 
 2.3 Shared Page Accounting
 

trunk/Documentation/cpusets.txt

@@ -48,7 +48,7 @@ hooks, beyond what is already present, required to manage dynamic
 job placement on large systems.
 
 Cpusets use the generic cgroup subsystem described in
-Documentation/cgroup.txt.
+Documentation/cgroups/cgroups.txt.
 
 Requests by a task, using the sched_setaffinity(2) system call to
 include CPUs in its CPU affinity mask, and using the mbind(2) and

trunk/Documentation/devices.txt

@@ -2571,6 +2571,9 @@ Your cooperation is appreciated.
 		160 = /dev/usb/legousbtower0	1st USB Legotower device
 		    ...
 		175 = /dev/usb/legousbtower15	16th USB Legotower device
+		176 = /dev/usb/usbtmc1	First USB TMC device
+		   ...
+		192 = /dev/usb/usbtmc16	16th USB TMC device
 		240 = /dev/usb/dabusb0	First daubusb device
 		    ...
 		243 = /dev/usb/dabusb3	Fourth dabusb device

trunk/Documentation/filesystems/ext3.txt

@@ -96,6 +96,11 @@ errors=remount-ro(*)	Remount the filesystem read-only on an error.
 errors=continue		Keep going on a filesystem error.
 errors=panic		Panic and halt the machine if an error occurs.
 
+data_err=ignore(*)	Just print an error message if an error occurs
+			in a file data buffer in ordered mode.
+data_err=abort		Abort the journal if an error occurs in a file
+			data buffer in ordered mode.
+
 grpid			Give objects the same group ID as their creator.
 bsdgroups