---

yaml
---
r: 327381
b: refs/heads/master
c: cc72d10
h: refs/heads/master
i:
  327379: 56a4a6e
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 044b722f36a17bc5f7f472cc3246cb15a430bb0e
+refs/heads/master: cc72d100a3f4ba42a9ad02ebe52c0c6c7c496267

trunk/Documentation/devicetree/bindings/net/cpsw.txt

@@ -0,0 +1,104 @@
+TI SoC Ethernet Switch Controller Device Tree Bindings
+------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "ti,cpsw"
+- reg			: physical base address and size of the cpsw
+			  registers map
+- interrupts		: property with a value describing the interrupt
+			  number
+- interrupt-parent	: The parent interrupt controller
+- cpdma_channels 	: Specifies number of channels in CPDMA
+- host_port_no		: Specifies host port shift
+- cpdma_reg_ofs		: Specifies CPDMA submodule register offset
+- ale_reg_ofs		: Specifies ALE submodule register offset
+- ale_entries		: Specifies No of entries ALE can hold
+- host_port_reg_ofs	: Specifies host port register offset
+- hw_stats_reg_ofs	: Specifies hardware statistics register offset
+- bd_ram_ofs		: Specifies internal desciptor RAM offset
+- bd_ram_size		: Specifies internal descriptor RAM size
+- rx_descs		: Specifies number of Rx descriptors
+- mac_control		: Specifies Default MAC control register content
+			  for the specific platform
+- slaves		: Specifies number for slaves
+- slave_reg_ofs		: Specifies slave register offset
+- sliver_reg_ofs	: Specifies slave sliver register offset
+- phy_id		: Specifies slave phy id
+- mac-address		: Specifies slave MAC address
+
+Optional properties:
+- ti,hwmods		: Must be "cpgmac0"
+- no_bd_ram		: Must be 0 or 1
+
+Note: "ti,hwmods" field is used to fetch the base address and irq
+resources from TI, omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Examples:
+
+	mac: ethernet@4A100000 {
+		compatible = "ti,cpsw";
+		reg = <0x4A100000 0x1000>;
+		interrupts = <55 0x4>;
+		interrupt-parent = <&intc>;
+		cpdma_channels = 8;
+		host_port_no = 0;
+		cpdma_reg_ofs = 0x800;
+		ale_reg_ofs = 0xd00;
+		ale_entries = 1024;
+		host_port_reg_ofs = 0x108;
+		hw_stats_reg_ofs = 0x900;
+		bd_ram_ofs = 0x2000;
+		bd_ram_size = 0x2000;
+		no_bd_ram = 0;
+		rx_descs = 64;
+		mac_control = 0x20;
+		slaves = 2;
+		slave@0 {
+			slave_reg_ofs = 0x208;
+			sliver_reg_ofs = 0xd80;
+			phy_id = "davinci_mdio-0:00"
+			mac-address = [00 04 9F 01 1B B8];
+		};
+		slave@1 {
+			slave_reg_ofs = 0x208;
+			sliver_reg_ofs = 0xd80;
+			phy_id = "davinci_mdio-0:01"
+			mac-address = [00 04 9F 01 1B B9];
+		};
+	};
+
+(or)
+
+	mac: ethernet@4A100000 {
+		compatible = "ti,cpsw";
+		ti,hwmods = "cpgmac0";
+		cpdma_channels = 8;
+		host_port_no = 0;
+		cpdma_reg_ofs = 0x800;
+		ale_reg_ofs = 0xd00;
+		ale_entries = 1024;
+		host_port_reg_ofs = 0x108;
+		hw_stats_reg_ofs = 0x900;
+		bd_ram_ofs = 0x2000;
+		bd_ram_size = 0x2000;
+		no_bd_ram = 0;
+		rx_descs = 64;
+		mac_control = 0x20;
+		slaves = 2;
+		slave@0 {
+			slave_reg_ofs = 0x208;
+			sliver_reg_ofs = 0xd80;
+			phy_id = "davinci_mdio-0:00"
+			mac-address = [00 04 9F 01 1B B8];
+		};
+		slave@1 {
+			slave_reg_ofs = 0x208;
+			sliver_reg_ofs = 0xd80;
+			phy_id = "davinci_mdio-0:01"
+			mac-address = [00 04 9F 01 1B B9];
+		};
+
+	};

trunk/drivers/bcma/host_pci.c

@@ -272,6 +272,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
 	{ 0, },
 };

trunk/drivers/bcma/sprom.c

@@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available(struct bcma_bus *bus)
 		/* for these chips OTP is always available */
 		present = true;
 		break;
-
+	case BCMA_CHIP_ID_BCM43228:
+		present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT;
+		break;
 	default:
 		present = false;
 		break;

trunk/drivers/isdn/isdnloop/isdnloop.c

@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include "isdnloop.h"
 
-static char *revision = "$Revision: 1.11.6.7 $";
 static char *isdnloop_id = "loop0";
 
 MODULE_DESCRIPTION("ISDN4Linux: Pseudo Driver that simulates an ISDN card");
@@ -1494,17 +1493,6 @@ isdnloop_addcard(char *id1)
 static int __init
 isdnloop_init(void)
 {
-	char *p;
-	char rev[10];
-
-	if ((p = strchr(revision, ':'))) {
-		strcpy(rev, p + 1);
-		p = strchr(rev, '$');
-		*p = 0;
-	} else
-		strcpy(rev, " ??? ");
-	printk(KERN_NOTICE "isdnloop-ISDN-driver Rev%s\n", rev);
-
 	if (isdnloop_id)
 		return (isdnloop_addcard(isdnloop_id));
 

trunk/drivers/net/cris/eth_v10.c

@@ -1712,7 +1712,7 @@ e100_set_network_leds(int active)
 static void
 e100_netpoll(struct net_device* netdev)
 {
-	e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL);
+	e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev);
 }
 #endif
 

trunk/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c

@@ -2485,6 +2485,7 @@ static int bnx2x_mcast_enqueue_cmd(struct bnx2x *bp,
 		break;
 
 	default:
+		kfree(new_cmd);
 		BNX2X_ERR("Unknown command: %d\n", cmd);
 		return -EINVAL;
 	}

trunk/drivers/net/ethernet/emulex/benet/be_main.c

@@ -1948,7 +1948,7 @@ static int be_rx_cqs_create(struct be_adapter *adapter)
 
 	if (adapter->num_rx_qs != MAX_RX_QS)
 		dev_info(&adapter->pdev->dev,
-			"Created only %d receive queues", adapter->num_rx_qs);
+			"Created only %d receive queues\n", adapter->num_rx_qs);
 
 	return 0;
 }

trunk/drivers/net/ethernet/mellanox/mlx4/en_rx.c

@@ -614,8 +614,8 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
 		/* If source MAC is equal to our own MAC and not performing
 		 * the selftest or flb disabled - drop the packet */
 		if (s_mac == priv->mac &&
-			(!(dev->features & NETIF_F_LOOPBACK) ||
-			 !priv->validate_loopback))
+		    !((dev->features & NETIF_F_LOOPBACK) ||
+		      priv->validate_loopback))
 			goto next;
 
 		/*

trunk/drivers/net/ethernet/mellanox/mlx4/en_tx.c

@@ -164,7 +164,6 @@ int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
 	ring->cons = 0xffffffff;
 	ring->last_nr_txbb = 1;
 	ring->poll_cnt = 0;
-	ring->blocked = 0;
 	memset(ring->tx_info, 0, ring->size * sizeof(struct mlx4_en_tx_info));
 	memset(ring->buf, 0, ring->buf_size);
 
@@ -365,14 +364,13 @@ static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq)
 	ring->cons += txbbs_skipped;
 	netdev_tx_completed_queue(ring->tx_queue, packets, bytes);
 
-	/* Wakeup Tx queue if this ring stopped it */
-	if (unlikely(ring->blocked)) {
-		if ((u32) (ring->prod - ring->cons) <=
-		     ring->size - HEADROOM - MAX_DESC_TXBBS) {
-			ring->blocked = 0;
-			netif_tx_wake_queue(ring->tx_queue);
-			priv->port_stats.wake_queue++;
-		}
+	/*
+	 * Wakeup Tx queue if this stopped, and at least 1 packet
+	 * was completed
+	 */
+	if (netif_tx_queue_stopped(ring->tx_queue) && txbbs_skipped > 0) {
+		netif_tx_wake_queue(ring->tx_queue);
+		priv->port_stats.wake_queue++;
 	}
 }
 
@@ -592,7 +590,6 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		     ring->size - HEADROOM - MAX_DESC_TXBBS)) {
 		/* every full Tx ring stops queue */
 		netif_tx_stop_queue(ring->tx_queue);
-		ring->blocked = 1;
 		priv->port_stats.queue_stopped++;
 
 		return NETDEV_TX_BUSY;

trunk/drivers/net/ethernet/mellanox/mlx4/main.c

@@ -157,9 +157,6 @@ int mlx4_check_port_params(struct mlx4_dev *dev,
 					 "on this HCA, aborting.\n");
 				return -EINVAL;
 			}
-			if (port_type[i] == MLX4_PORT_TYPE_ETH &&
-			    port_type[i + 1] == MLX4_PORT_TYPE_IB)
-				return -EINVAL;
 		}
 	}
 

trunk/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h

@@ -248,7 +248,6 @@ struct mlx4_en_tx_ring {
 	u32 doorbell_qpn;
 	void *buf;
 	u16 poll_cnt;
-	int blocked;
 	struct mlx4_en_tx_info *tx_info;
 	u8 *bounce_buf;
 	u32 last_nr_txbb;

trunk/drivers/net/ethernet/mellanox/mlx4/sense.c

@@ -80,20 +80,6 @@ void mlx4_do_sense_ports(struct mlx4_dev *dev,
 			stype[i - 1] = defaults[i - 1];
 	}
 
-	/*
-	 * Adjust port configuration:
-	 * If port 1 sensed nothing and port 2 is IB, set both as IB
-	 * If port 2 sensed nothing and port 1 is Eth, set both as Eth
-	 */
-	if (stype[0] == MLX4_PORT_TYPE_ETH) {
-		for (i = 1; i < dev->caps.num_ports; i++)
-			stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_ETH;
-	}
-	if (stype[dev->caps.num_ports - 1] == MLX4_PORT_TYPE_IB) {
-		for (i = 0; i < dev->caps.num_ports - 1; i++)
-			stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_IB;
-	}
-
 	/*
 	 * If sensed nothing, remain in current configuration.
 	 */

trunk/drivers/net/ethernet/sfc/efx.c

@@ -1503,6 +1503,11 @@ static int efx_probe_all(struct efx_nic *efx)
 		goto fail2;
 	}
 
+	BUILD_BUG_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_RXQ_MIN_ENT);
+	if (WARN_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_TXQ_MIN_ENT(efx))) {
+		rc = -EINVAL;
+		goto fail3;
+	}
 	efx->rxq_entries = efx->txq_entries = EFX_DEFAULT_DMAQ_SIZE;
 
 	rc = efx_probe_filters(efx);
@@ -2070,6 +2075,7 @@ static int efx_register_netdev(struct efx_nic *efx)
 	net_dev->irq = efx->pci_dev->irq;
 	net_dev->netdev_ops = &efx_netdev_ops;
 	SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops);
+	net_dev->gso_max_segs = EFX_TSO_MAX_SEGS;
 
 	rtnl_lock();
 

trunk/drivers/net/ethernet/sfc/efx.h

@@ -30,6 +30,7 @@ extern netdev_tx_t
 efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb);
 extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index);
 extern int efx_setup_tc(struct net_device *net_dev, u8 num_tc);
+extern unsigned int efx_tx_max_skb_descs(struct efx_nic *efx);
 
 /* RX */
 extern int efx_probe_rx_queue(struct efx_rx_queue *rx_queue);
@@ -52,10 +53,15 @@ extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue);
 #define EFX_MAX_EVQ_SIZE 16384UL
 #define EFX_MIN_EVQ_SIZE 512UL
 
-/* The smallest [rt]xq_entries that the driver supports. Callers of
- * efx_wake_queue() assume that they can subsequently send at least one
- * skb. Falcon/A1 may require up to three descriptors per skb_frag. */
-#define EFX_MIN_RING_SIZE (roundup_pow_of_two(2 * 3 * MAX_SKB_FRAGS))
+/* Maximum number of TCP segments we support for soft-TSO */
+#define EFX_TSO_MAX_SEGS	100
+
+/* The smallest [rt]xq_entries that the driver supports.  RX minimum
+ * is a bit arbitrary.  For TX, we must have space for at least 2
+ * TSO skbs.
+ */
+#define EFX_RXQ_MIN_ENT		128U
+#define EFX_TXQ_MIN_ENT(efx)	(2 * efx_tx_max_skb_descs(efx))
 
 /* Filters */
 extern int efx_probe_filters(struct efx_nic *efx);

trunk/drivers/net/ethernet/sfc/ethtool.c

@@ -680,21 +680,27 @@ static int efx_ethtool_set_ringparam(struct net_device *net_dev,
 				     struct ethtool_ringparam *ring)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	u32 txq_entries;
 
 	if (ring->rx_mini_pending || ring->rx_jumbo_pending ||
 	    ring->rx_pending > EFX_MAX_DMAQ_SIZE ||
 	    ring->tx_pending > EFX_MAX_DMAQ_SIZE)
 		return -EINVAL;
 
-	if (ring->rx_pending < EFX_MIN_RING_SIZE ||
-	    ring->tx_pending < EFX_MIN_RING_SIZE) {
+	if (ring->rx_pending < EFX_RXQ_MIN_ENT) {
 		netif_err(efx, drv, efx->net_dev,
-			  "TX and RX queues cannot be smaller than %ld\n",
-			  EFX_MIN_RING_SIZE);
+			  "RX queues cannot be smaller than %u\n",
+			  EFX_RXQ_MIN_ENT);
 		return -EINVAL;
 	}
 
-	return efx_realloc_channels(efx, ring->rx_pending, ring->tx_pending);
+	txq_entries = max(ring->tx_pending, EFX_TXQ_MIN_ENT(efx));
+	if (txq_entries != ring->tx_pending)
+		netif_warn(efx, drv, efx->net_dev,
+			   "increasing TX queue size to minimum of %u\n",
+			   txq_entries);
+
+	return efx_realloc_channels(efx, ring->rx_pending, txq_entries);
 }
 
 static int efx_ethtool_set_pauseparam(struct net_device *net_dev,

trunk/drivers/net/ethernet/sfc/tx.c

@@ -119,6 +119,25 @@ efx_max_tx_len(struct efx_nic *efx, dma_addr_t dma_addr)
 	return len;
 }
 
+unsigned int efx_tx_max_skb_descs(struct efx_nic *efx)
+{
+	/* Header and payload descriptor for each output segment, plus
+	 * one for every input fragment boundary within a segment
+	 */
+	unsigned int max_descs = EFX_TSO_MAX_SEGS * 2 + MAX_SKB_FRAGS;
+
+	/* Possibly one more per segment for the alignment workaround */
+	if (EFX_WORKAROUND_5391(efx))
+		max_descs += EFX_TSO_MAX_SEGS;
+
+	/* Possibly more for PCIe page boundaries within input fragments */
+	if (PAGE_SIZE > EFX_PAGE_SIZE)
+		max_descs += max_t(unsigned int, MAX_SKB_FRAGS,
+				   DIV_ROUND_UP(GSO_MAX_SIZE, EFX_PAGE_SIZE));
+
+	return max_descs;
+}
+
 /*
  * Add a socket buffer to a TX queue
  *

trunk/drivers/net/ethernet/ti/Kconfig

@@ -32,7 +32,7 @@ config TI_DAVINCI_EMAC
 
 config TI_DAVINCI_MDIO
 	tristate "TI DaVinci MDIO Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
 	select PHYLIB
 	---help---
 	  This driver supports TI's DaVinci MDIO module.
@@ -42,7 +42,7 @@ config TI_DAVINCI_MDIO
 
 config TI_DAVINCI_CPDMA
 	tristate "TI DaVinci CPDMA Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
 	---help---
 	  This driver supports TI's DaVinci CPDMA dma engine.