---

yaml
---
r: 45327
b: refs/heads/master
c: d0abc45
h: refs/heads/master
i:
  45325: 52ae7f7
  45323: 9104bca
  45319: 4b824d2
  45311: 843a8d0
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 7f422e2e84307bdd9b51c19a602e1601d160aebc
+refs/heads/master: d0abc451a685a8d8a5b05db660b06199786981b1

trunk/Documentation/feature-removal-schedule.txt

@@ -226,6 +226,23 @@ Who:	Jean Delvare <khali@linux-fr.org>
 
 ---------------------------
 
+What:	i2c_adapter.dev
+	i2c_adapter.list
+When:	July 2007
+Why:	Superfluous, given i2c_adapter.class_dev:
+	  * The "dev" was a stand-in for the physical device node that legacy
+	    drivers would not have; but now it's almost always present.  Any
+	    remaining legacy drivers must upgrade (they now trigger warnings).
+	  * The "list" duplicates class device children.
+	The delay in removing this is so upgraded lm_sensors and libsensors
+	can get deployed.  (Removal causes minor changes in the sysfs layout,
+	notably the location of the adapter type name and parenting the i2c
+	client hardware directly from their controller.)
+Who:	Jean Delvare <khali@linux-fr.org>,
+	David Brownell <dbrownell@users.sourceforge.net>
+
+---------------------------
+
 What:	IPv4 only connection tracking/NAT/helpers
 When:	2.6.22
 Why:	The new layer 3 independant connection tracking replaces the old

trunk/Documentation/usb/acm.txt

@@ -46,6 +46,10 @@ Abstract Control Model (USB CDC ACM) specification.
 
 	3Com USR ISDN Pro TA
 
+  Some cell phones also connect via USB. I know the following phones work:
+
+	SonyEricsson K800i
+
   Unfortunately many modems and most ISDN TAs use proprietary interfaces and
 thus won't work with this drivers. Check for ACM compliance before buying.
 

trunk/MAINTAINERS

@@ -2579,6 +2579,12 @@ P:	Adam Belay
 M:	ambx1@neo.rr.com
 S:	Maintained
 
+PNXxxxx I2C DRIVER
+P:	Vitaly Wool
+M:	vitalywool@gmail.com
+L:	i2c@lm-sensors.org
+S:	Maintained
+
 PPP PROTOCOL DRIVERS AND COMPRESSORS
 P:	Paul Mackerras
 M:	paulus@samba.org

trunk/arch/i386/Kconfig

@@ -777,6 +777,47 @@ config CRASH_DUMP
           PHYSICAL_START.
 	  For more details see Documentation/kdump/kdump.txt
 
+config PHYSICAL_START
+	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
+	default "0x100000"
+	help
+	  This gives the physical address where the kernel is loaded.
+
+	  If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
+	  bzImage will decompress itself to above physical address and
+	  run from there. Otherwise, bzImage will run from the address where
+	  it has been loaded by the boot loader and will ignore above physical
+	  address.
+
+	  In normal kdump cases one does not have to set/change this option
+	  as now bzImage can be compiled as a completely relocatable image
+	  (CONFIG_RELOCATABLE=y) and be used to load and run from a different
+	  address. This option is mainly useful for the folks who don't want
+	  to use a bzImage for capturing the crash dump and want to use a
+	  vmlinux instead. vmlinux is not relocatable hence a kernel needs
+	  to be specifically compiled to run from a specific memory area
+	  (normally a reserved region) and this option comes handy.
+
+	  So if you are using bzImage for capturing the crash dump, leave
+	  the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
+	  Otherwise if you plan to use vmlinux for capturing the crash dump
+	  change this value to start of the reserved region (Typically 16MB
+	  0x1000000). In other words, it can be set based on the "X" value as
+	  specified in the "crashkernel=YM@XM" command line boot parameter
+	  passed to the panic-ed kernel. Typically this parameter is set as
+	  crashkernel=64M@16M. Please take a look at
+	  Documentation/kdump/kdump.txt for more details about crash dumps.
+
+	  Usage of bzImage for capturing the crash dump is recommended as
+	  one does not have to build two kernels. Same kernel can be used
+	  as production kernel and capture kernel. Above option should have
+	  gone away after relocatable bzImage support is introduced. But it
+	  is present because there are users out there who continue to use
+	  vmlinux for dump capture. This option should go away down the
+	  line.
+
+	  Don't change this unless you know what you are doing.
+
 config RELOCATABLE
 	bool "Build a relocatable kernel(EXPERIMENTAL)"
 	depends on EXPERIMENTAL

trunk/arch/i386/kernel/cpu/common.c

@@ -54,7 +54,7 @@ static struct cpu_dev __cpuinitdata default_cpu = {
 	.c_init	= default_init,
 	.c_vendor = "Unknown",
 };
-static struct cpu_dev * this_cpu = &default_cpu;
+static struct cpu_dev * this_cpu __cpuinitdata = &default_cpu;
 
 static int __init cachesize_setup(char *str)
 {

trunk/arch/i386/kernel/smpboot.c

@@ -227,7 +227,7 @@ static struct {
 	atomic_t count_start;
 	atomic_t count_stop;
 	unsigned long long values[NR_CPUS];
-} tsc __initdata = {
+} tsc __cpuinitdata = {
 	.start_flag = ATOMIC_INIT(0),
 	.count_start = ATOMIC_INIT(0),
 	.count_stop = ATOMIC_INIT(0),
@@ -332,7 +332,7 @@ static void __init synchronize_tsc_bp(void)
 		printk("passed.\n");
 }
 
-static void __init synchronize_tsc_ap(void)
+static void __cpuinit synchronize_tsc_ap(void)
 {
 	int i;
 

trunk/arch/i386/kernel/trampoline.S

@@ -38,6 +38,11 @@
 
 .data
 
+/* We can free up trampoline after bootup if cpu hotplug is not supported. */
+#ifndef CONFIG_HOTPLUG_CPU
+.section ".init.data","aw",@progbits
+#endif
+
 .code16
 
 ENTRY(trampoline_data)

trunk/drivers/acpi/toshiba_acpi.c

@@ -321,13 +321,16 @@ static int set_lcd_status(struct backlight_device *bd)
 static unsigned long write_lcd(const char *buffer, unsigned long count)
 {
 	int value;
-	int ret = count;
+	int ret;
 
 	if (sscanf(buffer, " brightness : %i", &value) == 1 &&
-	    value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS)
+	    value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) {
 		ret = set_lcd(value);
-	else
+		if (ret == 0)
+			ret = count;
+	} else {
 		ret = -EINVAL;
+	}
 	return ret;
 }
 

trunk/drivers/ata/Kconfig

@@ -381,7 +381,7 @@ config PATA_OPTI
 	  If unsure, say N.
 
 config PATA_OPTIDMA
-	tristate "OPTI FireStar PATA support (Veyr Experimental)"
+	tristate "OPTI FireStar PATA support (Very Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables DMA/PIO support for the later OPTi

trunk/drivers/ata/pata_hpt37x.c

@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.5.1"
+#define DRV_VERSION	"0.5.2"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -416,7 +416,7 @@ static const char *bad_ata100_5[] = {
 
 static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
 {
-	if (adev->class != ATA_DEV_ATA) {
+	if (adev->class == ATA_DEV_ATA) {
 		if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
 			mask &= ~ATA_MASK_UDMA;
 		if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
@@ -749,7 +749,7 @@ static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	int mscreg = 0x50 + 2 * ap->port_no;
+	int mscreg = 0x50 + 4 * ap->port_no;
 	u8 bwsr_stat, msc_stat;
 
 	pci_read_config_byte(pdev, 0x6A, &bwsr_stat);

trunk/drivers/block/pktcdvd.c

@@ -765,47 +765,34 @@ static inline struct bio *pkt_get_list_first(struct bio **list_head, struct bio
  */
 static int pkt_generic_packet(struct pktcdvd_device *pd, struct packet_command *cgc)
 {
-	char sense[SCSI_SENSE_BUFFERSIZE];
-	request_queue_t *q;
+	request_queue_t *q = bdev_get_queue(pd->bdev);
 	struct request *rq;
-	DECLARE_COMPLETION_ONSTACK(wait);
-	int err = 0;
+	int ret = 0;
 
-	q = bdev_get_queue(pd->bdev);
+	rq = blk_get_request(q, (cgc->data_direction == CGC_DATA_WRITE) ?
+			     WRITE : READ, __GFP_WAIT);
+
+	if (cgc->buflen) {
+		if (blk_rq_map_kern(q, rq, cgc->buffer, cgc->buflen, __GFP_WAIT))
+			goto out;
+	}
+
+	rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
+	memcpy(rq->cmd, cgc->cmd, CDROM_PACKET_SIZE);
+	if (sizeof(rq->cmd) > CDROM_PACKET_SIZE)
+		memset(rq->cmd + CDROM_PACKET_SIZE, 0, sizeof(rq->cmd) - CDROM_PACKET_SIZE);
 
-	rq = blk_get_request(q, (cgc->data_direction == CGC_DATA_WRITE) ? WRITE : READ,
-			     __GFP_WAIT);
-	rq->errors = 0;
-	rq->rq_disk = pd->bdev->bd_disk;
-	rq->bio = NULL;
-	rq->buffer = NULL;
 	rq->timeout = 60*HZ;
-	rq->data = cgc->buffer;
-	rq->data_len = cgc->buflen;
-	rq->sense = sense;
-	memset(sense, 0, sizeof(sense));
-	rq->sense_len = 0;
 	rq->cmd_type = REQ_TYPE_BLOCK_PC;
 	rq->cmd_flags |= REQ_HARDBARRIER;
 	if (cgc->quiet)
 		rq->cmd_flags |= REQ_QUIET;
-	memcpy(rq->cmd, cgc->cmd, CDROM_PACKET_SIZE);
-	if (sizeof(rq->cmd) > CDROM_PACKET_SIZE)
-		memset(rq->cmd + CDROM_PACKET_SIZE, 0, sizeof(rq->cmd) - CDROM_PACKET_SIZE);
-	rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
-
-	rq->ref_count++;
-	rq->end_io_data = &wait;
-	rq->end_io = blk_end_sync_rq;
-	elv_add_request(q, rq, ELEVATOR_INSERT_BACK, 1);
-	generic_unplug_device(q);
-	wait_for_completion(&wait);
-
-	if (rq->errors)
-		err = -EIO;
 
+	blk_execute_rq(rq->q, pd->bdev->bd_disk, rq, 0);
+	ret = rq->errors;
+out:
 	blk_put_request(rq);
-	return err;
+	return ret;
 }
 
 /*

trunk/drivers/char/ip2/i2ellis.h

@@ -606,9 +606,9 @@ static int iiDownloadAll(i2eBordStrPtr, loadHdrStrPtr, int, int);
 // code and returning.
 //
 #define COMPLETE(pB,code) \
-	if(1){ \
+	do { \
 		 pB->i2eError = code; \
 		 return (code == I2EE_GOOD);\
-	}
+	} while (0)
 
 #endif   // I2ELLIS_H

trunk/drivers/connector/cn_proc.c

@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/connector.h>
 #include <asm/atomic.h>
+#include <asm/unaligned.h>
 
 #include <linux/cn_proc.h>
 
@@ -60,7 +61,7 @@ void proc_fork_connector(struct task_struct *task)
 	ev = (struct proc_event*)msg->data;
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	ev->timestamp_ns = timespec_to_ns(&ts);
+	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
 	ev->what = PROC_EVENT_FORK;
 	ev->event_data.fork.parent_pid = task->real_parent->pid;
 	ev->event_data.fork.parent_tgid = task->real_parent->tgid;
@@ -88,7 +89,7 @@ void proc_exec_connector(struct task_struct *task)
 	ev = (struct proc_event*)msg->data;
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	ev->timestamp_ns = timespec_to_ns(&ts);
+	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
 	ev->what = PROC_EVENT_EXEC;
 	ev->event_data.exec.process_pid = task->pid;
 	ev->event_data.exec.process_tgid = task->tgid;
@@ -124,7 +125,7 @@ void proc_id_connector(struct task_struct *task, int which_id)
 	     	return;
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	ev->timestamp_ns = timespec_to_ns(&ts);
+	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
 
 	memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id));
 	msg->ack = 0; /* not used */
@@ -146,7 +147,7 @@ void proc_exit_connector(struct task_struct *task)
 	ev = (struct proc_event*)msg->data;
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	ev->timestamp_ns = timespec_to_ns(&ts);
+	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
 	ev->what = PROC_EVENT_EXIT;
 	ev->event_data.exit.process_pid = task->pid;
 	ev->event_data.exit.process_tgid = task->tgid;
@@ -181,7 +182,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack)
 	ev = (struct proc_event*)msg->data;
 	msg->seq = rcvd_seq;
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	ev->timestamp_ns = timespec_to_ns(&ts);
+	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
 	ev->cpu = -1;
 	ev->what = PROC_EVENT_NONE;
 	ev->event_data.ack.err = err;

trunk/drivers/i2c/busses/Kconfig

@@ -564,13 +564,4 @@ config I2C_PNX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pnx.
 
-config I2C_PNX_EARLY
-	bool "Early initialization for I2C on PNXxxxx"
-	depends on I2C_PNX=y
-	help
-	  Under certain circumstances one may need to make sure I2C on PNXxxxx
-	  is initialized earlier than some other driver that depends on it
-	  (for instance, that might be USB in case of PNX4008). With this
-	  option turned on you can guarantee that.
-
 endmenu

trunk/drivers/i2c/busses/i2c-mv64xxx.c

@@ -529,6 +529,8 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 	platform_set_drvdata(pd, drv_data);
 	i2c_set_adapdata(&drv_data->adapter, drv_data);
 
+	mv64xxx_i2c_hw_init(drv_data);
+
 	if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
 			MV64XXX_I2C_CTLR_NAME, drv_data)) {
 		dev_err(&drv_data->adapter.dev,
@@ -542,8 +544,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		goto exit_free_irq;
 	}
 
-	mv64xxx_i2c_hw_init(drv_data);
-
 	return 0;
 
 	exit_free_irq:

trunk/drivers/i2c/busses/i2c-pnx.c

@@ -305,8 +305,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
 	return 0;
 }
 
-static irqreturn_t
-i2c_pnx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 {
 	u32 stat, ctl;
 	struct i2c_adapter *adap = dev_id;
@@ -699,10 +698,6 @@ MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>");
 MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_I2C_PNX_EARLY
 /* We need to make sure I2C is initialized before USB */
 subsys_initcall(i2c_adap_pnx_init);
-#else
-mudule_init(i2c_adap_pnx_init);
-#endif
 module_exit(i2c_adap_pnx_exit);

trunk/drivers/i2c/chips/m41t00.c

@@ -209,6 +209,7 @@ m41t00_set(void *arg)
 	buf[m41t00_chip->hour] = (buf[m41t00_chip->hour] & ~0x3f) | (hour& 0x3f);
 	buf[m41t00_chip->day] = (buf[m41t00_chip->day] & ~0x3f) | (day & 0x3f);
 	buf[m41t00_chip->mon] = (buf[m41t00_chip->mon] & ~0x1f) | (mon & 0x1f);
+	buf[m41t00_chip->year] = year;
 
 	if (i2c_master_send(save_client, wbuf, 9) < 0)
 		dev_err(&save_client->dev, "m41t00_set: Write error\n");