---

yaml
---
r: 115203
b: refs/heads/master
c: 978b011
h: refs/heads/master
i:
  115201: 4b77897
  115199: 2949486
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3b7ecb5d2ffde82efd1b1bcc6780dc8a019acf02
+refs/heads/master: 978b0116cd225682a29e3d1d5010319bf2de32c2

trunk/.mailmap

@@ -96,6 +96,4 @@ Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
-Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
-Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>

trunk/Documentation/cpusets.txt

@@ -635,16 +635,14 @@ prior 'mems' setting, will not be moved.
 
 There is an exception to the above.  If hotplug functionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
-then all the tasks in that cpuset will be moved to the nearest ancestor
-with non-empty cpus.  But the moving of some (or all) tasks might fail if
-cpuset is bound with another cgroup subsystem which has some restrictions
-on task attaching.  In this failing case, those tasks will stay
-in the original cpuset, and the kernel will automatically update
-their cpus_allowed to allow all online CPUs.  When memory hotplug
-functionality for removing Memory Nodes is available, a similar exception
-is expected to apply there as well.  In general, the kernel prefers to
-violate cpuset placement, over starving a task that has had all
-its allowed CPUs or Memory Nodes taken offline.
+then the kernel will automatically update the cpus_allowed of all
+tasks attached to CPUs in that cpuset to allow all CPUs.  When memory
+hotplug functionality for removing Memory Nodes is available, a
+similar exception is expected to apply there as well.  In general,
+the kernel prefers to violate cpuset placement, over starving a task
+that has had all its allowed CPUs or Memory Nodes taken offline.  User
+code should reconfigure cpusets to only refer to online CPUs and Memory
+Nodes when using hotplug to add or remove such resources.
 
 There is a second exception to the above.  GFP_ATOMIC requests are
 kernel internal allocations that must be satisfied, immediately.

trunk/Documentation/feature-removal-schedule.txt

@@ -322,11 +322,3 @@ Why:  Accounting can now be enabled/disabled without kernel recompilation.
       controlled by a kernel/module/sysfs/sysctl parameter.
 Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
 
----------------------------
-
-What: ide-scsi (BLK_DEV_IDESCSI)
-When: 2.6.29
-Why:  The 2.6 kernel supports direct writing to ide CD drives, which
-      eliminates the need for ide-scsi. The new method is more
-      efficient in every way.
-Who:  FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

trunk/Documentation/filesystems/Locking

@@ -144,8 +144,8 @@ prototypes:
 	void (*kill_sb) (struct super_block *);
 locking rules:
 		may block	BKL
-get_sb		yes		no
-kill_sb		yes		no
+get_sb		yes		yes
+kill_sb		yes		yes
 
 ->get_sb() returns error or 0 with locked superblock attached to the vfsmount
 (exclusive on ->s_umount).
@@ -409,12 +409,12 @@ ioctl:			yes	(see below)
 unlocked_ioctl:		no	(see below)
 compat_ioctl:		no
 mmap:			no
-open:			no
+open:			maybe	(see below)
 flush:			no
 release:		no
 fsync:			no	(see below)
 aio_fsync:		no
-fasync:			no
+fasync:			yes	(see below)
 lock:			yes
 readv:			no
 writev:			no
@@ -431,6 +431,13 @@ For many filesystems, it is probably safe to acquire the inode
 semaphore.  Note some filesystems (i.e. remote ones) provide no
 protection for i_size so you will need to use the BKL.
 
+->open() locking is in-transit: big lock partially moved into the methods.
+The only exception is ->open() in the instances of file_operations that never
+end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices
+(chrdev_open() takes lock before replacing ->f_op and calling the secondary
+method. As soon as we fix the handling of module reference counters all
+instances of ->open() will be called without the BKL.
+
 Note: ext2_release() was *the* source of contention on fs-intensive
 loads and dropping BKL on ->release() helps to get rid of that (we still
 grab BKL for cases when we close a file that had been opened r/w, but that

trunk/Documentation/filesystems/proc.txt

@@ -2413,8 +2413,6 @@ The following 4 memory types are supported:
   - (bit 1) anonymous shared memory
   - (bit 2) file-backed private memory
   - (bit 3) file-backed shared memory
-  - (bit 4) ELF header pages in file-backed private memory areas (it is
-            effective only if the bit 2 is cleared)
 
   Note that MMIO pages such as frame buffer are never dumped and vDSO pages
   are always dumped regardless of the bitmask status.

trunk/Documentation/sysctl/kernel.txt

@@ -351,10 +351,9 @@ kernel.  This value defaults to SHMMAX.
 
 softlockup_thresh:
 
-This value can be used to lower the softlockup tolerance threshold.  The
-default threshold is 60 seconds.  If a cpu is locked up for 60 seconds,
-the kernel complains.  Valid values are 1-60 seconds.  Setting this
-tunable to zero will disable the softlockup detection altogether.
+This value can be used to lower the softlockup tolerance
+threshold. The default threshold is 10s.  If a cpu is locked up
+for 10s, the kernel complains.  Valid values are 1-60s.
 
 ==============================================================
 

trunk/MAINTAINERS

@@ -750,13 +750,11 @@ P:	Ville Syrjala
 M:	syrjala@sci.fi
 S:	Maintained
 
-ATLX ETHERNET DRIVERS
+ATL1 ETHERNET DRIVER
 P:	Jay Cliburn
 M:	jcliburn@gmail.com
 P:	Chris Snook
 M:	csnook@redhat.com
-P:	Jie Yang
-M:	jie.yang@atheros.com
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1595,7 +1593,7 @@ S:	Supported
 EMBEDDED LINUX
 P:	Paul Gortmaker
 M:	paul.gortmaker@windriver.com
-P:	David Woodhouse
+P	David Woodhouse
 M:	dwmw2@infradead.org
 L:	linux-embedded@vger.kernel.org
 S:	Maintained
@@ -4365,7 +4363,7 @@ S:	Maintained
 USB VIDEO CLASS
 P:	Laurent Pinchart
 M:	laurent.pinchart@skynet.be
-L:	linux-uvc-devel@lists.berlios.de
+L:	linx-uvc-devel@berlios.de
 L:	video4linux-list@redhat.com
 W:	http://linux-uvc.berlios.de
 S:	Maintained

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc5
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*

trunk/arch/arm/include/asm/io.h

@@ -61,9 +61,8 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 #define MT_DEVICE_NONSHARED	1
 #define MT_DEVICE_CACHED	2
 #define MT_DEVICE_IXP2000	3
-#define MT_DEVICE_WC		4
 /*
- * types 5 onwards can be found in asm/mach/map.h and are undefined
+ * types 4 onwards can be found in asm/mach/map.h and are undefined
  * for ioremap
  */
 
@@ -216,13 +215,11 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
 #define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
 #define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
-#define ioremap_wc(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE_WC)
 #define iounmap(cookie)			__iounmap(cookie)
 #else
 #define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
-#define ioremap_wc(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE_WC)
 #define iounmap(cookie)			__arch_iounmap(cookie)
 #endif
 

trunk/arch/arm/include/asm/mach/map.h

@@ -18,13 +18,13 @@ struct map_desc {
 	unsigned int type;
 };
 
-/* types 0-4 are defined in asm/io.h */
-#define MT_CACHECLEAN		5
-#define MT_MINICLEAN		6
-#define MT_LOW_VECTORS		7
-#define MT_HIGH_VECTORS		8
-#define MT_MEMORY		9
-#define MT_ROM			10
+/* types 0-3 are defined in asm/io.h */
+#define MT_CACHECLEAN		4
+#define MT_MINICLEAN		5
+#define MT_LOW_VECTORS		6
+#define MT_HIGH_VECTORS		7
+#define MT_MEMORY		8
+#define MT_ROM			9
 
 #define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
 #define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000

trunk/arch/arm/include/asm/pci.h

@@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  * The networking and block device layers use this boolean for bounce
  * buffer decisions.
  */
-#define PCI_DMA_BUS_IS_PHYS     (1)
+#define PCI_DMA_BUS_IS_PHYS     (0)
 
 /*
  * Whether pci_unmap_{single,page} is a nop depends upon the

trunk/arch/arm/mach-mx3/pcm037.c

@@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = {
 };
 
 static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
+	.flags = 0,
 };
 
 static struct platform_device *devices[] __initdata = {

trunk/arch/arm/mach-omap1/mcbsp.c

@@ -159,7 +159,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP730
 static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP730_MCBSP1_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -168,7 +167,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP730_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -186,7 +184,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP1510_MCBSP1_BASE,
 		.virt_base	= OMAP1510_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -196,7 +193,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 		},
 	{
-		.phys_base	= OMAP1510_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1510_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -205,7 +201,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP1510_MCBSP3_BASE,
 		.virt_base	= OMAP1510_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -224,7 +219,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP1610_MCBSP1_BASE,
 		.virt_base	= OMAP1610_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -234,7 +228,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
-		.phys_base	= OMAP1610_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1610_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -243,7 +236,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP1610_MCBSP3_BASE,
 		.virt_base	= OMAP1610_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,

trunk/arch/arm/mach-omap2/mcbsp.c

@@ -134,7 +134,6 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP24XX
 static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP24XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -144,7 +143,6 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
-		.phys_base	= OMAP24XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
@@ -163,7 +161,6 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP34XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -173,7 +170,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
-		.phys_base	= OMAP34XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,

trunk/arch/arm/mach-pxa/tosa.c

@@ -50,7 +50,6 @@
 #include <asm/mach/sharpsl_param.h>
 
 #include "generic.h"
-#include "clock.h"
 #include "devices.h"
 
 static unsigned long tosa_pin_config[] = {
@@ -522,14 +521,6 @@ static struct gpio_keys_button tosa_gpio_keys[] = {
 		.wakeup	= 1,
 		.active_low = 1,
 	},
-	{
-		.type	= EV_SW,
-		.code	= SW_HEADPHONE_INSERT,
-		.gpio	= TOSA_GPIO_EAR_IN,
-		.desc	= "HeadPhone insert",
-		.active_low = 1,
-		.debounce_interval = 300,
-	},
 };
 
 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
@@ -801,8 +792,6 @@ static void __init tosa_init(void)
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
-	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
-
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }