microblaze: Do not use "la" pseudo instruction - use addik instead

"la" pseudo instruction is only translation to "addik".
Use directly "addik" which is described in the MB reference guide.

Signed-off-by: Michal Simek <monstr@monstr.eu>

arch/microblaze/kernel/entry-nommu.S

@@ -115,7 +115,7 @@ ENTRY(_interrupt)
 	/* restore r31 */
 	lwi	r31, r0, PER_CPU(CURRENT_SAVE)
 	/* prepare the link register, the argument and jump */
-	la	r15, r0, ret_from_intr - 8
+	addik	r15, r0, ret_from_intr - 8
 	addk	r6, r0, r15
 	braid	do_IRQ
 	add	r5, r0, r1
@@ -283,7 +283,7 @@ ENTRY(_user_exception)
 	add	r12, r12, r12			/* convert num -> ptr */
 	add	r12, r12, r12
 	lwi	r12, r12, sys_call_table	/* Get function pointer */
-	la	r15, r0, ret_to_user-8		/* set return address */
+	addik	r15, r0, ret_to_user-8		/* set return address */
 	bra	r12				/* Make the system call. */
 	bri	0				/* won't reach here */
 1:

arch/microblaze/kernel/entry.S

@@ -821,7 +821,7 @@ C_ENTRY(_debug_exception):
 	tovirt(r1,r1)
 #ifdef CONFIG_KGDB
 	addi	r5, r1, 0 /* pass pt_reg address as the first arg */
-	la	r15, r0, dbtrap_call; /* return address */
+	addik	r15, r0, dbtrap_call; /* return address */
 	rtbd	r0, microblaze_kgdb_break
 	nop;
 #endif

arch/microblaze/kernel/head.S

@@ -224,26 +224,26 @@ start_here:
 #endif /* CONFIG_MMU */
 
 	/* Initialize small data anchors */
-	la	r13, r0, _KERNEL_SDA_BASE_
-	la	r2, r0, _KERNEL_SDA2_BASE_
+	addik	r13, r0, _KERNEL_SDA_BASE_
+	addik	r2, r0, _KERNEL_SDA2_BASE_
 
 	/* Initialize stack pointer */
-	la	r1, r0, init_thread_union + THREAD_SIZE - 4
+	addik	r1, r0, init_thread_union + THREAD_SIZE - 4
 
 	/* Initialize r31 with current task address */
-	la	r31, r0, init_task
+	addik	r31, r0, init_task
 
 	/*
 	 * Call platform dependent initialize function.
 	 * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for
 	 * the function.
 	 */
-	la	r9, r0, machine_early_init
+	addik	r9, r0, machine_early_init
 	brald	r15, r9
 	nop
 
 #ifndef CONFIG_MMU
-	la	r15, r0, machine_halt
+	addik	r15, r0, machine_halt
 	braid	start_kernel
 	nop
 #else

arch/microblaze/kernel/hw_exception_handler.S

@@ -490,7 +490,7 @@ ex_lw_tail:
 	/* Get the destination register number into r5 */
 	lbui	r5, r0, TOPHYS(ex_reg_op);
 	/* Form load_word jump table offset (lw_table + (8 * regnum)) */
-	la	r6, r0, TOPHYS(lw_table);
+	addik	r6, r0, TOPHYS(lw_table);
 	addk	r5, r5, r5;
 	addk	r5, r5, r5;
 	addk	r5, r5, r5;
@@ -501,7 +501,7 @@ ex_sw:
 	/* Get the destination register number into r5 */
 	lbui	r5, r0, TOPHYS(ex_reg_op);
 	/* Form store_word jump table offset (sw_table + (8 * regnum)) */
-	la	r6, r0, TOPHYS(sw_table);
+	addik	r6, r0, TOPHYS(sw_table);
 	add	r5, r5, r5;
 	add	r5, r5, r5;
 	add	r5, r5, r5;
@@ -912,7 +912,7 @@ ex_lw_vm:
 	beqid	r6, ex_lhw_vm;
 load1:	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
 /* Load a word, byte-by-byte from destination address and save it in tmp space*/
-	la	r6, r0, ex_tmp_data_loc_0;
+	addik	r6, r0, ex_tmp_data_loc_0;
 	sbi	r5, r6, 0;
 load2:	lbui	r5, r4, 1;
 	sbi	r5, r6, 1;
@@ -926,7 +926,7 @@ load4:	lbui	r5, r4, 3;
 ex_lhw_vm:
 	/* Load a half-word, byte-by-byte from destination address and
 	 * save it in tmp space */
-	la	r6, r0, ex_tmp_data_loc_0;
+	addik	r6, r0, ex_tmp_data_loc_0;
 	sbi	r5, r6, 0;
 load5:	lbui	r5, r4, 1;
 	sbi	r5, r6, 1;
@@ -942,7 +942,7 @@ ex_sw_vm:
 	addik	r5, r8, sw_table_vm;
 	bra	r5;
 ex_sw_tail_vm:
-	la	r5, r0, ex_tmp_data_loc_0;
+	addik	r5, r0, ex_tmp_data_loc_0;
 	beqid	r6, ex_shw_vm;
 	swi	r3, r5, 0;	/* Get the word - delay slot */
 	/* Store the word, byte-by-byte into destination address */
@@ -985,7 +985,7 @@ ex_unaligned_fixup:
 	addik	r7, r0, SIGSEGV
 	/* call bad_page_fault for finding aligned fixup, fixup address is saved
 	 * in PT_PC which is used as return address from exception */
-	la	r15, r0, ret_from_exc-8 /* setup return address */
+	addik	r15, r0, ret_from_exc-8 /* setup return address */
 	brid	bad_page_fault
 	nop