Merge branch 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/ker…

…nel/avr32

* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
  [AVR32] Add missing #include <linux/param.h> to delay.c
  [AVR32] Pass dev parameter to dma_cache_sync()
  [AVR32] Implement intc_get_pending()
  [AVR32] Don't include <asm/delay.h>
  [AVR32] Put the chip in "stop" mode when halting the system
  [AVR32] Set flow handler for external interrupts
  [AVR32] Remove unused file
  [AVR32] Remove mii_phy_addr and eth_addr from eth_platform_data
  [AVR32] Move ethernet tag parsing to board-specific code
  [AVR32] Add macb1 platform_device
  [AVR32] Portmux API update

arch/avr32/boards/atstk1000/atstk1002.c

@@ -7,20 +7,83 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/types.h>
 
+#include <asm/io.h>
+#include <asm/setup.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
 
-struct eth_platform_data __initdata eth0_data = {
-	.valid		= 1,
-	.mii_phy_addr	= 0x10,
-	.is_rmii	= 0,
-	.hw_addr	= { 0x6a, 0x87, 0x71, 0x14, 0xcd, 0xcb },
+struct eth_addr {
+	u8 addr[6];
 };
 
+static struct eth_addr __initdata hw_addr[2];
+
+static struct eth_platform_data __initdata eth_data[2];
 extern struct lcdc_platform_data atstk1000_fb0_data;
 
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+	int i;
+
+	i = tag->u.ethernet.mac_index;
+	if (i < ARRAY_SIZE(hw_addr))
+		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+		       sizeof(hw_addr[i].addr));
+
+	return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	const u8 *addr;
+	void __iomem *regs;
+	struct clk *pclk;
+
+	if (!res)
+		return;
+	if (pdev->id >= ARRAY_SIZE(hw_addr))
+		return;
+
+	addr = hw_addr[pdev->id].addr;
+	if (!is_valid_ether_addr(addr))
+		return;
+
+	/*
+	 * Since this is board-specific code, we'll cheat and use the
+	 * physical address directly as we happen to know that it's
+	 * the same as the virtual address.
+	 */
+	regs = (void __iomem __force *)res->start;
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (!pclk)
+		return;
+
+	clk_enable(pclk);
+	__raw_writel((addr[3] << 24) | (addr[2] << 16)
+		     | (addr[1] << 8) | addr[0], regs + 0x98);
+	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+	clk_disable(pclk);
+	clk_put(pclk);
+}
+
 void __init setup_board(void)
 {
 	at32_map_usart(1, 0);	/* /dev/ttyS0 */
@@ -38,7 +101,8 @@ static int __init atstk1002_init(void)
 	at32_add_device_usart(1);
 	at32_add_device_usart(2);
 
-	at32_add_device_eth(0, &eth0_data);
+	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+
 	at32_add_device_spi(0);
 	at32_add_device_lcdc(0, &atstk1000_fb0_data);
 

arch/avr32/kernel/avr32_ksyms.c

@@ -7,12 +7,12 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/module.h>
 
 #include <asm/checksum.h>
 #include <asm/uaccess.h>
-#include <asm/delay.h>
 
 /*
  * GCC functions

arch/avr32/kernel/process.c

@@ -38,6 +38,13 @@ void cpu_idle(void)
 
 void machine_halt(void)
 {
+	/*
+	 * Enter Stop mode. The 32 kHz oscillator will keep running so
+	 * the RTC will keep the time properly and the system will
+	 * boot quickly.
+	 */
+	asm volatile("sleep 3\n\t"
+		     "sub pc, -2");
 }
 
 void machine_power_off(void)

arch/avr32/kernel/setup.c

@@ -229,30 +229,6 @@ static int __init parse_tag_rsvd_mem(struct tag *tag)
 }
 __tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
 
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-#if 0
-	const struct platform_device *pdev;
-
-	/*
-	 * We really need a bus type that supports "classes"...this
-	 * will do for now (until we must handle other kinds of
-	 * ethernet controllers)
-	 */
-	pdev = platform_get_device("macb", tag->u.ethernet.mac_index);
-	if (pdev && pdev->dev.platform_data) {
-		struct eth_platform_data *data = pdev->dev.platform_data;
-
-		data->valid = 1;
-		data->mii_phy_addr = tag->u.ethernet.mii_phy_addr;
-		memcpy(data->hw_addr, tag->u.ethernet.hw_address,
-		       sizeof(data->hw_addr));
-	}
-#endif
-	return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
 /*
  * Scan the tag table for this tag, and call its parse function. The
  * tag table is built by the linker from all the __tagtable

arch/avr32/lib/delay.c

@@ -12,9 +12,9 @@
 
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/param.h>
 #include <linux/types.h>
 
-#include <asm/delay.h>
 #include <asm/processor.h>
 #include <asm/sysreg.h>