---

yaml
---
r: 321567
b: refs/heads/master
c: b9ad2ba
h: refs/heads/master
i:
  321565: d2d3797
  321563: 61de0ea
  321559: c546215
  321551: 19cd5aa
  321535: 695fbec
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 119b0e0351bcdb7833f368781e6241ff283b49e5
+refs/heads/master: b9ad2baf91426787bf52dc06f53b0e81553d1c7d

trunk/Documentation/DocBook/filesystems.tmpl

@@ -224,8 +224,8 @@ all your transactions.
 </para>
 
 <para>
-Then at umount time , in your put_super() (2.4) or write_super() (2.5)
-you can then call journal_destroy() to clean up your in-core journal object.
+Then at umount time , in your put_super() you can then call journal_destroy()
+to clean up your in-core journal object.
 </para>
 
 <para>

trunk/Documentation/devicetree/bindings/arm/mrvl/intc.txt

@@ -38,3 +38,23 @@ Example:
 		reg-names = "mux status", "mux mask";
 		mrvl,intc-nr-irqs = <2>;
 	};
+
+* Marvell Orion Interrupt controller
+
+Required properties
+- compatible :  Should be "marvell,orion-intc".
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. Supported value is <1>.
+- interrupt-controller : Declare this node to be an interrupt controller.
+- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
+        One entry in the list represents 32 interrupts.
+
+Example:
+
+	intc: interrupt-controller {
+        	compatible = "marvell,orion-intc", "marvell,intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+                reg = <0xfed20204 0x04>,
+		      <0xfed20214 0x04>;
+        };

trunk/Documentation/devicetree/bindings/ata/marvell.txt

@@ -0,0 +1,16 @@
+* Marvell Orion SATA
+
+Required Properties:
+- compatibility : "marvell,orion-sata"
+- reg           : Address range of controller
+- interrupts    : Interrupt controller is using
+- nr-ports      : Number of SATA ports in use.
+
+Example:
+
+	sata@80000 {
+		compatible = "marvell,orion-sata";
+		reg = <0x80000 0x5000>;
+		interrupts = <21>;
+		nr-ports = <2>;
+	}

trunk/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt

@@ -27,3 +27,26 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
       };
+
+* Marvell Orion GPIO Controller
+
+Required properties:
+- compatible         : Should be "marvell,orion-gpio"
+- reg                : Address and length of the register set for controller.
+- gpio-controller    : So we know this is a gpio controller.
+- ngpio              : How many gpios this controller has.
+- interrupts	     : Up to 4 Interrupts for the controller.
+
+Optional properties:
+- mask-offset        : For SMP Orions, offset for Nth CPU
+
+Example:
+
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpio = <32>;
+			interrupts = <35>, <36>, <37>, <38>;
+		};

trunk/Documentation/devicetree/bindings/watchdog/marvel.txt

@@ -0,0 +1,14 @@
+* Marvell Orion Watchdog Time
+
+Required Properties:
+
+- Compatibility : "marvell,orion-wdt"
+- reg		: Address of the timer registers
+
+Example:
+
+	wdt@20300 {
+		compatible = "marvell,orion-wdt";
+		reg = <0x20300 0x28>;
+		status = "okay";
+	};

trunk/Documentation/filesystems/Locking

@@ -114,7 +114,6 @@ prototypes:
 	int (*drop_inode) (struct inode *);
 	void (*evict_inode) (struct inode *);
 	void (*put_super) (struct super_block *);
-	void (*write_super) (struct super_block *);
 	int (*sync_fs)(struct super_block *sb, int wait);
 	int (*freeze_fs) (struct super_block *);
 	int (*unfreeze_fs) (struct super_block *);
@@ -136,7 +135,6 @@ write_inode:
 drop_inode:				!!!inode->i_lock!!!
 evict_inode:
 put_super:		write
-write_super:		read
 sync_fs:		read
 freeze_fs:		write
 unfreeze_fs:		write

trunk/Documentation/filesystems/porting

@@ -94,9 +94,8 @@ protected.
 ---
 [mandatory]
 
-BKL is also moved from around sb operations.  ->write_super() Is now called 
-without BKL held.  BKL should have been shifted into individual fs sb_op
-functions.  If you don't need it, remove it.  
+BKL is also moved from around sb operations. BKL should have been shifted into
+individual fs sb_op functions.  If you don't need it, remove it.
 
 ---
 [informational]

trunk/Documentation/filesystems/vfs.txt

@@ -216,7 +216,6 @@ struct super_operations {
         void (*drop_inode) (struct inode *);
         void (*delete_inode) (struct inode *);
         void (*put_super) (struct super_block *);
-        void (*write_super) (struct super_block *);
         int (*sync_fs)(struct super_block *sb, int wait);
         int (*freeze_fs) (struct super_block *);
         int (*unfreeze_fs) (struct super_block *);
@@ -273,9 +272,6 @@ or bottom half).
   put_super: called when the VFS wishes to free the superblock
 	(i.e. unmount). This is called with the superblock lock held
 
-  write_super: called when the VFS superblock needs to be written to
-	disc. This method is optional
-
   sync_fs: called when VFS is writing out all dirty data associated with
   	a superblock. The second parameter indicates whether the method
 	should wait until the write out has been completed. Optional.

trunk/Documentation/laptops/laptop-mode.txt

@@ -262,9 +262,9 @@ MINIMUM_BATTERY_MINUTES=10
 
 #
 # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
-# exceeded, the kernel will wake pdflush which will then reduce the amount
-# of dirty memory to dirty_background_ratio.  Set this nice and low, so once
-# some writeout has commenced, we do a lot of it.
+# exceeded, the kernel will wake flusher threads which will then reduce the
+# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
+# so once some writeout has commenced, we do a lot of it.
 #
 #DIRTY_BACKGROUND_RATIO=5
 
@@ -384,9 +384,9 @@ CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
 
 #
 # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
-# exceeded, the kernel will wake pdflush which will then reduce the amount
-# of dirty memory to dirty_background_ratio.  Set this nice and low, so once
-# some writeout has commenced, we do a lot of it.
+# exceeded, the kernel will wake flusher threads which will then reduce the
+# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
+# so once some writeout has commenced, we do a lot of it.
 #
 DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'}
 

trunk/Documentation/sysctl/vm.txt

@@ -76,8 +76,8 @@ huge pages although processes will also directly compact memory as required.
 
 dirty_background_bytes
 
-Contains the amount of dirty memory at which the pdflush background writeback
-daemon will start writeback.
+Contains the amount of dirty memory at which the background kernel
+flusher threads will start writeback.
 
 Note: dirty_background_bytes is the counterpart of dirty_background_ratio. Only
 one of them may be specified at a time. When one sysctl is written it is
@@ -89,7 +89,7 @@ other appears as 0 when read.
 dirty_background_ratio
 
 Contains, as a percentage of total system memory, the number of pages at which
-the pdflush background writeback daemon will start writing out dirty data.
+the background kernel flusher threads will start writing out dirty data.
 
 ==============================================================
 
@@ -112,9 +112,9 @@ retained.
 dirty_expire_centisecs
 
 This tunable is used to define when dirty data is old enough to be eligible
-for writeout by the pdflush daemons.  It is expressed in 100'ths of a second.
-Data which has been dirty in-memory for longer than this interval will be
-written out next time a pdflush daemon wakes up.
+for writeout by the kernel flusher threads.  It is expressed in 100'ths
+of a second.  Data which has been dirty in-memory for longer than this
+interval will be written out next time a flusher thread wakes up.
 
 ==============================================================
 
@@ -128,7 +128,7 @@ data.
 
 dirty_writeback_centisecs
 
-The pdflush writeback daemons will periodically wake up and write `old' data
+The kernel flusher threads will periodically wake up and write `old' data
 out to disk.  This tunable expresses the interval between those wakeups, in
 100'ths of a second.
 

trunk/MAINTAINERS

@@ -5329,14 +5329,15 @@ PIN CONTROL SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
 F:	drivers/pinctrl/
+F:	include/linux/pinctrl/
 
 PIN CONTROLLER - ST SPEAR
-M:     Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <viresh.linux@gmail.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
-F:	driver/pinctrl/spear/
+F:	drivers/pinctrl/spear/
 
 PKTCDVD DRIVER
 M:	Peter Osterlund <petero2@telia.com>

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
-PATCHLEVEL = 5
+PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc1
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -1151,6 +1151,7 @@ config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
 	select COMMON_CLK
 
 config PLAT_PXA

trunk/arch/arm/boot/dts/armada-xp.dtsi

@@ -12,7 +12,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  *
- * Contains definitions specific to the Armada 370 SoC that are not
+ * Contains definitions specific to the Armada XP SoC that are not
  * common to all Armada SoCs.
  */
 

trunk/arch/arm/boot/dts/kirkwood-dns320.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
+/include/ "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-320 NAS (Rev A1)";
@@ -15,6 +15,31 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	gpio-leds {
+		compatible = "gpio-leds";
+		blue-power {
+			label = "dns320:blue:power";
+			gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+			linux,default-trigger = "default-on";
+		};
+		blue-usb {
+			label = "dns320:blue:usb";
+			gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+		};
+		orange-l_hdd {
+			label = "dns320:orange:l_hdd";
+			gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
+		};
+		orange-r_hdd {
+			label = "dns320:orange:r_hdd";
+			gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+		};
+		orange-usb {
+			label = "dns320:orange:usb";
+			gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */
+		};
+	};
+
 	ocp@f1000000 {
 		serial@12000 {
 			clock-frequency = <166666667>;
@@ -25,40 +50,5 @@
 			clock-frequency = <166666667>;
 			status = "okay";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
-			};
-		};
 	};
 };