USB / PM: Drop CONFIG_PM_RUNTIME from the USB core

After commit b2b49cc (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
git-mirror · Dec 3, 2014 · ceb6c9c · ceb6c9c
1 parent 6ed23b8
commit ceb6c9c
Show file tree

Hide file tree

Showing 19 changed files with 69 additions and 112 deletions.
diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb
@@ -32,10 +32,9 @@ Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
 Description:
-		If CONFIG_PM_RUNTIME is enabled then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been connected to the machine.  This
-		file is read-only.
+		If CONFIG_PM is enabled, then this file is present.  When read,
+		it returns the total time (in msec) that the USB device has been
+		connected to the machine.  This file is read-only.
 Users:
 		PowerTOP <powertop@lists.01.org>
 		https://01.org/powertop/
@@ -45,10 +44,9 @@ Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
 Description:
-		If CONFIG_PM_RUNTIME is enabled then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been active, i.e. not in a suspended
-		state.  This file is read-only.
+		If CONFIG_PM is enabled, then this file is present.  When read,
+		it returns the total time (in msec) that the USB device has been
+		active, i.e. not in a suspended state.  This file is read-only.
 
 		Tools can use this file and the connected_duration file to
 		compute the percentage of time that a device has been active.

diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
@@ -104,16 +104,15 @@ What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
 Date:		September 2011
 Contact:	Andiry Xu <andiry.xu@amd.com>
 Description:
-		If CONFIG_PM_RUNTIME is set and a USB 2.0 lpm-capable device
-		is plugged in to a xHCI host which support link PM, it will
-		perform a LPM test; if the test is passed and host supports
-		USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will
-		be enabled for the device and the USB device directory will
-		contain a file named power/usb2_hardware_lpm.  The file holds
-		a string value (enable or disable) indicating whether or not
-		USB2 hardware LPM is enabled for the device. Developer can
-		write y/Y/1 or n/N/0 to the file to enable/disable the
-		feature.
+		If CONFIG_PM is set and a USB 2.0 lpm-capable device is plugged
+		in to a xHCI host which support link PM, it will perform a LPM
+		test; if the test is passed and host supports USB2 hardware LPM
+		(xHCI 1.0 feature), USB2 hardware LPM will be enabled for the
+		device and the USB device directory will contain a file named
+		power/usb2_hardware_lpm.  The file holds a string value (enable
+		or disable) indicating whether or not USB2 hardware LPM is
+		enabled for the device. Developer can write y/Y/1 or n/N/0 to
+		the file to enable/disable the feature.
 
 What:		/sys/bus/usb/devices/.../removable
 Date:		February 2012

diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
@@ -47,14 +47,15 @@ dynamic PM is implemented in the USB subsystem, although system PM is
 covered to some extent (see Documentation/power/*.txt for more
 information about system PM).
 
-Note: Dynamic PM support for USB is present only if the kernel was
-built with CONFIG_USB_SUSPEND enabled (which depends on
-CONFIG_PM_RUNTIME).  System PM support is present only if the kernel
-was built with CONFIG_SUSPEND or CONFIG_HIBERNATION enabled.
-
-(Starting with the 3.10 kernel release, dynamic PM support for USB is
-present whenever the kernel was built with CONFIG_PM_RUNTIME enabled.
-The CONFIG_USB_SUSPEND option has been eliminated.)
+System PM support is present only if the kernel was built with CONFIG_SUSPEND
+or CONFIG_HIBERNATION enabled.  Dynamic PM support for USB is present whenever
+the kernel was built with CONFIG_PM enabled.
+
+[Historically, dynamic PM support for USB was present only if the
+kernel had been built with CONFIG_USB_SUSPEND enabled (which depended on
+CONFIG_PM_RUNTIME).  Starting with the 3.10 kernel release, dynamic PM support
+for USB was present whenever the kernel was built with CONFIG_PM_RUNTIME
+enabled.  The CONFIG_USB_SUSPEND option had been eliminated.]
 
 
 	What is Remote Wakeup?

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
@@ -1493,10 +1493,6 @@ int usb_resume(struct device *dev, pm_message_t msg)
 	return status;
 }
 
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
-
 /**
  * usb_enable_autosuspend - allow a USB device to be autosuspended
  * @udev: the USB device which may be autosuspended
@@ -1876,7 +1872,7 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
 	return ret;
 }
 
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
 
 struct bus_type usb_bus_type = {
 	.name =		"usb",

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
@@ -429,7 +429,6 @@ static int check_root_hub_suspended(struct device *dev)
 	return 0;
 }
 
-#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
 static int suspend_common(struct device *dev, bool do_wakeup)
 {
 	struct pci_dev		*pci_dev = to_pci_dev(dev);
@@ -528,7 +527,6 @@ static int resume_common(struct device *dev, int event)
 	}
 	return retval;
 }
-#endif	/* SLEEP || RUNTIME */
 
 #ifdef	CONFIG_PM_SLEEP
 
@@ -607,8 +605,6 @@ static int hcd_pci_restore(struct device *dev)
 
 #endif	/* CONFIG_PM_SLEEP */
 
-#ifdef	CONFIG_PM_RUNTIME
-
 static int hcd_pci_runtime_suspend(struct device *dev)
 {
 	int	retval;
@@ -630,13 +626,6 @@ static int hcd_pci_runtime_resume(struct device *dev)
 	return retval;
 }
 
-#else
-
-#define hcd_pci_runtime_suspend	NULL
-#define hcd_pci_runtime_resume	NULL
-
-#endif	/* CONFIG_PM_RUNTIME */
-
 const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 	.suspend	= hcd_pci_suspend,
 	.suspend_noirq	= hcd_pci_suspend_noirq,

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
@@ -2258,10 +2258,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 	return status;
 }
 
-#endif	/* CONFIG_PM */
-
-#ifdef	CONFIG_PM_RUNTIME
-
 /* Workqueue routine for root-hub remote wakeup */
 static void hcd_resume_work(struct work_struct *work)
 {
@@ -2293,7 +2289,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
 }
 EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
 
-#endif	/* CONFIG_PM_RUNTIME */
+#endif	/* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
 
@@ -2476,7 +2472,7 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
 	init_timer(&hcd->rh_timer);
 	hcd->rh_timer.function = rh_timer_func;
 	hcd->rh_timer.data = (unsigned long) hcd;
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 	INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
 #endif
 
@@ -2790,7 +2786,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	hcd->rh_registered = 0;
 	spin_unlock_irq(&hcd_root_hub_lock);
 
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 	cancel_work_sync(&hcd->wakeup_work);
 #endif
 	mutex_lock(&usb_bus_list_lock);
@@ -2858,7 +2854,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	hcd->rh_registered = 0;
 	spin_unlock_irq (&hcd_root_hub_lock);
 
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 	cancel_work_sync(&hcd->wakeup_work);
 #endif
 

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
@@ -1737,7 +1737,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	 * - If user has indicated to prevent autosuspend by passing
 	 *   usbcore.autosuspend = -1 then keep autosuspend disabled.
 	 */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 	if (hdev->dev.power.autosuspend_delay >= 0)
 		pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
 #endif
@@ -3449,7 +3449,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	return status;
 }
 
-#ifdef	CONFIG_PM_RUNTIME
+#ifdef	CONFIG_PM
 
 int usb_remote_wakeup(struct usb_device *udev)
 {
@@ -4856,7 +4856,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 			udev->state != USB_STATE_NOTATTACHED) {
 		if (portstatus & USB_PORT_STAT_ENABLE) {
 			status = 0;		/* Nothing to do */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 		} else if (udev->state == USB_STATE_SUSPENDED &&
 				udev->persist_enabled) {
 			/* For a suspended device, treat this as a

diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
@@ -72,7 +72,7 @@ static void usb_port_device_release(struct device *dev)
 	kfree(port_dev);
 }
 
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 static int usb_port_runtime_resume(struct device *dev)
 {
 	struct usb_port *port_dev = to_usb_port(dev);
@@ -171,7 +171,7 @@ static int usb_port_runtime_suspend(struct device *dev)
 #endif
 
 static const struct dev_pm_ops usb_port_pm_ops = {
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 	.runtime_suspend =	usb_port_runtime_suspend,
 	.runtime_resume =	usb_port_runtime_resume,
 #endif

diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
@@ -334,14 +334,6 @@ static void remove_persist_attributes(struct device *dev)
 			&dev_attr_persist.attr,
 			power_group_name);
 }
-#else
-
-#define add_persist_attributes(dev)	0
-#define remove_persist_attributes(dev)	do {} while (0)
-
-#endif	/* CONFIG_PM */
-
-#ifdef	CONFIG_PM_RUNTIME
 
 static ssize_t connected_duration_show(struct device *dev,
 				       struct device_attribute *attr, char *buf)
@@ -585,10 +577,13 @@ static void remove_power_attributes(struct device *dev)
 
 #else
 
+#define add_persist_attributes(dev)	0
+#define remove_persist_attributes(dev)	do {} while (0)
+
 #define add_power_attributes(dev)	0
 #define remove_power_attributes(dev)	do {} while (0)
 
-#endif	/* CONFIG_PM_RUNTIME */
+#endif	/* CONFIG_PM */
 
 
 /* Descriptor fields */

diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
@@ -49,7 +49,7 @@ const char *usbcore_name = "usbcore";
 
 static bool nousb;	/* Disable USB when built into kernel image */
 
-#ifdef	CONFIG_PM_RUNTIME
+#ifdef	CONFIG_PM
 static int usb_autosuspend_delay = 2;		/* Default delay value,
 						 * in seconds */
 module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
@@ -348,11 +348,9 @@ static const struct dev_pm_ops usb_device_pm_ops = {
 	.thaw =		usb_dev_thaw,
 	.poweroff =	usb_dev_poweroff,
 	.restore =	usb_dev_restore,
-#ifdef CONFIG_PM_RUNTIME
 	.runtime_suspend =	usb_runtime_suspend,
 	.runtime_resume =	usb_runtime_resume,
 	.runtime_idle =		usb_runtime_idle,
-#endif
 };
 
 #endif	/* CONFIG_PM */

diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
@@ -75,6 +75,14 @@ extern int usb_resume_complete(struct device *dev);
 extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg);
 extern int usb_port_resume(struct usb_device *dev, pm_message_t msg);
 
+extern void usb_autosuspend_device(struct usb_device *udev);
+extern int usb_autoresume_device(struct usb_device *udev);
+extern int usb_remote_wakeup(struct usb_device *dev);
+extern int usb_runtime_suspend(struct device *dev);
+extern int usb_runtime_resume(struct device *dev);
+extern int usb_runtime_idle(struct device *dev);
+extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable);
+
 #else
 
 static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
@@ -87,20 +95,6 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	return 0;
 }
 
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
-
-extern void usb_autosuspend_device(struct usb_device *udev);
-extern int usb_autoresume_device(struct usb_device *udev);
-extern int usb_remote_wakeup(struct usb_device *dev);
-extern int usb_runtime_suspend(struct device *dev);
-extern int usb_runtime_resume(struct device *dev);
-extern int usb_runtime_idle(struct device *dev);
-extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable);
-
-#else
-
 #define usb_autosuspend_device(udev)		do {} while (0)
 static inline int usb_autoresume_device(struct usb_device *udev)
 {
@@ -111,6 +105,7 @@ static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
 {
 	return 0;
 }
+
 #endif
 
 extern struct bus_type usb_bus_type;

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
@@ -305,7 +305,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		}
 	}
 
-#ifdef	CONFIG_PM_RUNTIME
+#ifdef	CONFIG_PM
 	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
 		ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
 #endif

diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
@@ -22,7 +22,7 @@
  * and usb-storage.
  *
  * TODO:
- * - usb suspend/resume triggered by sl811 (with PM_RUNTIME)
+ * - usb suspend/resume triggered by sl811
  * - various issues noted in the code
  * - performance work; use both register banks; ...
  * - use urb->iso_frame_desc[] with ISO transfers
@@ -1752,8 +1752,7 @@ sl811h_probe(struct platform_device *dev)
 #ifdef	CONFIG_PM
 
 /* for this device there's no useful distinction between the controller
- * and its root hub, except that the root hub only gets direct PM calls
- * when CONFIG_PM_RUNTIME is enabled.
+ * and its root hub.
  */
 
 static int

diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
@@ -3144,8 +3144,7 @@ static int u132_probe(struct platform_device *pdev)
 #ifdef CONFIG_PM
 /*
  * for this device there's no useful distinction between the controller
- * and its root hub, except that the root hub only gets direct PM calls
- * when CONFIG_PM_RUNTIME is enabled.
+ * and its root hub.
  */
 static int u132_suspend(struct platform_device *pdev, pm_message_t state)
 {

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
@@ -1146,7 +1146,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 			set_bit(port_index, &bus_state->bus_suspended);
 		}
 		/* USB core sets remote wake mask for USB 3.0 hubs,
-		 * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME
+		 * including the USB 3.0 roothub, but only if CONFIG_PM
 		 * is enabled, so also enable remote wake here.
 		 */
 		if (hcd->self.root_hub->do_remote_wakeup