---

yaml
---
r: 87472
b: refs/heads/master
c: d5eee40
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: caeab084deb61cd2d51cb8facc0e894a5b406aa4
+refs/heads/master: d5eee405723eedbd621275e045ac9b36f668c39f

trunk/Documentation/input/notifier.txt

@@ -0,0 +1,52 @@
+Keyboard notifier
+
+One can use register_keyboard_notifier to get called back on keyboard
+events (see kbd_keycode() function for details).  The passed structure is
+keyboard_notifier_param:
+
+- 'vc' always provide the VC for which the keyboard event applies;
+- 'down' is 1 for a key press event, 0 for a key release;
+- 'shift' is the current modifier state, mask bit indexes are KG_*;
+- 'value' depends on the type of event.
+
+- KBD_KEYCODE events are always sent before other events, value is the keycode.
+- KBD_UNBOUND_KEYCODE events are sent if the keycode is not bound to a keysym.
+  value is the keycode.
+- KBD_UNICODE events are sent if the keycode -> keysym translation produced a
+  unicode character. value is the unicode value.
+- KBD_KEYSYM events are sent if the keycode -> keysym translation produced a
+  non-unicode character. value is the keysym.
+- KBD_POST_KEYSYM events are sent after the treatment of non-unicode keysyms.
+  That permits one to inspect the resulting LEDs for instance.
+
+For each kind of event but the last, the callback may return NOTIFY_STOP in
+order to "eat" the event: the notify loop is stopped and the keyboard event is
+dropped.
+
+In a rough C snippet, we have:
+
+kbd_keycode(keycode) {
+	...
+	params.value = keycode;
+	if (notifier_call_chain(KBD_KEYCODE,&params) == NOTIFY_STOP)
+	    || !bound) {
+		notifier_call_chain(KBD_UNBOUND_KEYCODE,&params);
+		return;
+	}
+
+	if (unicode) {
+		param.value = unicode;
+		if (notifier_call_chain(KBD_UNICODE,&params) == NOTIFY_STOP)
+			return;
+		emit unicode;
+		return;
+	}
+
+	params.value = keysym;
+	if (notifier_call_chain(KBD_KEYSYM,&params) == NOTIFY_STOP)
+		return;
+	apply keysym;
+	notifier_call_chain(KBD_POST_KEYSYM,&params);
+}
+
+NOTE: This notifier is usually called from interrupt context.

trunk/Documentation/kernel-parameters.txt

@@ -732,6 +732,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			     (Don't attempt to blink the leds)
 	i8042.noaux	[HW] Don't check for auxiliary (== mouse) port
 	i8042.nokbd	[HW] Don't check/create keyboard port
+	i8042.noloop	[HW] Disable the AUX Loopback command while probing
+			     for the AUX port
 	i8042.nomux	[HW] Don't check presence of an active multiplexing
 			     controller
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX

trunk/Documentation/mca.txt

@@ -143,14 +143,7 @@ MCA Device Drivers
 
 Currently, there are a number of MCA-specific device drivers.
 
-1) PS/2 ESDI
-	drivers/block/ps2esdi.c
-	include/linux/ps2esdi.h
-   Uses major number 36, and should use /dev files /dev/eda, /dev/edb.
-   Supports two drives, but only one controller.  May use the
-   command-line args "ed=cyl,head,sec" and "tp720".
-
-2) PS/2 SCSI
+1) PS/2 SCSI
 	drivers/scsi/ibmmca.c
 	drivers/scsi/ibmmca.h
    The driver for the IBM SCSI subsystem.  Includes both integrated
@@ -159,25 +152,25 @@ Currently, there are a number of MCA-specific device drivers.
    machine with a front-panel display (i.e. model 95), you can use
    "ibmmcascsi=display" to enable a drive activity indicator.
 
-3) 3c523
+2) 3c523
 	drivers/net/3c523.c
 	drivers/net/3c523.h
    3Com 3c523 Etherlink/MC ethernet driver.
 
-4) SMC Ultra/MCA and IBM Adapter/A
+3) SMC Ultra/MCA and IBM Adapter/A
 	drivers/net/smc-mca.c
 	drivers/net/smc-mca.h
 	Driver for the MCA version of the SMC Ultra and various other
 	OEM'ed and work-alike cards (Elite, Adapter/A, etc).
 
-5) NE/2
+4) NE/2
 	driver/net/ne2.c
 	driver/net/ne2.h
 	The NE/2 is the MCA version of the NE2000.  This may not work
 	with clones that have a different adapter id than the original
 	NE/2.
 
-6) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
+5) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
    Reply Sound Blaster/SCSI (SCSI part)
 	Better support for these cards than the driver for ISA.
    Supports multiple cards with IRQ sharing.

trunk/drivers/acpi/asus_acpi.c

@@ -610,7 +610,7 @@ write_led(const char __user * buffer, unsigned long count,
 	    (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask);
 
 	if (invert)		/* invert target value */
-		led_out = !led_out & 0x1;
+		led_out = !led_out;
 
 	if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
 		printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n",

trunk/drivers/acpi/battery.c

@@ -293,13 +293,12 @@ static int extract_package(struct acpi_battery *battery,
 				strncpy(ptr, (u8 *)&element->integer.value,
 					sizeof(acpi_integer));
 				ptr[sizeof(acpi_integer)] = 0;
-			} else return -EFAULT;
+			} else
+				*ptr = 0; /* don't have value */
 		} else {
-			if (element->type == ACPI_TYPE_INTEGER) {
-				int *x = (int *)((u8 *)battery +
-						offsets[i].offset);
-				*x = element->integer.value;
-			} else return -EFAULT;
+			int *x = (int *)((u8 *)battery + offsets[i].offset);
+			*x = (element->type == ACPI_TYPE_INTEGER) ?
+				element->integer.value : -1;
 		}
 	}
 	return 0;

trunk/drivers/acpi/dock.c

@@ -710,6 +710,7 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
 	if (!count)
 		return -EINVAL;
 
+	begin_undock(dock_station);
 	ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST);
 	return ret ? ret: count;
 }

trunk/drivers/acpi/processor_idle.c

@@ -216,8 +216,10 @@ static void acpi_safe_halt(void)
 	 * test NEED_RESCHED:
 	 */
 	smp_mb();
-	if (!need_resched())
+	if (!need_resched()) {
 		safe_halt();
+		local_irq_disable();
+	}
 	current_thread_info()->status |= TS_POLLING;
 }
 
@@ -421,7 +423,9 @@ static void acpi_processor_idle(void)
 		else
 			acpi_safe_halt();
 
-		local_irq_enable();
+		if (irqs_disabled())
+			local_irq_enable();
+
 		return;
 	}
 
@@ -530,7 +534,9 @@ static void acpi_processor_idle(void)
 		 *       skew otherwise.
 		 */
 		sleep_ticks = 0xFFFFFFFF;
-		local_irq_enable();
+		if (irqs_disabled())
+			local_irq_enable();
+
 		break;
 
 	case ACPI_STATE_C2:

trunk/drivers/acpi/video.c

@@ -807,40 +807,11 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
 static int acpi_video_bus_check(struct acpi_video_bus *video)
 {
 	acpi_status status = -ENOENT;
-	long device_id;
-	struct device *dev;
-	struct acpi_device *device;
+
 
 	if (!video)
 		return -EINVAL;
 
-	device = video->device;
-
-	status =
-	    acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
-
-	if (!ACPI_SUCCESS(status))
-		return -ENODEV;
-
-	/* We need to attempt to determine whether the _ADR refers to a
-	   PCI device or not. There's no terribly good way to do this,
-	   so the best we can hope for is to assume that there'll never
-	   be a video device in the host bridge */
-	if (device_id >= 0x10000) {
-		/* It looks like a PCI device. Does it exist? */
-		dev = acpi_get_physical_device(device->handle);
-	} else {
-		/* It doesn't look like a PCI device. Does its parent
-		   exist? */
-		acpi_handle phandle;
-		if (acpi_get_parent(device->handle, &phandle))
-			return -ENODEV;
-		dev = acpi_get_physical_device(phandle);
-	}
-	if (!dev)
-		return -ENODEV;
-	put_device(dev);
-
 	/* Since there is no HID, CID and so on for VGA driver, we have
 	 * to check well known required nodes.
 	 */
@@ -1366,37 +1337,8 @@ acpi_video_bus_write_DOS(struct file *file,
 
 static int acpi_video_bus_add_fs(struct acpi_device *device)
 {
-	long device_id;
-	int status;
 	struct proc_dir_entry *entry = NULL;
 	struct acpi_video_bus *video;
-	struct device *dev;
-
-	status =
-	    acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
-
-	if (!ACPI_SUCCESS(status))
-		return -ENODEV;
-
-	/* We need to attempt to determine whether the _ADR refers to a
-	   PCI device or not. There's no terribly good way to do this,
-	   so the best we can hope for is to assume that there'll never
-	   be a video device in the host bridge */
-	if (device_id >= 0x10000) {
-		/* It looks like a PCI device. Does it exist? */
-		dev = acpi_get_physical_device(device->handle);
-	} else {
-		/* It doesn't look like a PCI device. Does its parent
-		   exist? */
-		acpi_handle phandle;
-		if (acpi_get_parent(device->handle, &phandle))
-			return -ENODEV;
-		dev = acpi_get_physical_device(phandle);
-	}
-	if (!dev)
-		return -ENODEV;
-	put_device(dev);
-
 
 
 	video = acpi_driver_data(device);

trunk/drivers/ata/Kconfig

@@ -30,6 +30,7 @@ config ATA_NONSTANDARD
 config ATA_ACPI
 	bool
 	depends on ACPI && PCI
+	select ACPI_DOCK
 	default y
 	help
 	  This option adds support for ATA-related ACPI objects.

trunk/drivers/block/Kconfig

@@ -44,16 +44,6 @@ config MAC_FLOPPY
 	  If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
 	  floppy controller, say Y here. Most commonly found in PowerMacs.
 
-config BLK_DEV_PS2
-	tristate "PS/2 ESDI hard disk support"
-	depends on MCA && MCA_LEGACY && BROKEN
-	help
-	  Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
-	  hard disk.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ps2esdi.
-
 config AMIGA_Z2RAM
 	tristate "Amiga Zorro II ramdisk support"
 	depends on ZORRO

trunk/drivers/block/Makefile

@@ -13,7 +13,6 @@ obj-$(CONFIG_ATARI_FLOPPY)	+= ataflop.o
 obj-$(CONFIG_AMIGA_Z2RAM)	+= z2ram.o
 obj-$(CONFIG_BLK_DEV_RAM)	+= brd.o
 obj-$(CONFIG_BLK_DEV_LOOP)	+= loop.o
-obj-$(CONFIG_BLK_DEV_PS2)	+= ps2esdi.o
 obj-$(CONFIG_BLK_DEV_XD)	+= xd.o
 obj-$(CONFIG_BLK_CPQ_DA)	+= cpqarray.o
 obj-$(CONFIG_BLK_CPQ_CISS_DA)  += cciss.o