---

yaml --- r: 81085 b: refs/heads/master c: 2c0b713 h: refs/heads/master i: 81083: f05e6ec v: v3
git-mirror · Dec 20, 2007 · cedbbb7 · cedbbb7
1 parent 202c3d0
commit cedbbb7
Show file tree

Hide file tree

Showing 62 changed files with 2,527 additions and 1,511 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1e7710390f95b7efb3f74fd2f8b5fc28656b458c
+refs/heads/master: 2c0b713f70ecccaf4f535caf602f41350a9f484a
diff --git a/trunk/Documentation/powerpc/booting-without-of.txt b/trunk/Documentation/powerpc/booting-without-of.txt
@@ -1223,16 +1223,14 @@ platforms are moved over to use the flattened-device-tree model.
 
   Required properties:
     - reg : Offset and length of the register set for the device
-    - device_type : Should be "mdio"
     - compatible : Should define the compatible device type for the
-      mdio.  Currently, this is most likely to be "gianfar"
+      mdio.  Currently, this is most likely to be "fsl,gianfar-mdio"
 
   Example:
 
 	mdio@24520 {
 		reg = <24520 20>;
-		device_type = "mdio"; 
-		compatible = "gianfar";
+		compatible = "fsl,gianfar-mdio";
 
 		ethernet-phy@0 {
 			......
@@ -1631,6 +1629,19 @@ platforms are moved over to use the flattened-device-tree model.
    - interrupt-parent : the phandle for the interrupt controller that
      services interrupts for this device.
    - pio-handle : The phandle for the Parallel I/O port configuration.
+   - rx-clock-name: the UCC receive clock source
+     "none": clock source is disabled
+     "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+     "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+   - tx-clock-name: the UCC transmit clock source
+     "none": clock source is disabled
+     "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+     "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+   The following two properties are deprecated.  rx-clock has been replaced
+   with rx-clock-name, and tx-clock has been replaced with tx-clock-name.
+   Drivers that currently use the deprecated properties should continue to
+   do so, in order to support older device trees, but they should be updated
+   to check for the new properties first.
    - rx-clock : represents the UCC receive clock source.
      0x00 : clock source is disabled;
      0x1~0x10 : clock source is BRG1~BRG16 respectively;

diff --git a/trunk/arch/powerpc/boot/dts/kuroboxHD.dts b/trunk/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -23,6 +23,12 @@ XXXX add flash parts, rtc, ??
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -60,7 +66,7 @@ XXXX add flash parts, rtc, ??
 		i2c@80003000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "i2c";
+			cell-index = <0>;
 			compatible = "fsl-i2c";
 			reg = <80003000 1000>;
 			interrupts = <5 2>;
@@ -73,7 +79,8 @@ XXXX add flash parts, rtc, ??
 			};
 		};
 
-		serial@80004500 {
+		serial0: serial@80004500 {
+			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <80004500 8>;
@@ -83,7 +90,8 @@ XXXX add flash parts, rtc, ??
 			interrupt-parent = <&mpic>;
 		};
 
-		serial@80004600 {
+		serial1: serial@80004600 {
+			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <80004600 8>;
@@ -102,7 +110,7 @@ XXXX add flash parts, rtc, ??
 			reg = <80040000 40000>;
 		};
 
-		pci@fec00000 {
+		pci0: pci@fec00000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;

diff --git a/trunk/arch/powerpc/boot/dts/kuroboxHG.dts b/trunk/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -23,6 +23,12 @@ XXXX add flash parts, rtc, ??
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -60,7 +66,7 @@ XXXX add flash parts, rtc, ??
 		i2c@80003000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "i2c";
+			cell-index = <0>;
 			compatible = "fsl-i2c";
 			reg = <80003000 1000>;
 			interrupts = <5 2>;
@@ -73,7 +79,8 @@ XXXX add flash parts, rtc, ??
 			};
 		};
 
-		serial@80004500 {
+		serial0: serial@80004500 {
+			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <80004500 8>;
@@ -83,7 +90,8 @@ XXXX add flash parts, rtc, ??
 			interrupt-parent = <&mpic>;
 		};
 
-		serial@80004600 {
+		serial1: serial@80004600 {
+			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <80004600 8>;
@@ -102,7 +110,7 @@ XXXX add flash parts, rtc, ??
 			reg = <80040000 40000>;
 		};
 
-		pci@fec00000 {
+		pci0: pci@fec00000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;

diff --git a/trunk/arch/powerpc/boot/dts/lite5200.dts b/trunk/arch/powerpc/boot/dts/lite5200.dts
@@ -284,7 +284,8 @@
 		};
 
 		i2c@3d00 {
-			device_type = "i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "mpc5200-i2c","fsl-i2c";
 			cell-index = <0>;
 			reg = <3d00 40>;
@@ -294,7 +295,8 @@
 		};
 
 		i2c@3d40 {
-			device_type = "i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "mpc5200-i2c","fsl-i2c";
 			cell-index = <1>;
 			reg = <3d40 40>;

diff --git a/trunk/arch/powerpc/boot/dts/lite5200b.dts b/trunk/arch/powerpc/boot/dts/lite5200b.dts
@@ -300,7 +300,8 @@
 		};
 
 		i2c@3d00 {
-			device_type = "i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
 			cell-index = <0>;
 			reg = <3d00 40>;
@@ -310,7 +311,8 @@
 		};
 
 		i2c@3d40 {
-			device_type = "i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
 			cell-index = <1>;
 			reg = <3d40 40>;

diff --git a/trunk/arch/powerpc/boot/dts/mpc8313erdb.dts b/trunk/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -15,6 +15,14 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -52,7 +60,9 @@
 		};
 
 		i2c@3000 {
-			device_type = "i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
@@ -61,7 +71,9 @@
 		};
 
 		i2c@3100 {
-			device_type = "i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <f 8>;
@@ -91,11 +103,10 @@
 		};
 
 		mdio@24520 {
-			device_type = "mdio";
-			compatible = "gianfar";
-			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <24520 20>;
 			phy1: ethernet-phy@1 {
 				interrupt-parent = < &ipic >;
 				interrupts = <13 8>;
@@ -110,7 +121,8 @@
 			};
 		};
 
-		ethernet@24000 {
+		enet0: ethernet@24000 {
+			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
@@ -121,7 +133,8 @@
 			phy-handle = < &phy1 >;
 		};
 
-		ethernet@25000 {
+		enet1: ethernet@25000 {
+			cell-index = <1>;
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
@@ -132,7 +145,8 @@
 			phy-handle = < &phy4 >;
 		};
 
-		serial@4500 {
+		serial0: serial@4500 {
+			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <4500 100>;
@@ -141,7 +155,8 @@
 			interrupt-parent = < &ipic >;
 		};
 
-		serial@4600 {
+		serial1: serial@4600 {
+			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <4600 100>;
@@ -179,7 +194,8 @@
 		};
 	};
 
-	pci@e0008500 {
+	pci0: pci@e0008500 {
+		cell-index = <1>;
 		interrupt-map-mask = <f800 0 0 7>;
 		interrupt-map = <
 

diff --git a/trunk/arch/powerpc/boot/dts/mpc832x_mds.dts b/trunk/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -15,6 +15,14 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -59,7 +67,7 @@
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			device_type = "i2c";
+			cell-index = <0>;
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
@@ -72,7 +80,8 @@
 			};
 		};
 
-		serial@4500 {
+		serial0: serial@4500 {
+			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <4500 100>;
@@ -81,7 +90,8 @@
 			interrupt-parent = < &ipic >;
 		};
 
-		serial@4600 {
+		serial1: serial@4600 {
+			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <4600 100>;
@@ -208,44 +218,34 @@
 			mode = "slave";
 		};
 
-		ucc@2200 {
+		enet0: ucc@2200 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <3>;
 			device-id = <3>;
 			reg = <2200 200>;
 			interrupts = <22>;
 			interrupt-parent = < &qeic >;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock = <19>;
-			tx-clock = <1a>;
+			rx-clock-name = "clk9";
+			tx-clock-name = "clk10";
 			phy-handle = < &phy3 >;
 			pio-handle = < &pio3 >;
 		};
 
-		ucc@3200 {
+		enet1: ucc@3200 {
 			device_type = "network";
 			compatible = "ucc_geth";
 			model = "UCC";
+			cell-index = <4>;
 			device-id = <4>;
 			reg = <3200 200>;
 			interrupts = <23>;
 			interrupt-parent = < &qeic >;
-			/*
-			 * mac-address is deprecated and will be removed
-			 * in 2.6.25.  Only recent versions of
-			 * U-Boot support local-mac-address, however.
-			 */
-			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock = <17>;
-			tx-clock = <18>;
+			rx-clock-name = "clk7";
+			tx-clock-name = "clk8";
 			phy-handle = < &phy4 >;
 			pio-handle = < &pio4 >;
 		};
@@ -283,7 +283,8 @@
 		};
 	};
 
-	pci@e0008500 {
+	pci0: pci@e0008500 {
+		cell-index = <1>;
 		interrupt-map-mask = <f800 0 0 7>;
 		interrupt-map = <
 				/* IDSEL 0x11 AD17 */