---

yaml
---
r: 355514
b: refs/heads/master
c: 3d7b2c6
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 09810a853b9a7920ba8c250d18815ef236effc47
+refs/heads/master: 3d7b2c6087d011df3213d286b034f5716eae3209

trunk/Documentation/DocBook/media/v4l/driver.xml

@@ -116,15 +116,15 @@ my_suspend              (struct pci_dev *               pci_dev,
 	return 0; /* a negative value on error, 0 on success. */
 }
 
-static void __devexit
+static void
 my_remove               (struct pci_dev *               pci_dev)
 {
 	my_device *my = pci_get_drvdata (pci_dev);
 
 	/* Describe me. */
 }
 
-static int __devinit
+static int
 my_probe                (struct pci_dev *               pci_dev,
 			 const struct pci_device_id *   pci_id)
 {
@@ -157,7 +157,7 @@ my_pci_driver = {
 	.id_table = my_pci_device_ids,
 
 	.probe    = my_probe,
-	.remove   = __devexit_p (my_remove),
+	.remove   = my_remove,
 
 	/* Power management functions. */
 	.suspend  = my_suspend,

trunk/Documentation/PCI/pci-iov-howto.txt

@@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:
 
 Following piece of code illustrates the usage of the SR-IOV API.
 
-static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	pci_enable_sriov(dev, NR_VIRTFN);
 
@@ -85,7 +85,7 @@ static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *
 	return 0;
 }
 
-static void __devexit dev_remove(struct pci_dev *dev)
+static void dev_remove(struct pci_dev *dev)
 {
 	pci_disable_sriov(dev);
 
@@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
 	.name =		"SR-IOV Physical Function driver",
 	.id_table =	dev_id_table,
 	.probe =	dev_probe,
-	.remove =	__devexit_p(dev_remove),
+	.remove =	dev_remove,
 	.suspend =	dev_suspend,
 	.resume =	dev_resume,
 	.shutdown =	dev_shutdown,

trunk/Documentation/PCI/pci.txt

@@ -183,33 +183,13 @@ Please mark the initialization and cleanup functions where appropriate
 			initializes.
 	__exit		Exit code. Ignored for non-modular drivers.
 
-
-	__devinit	Device initialization code.
-			Identical to __init if the kernel is not compiled
-			with CONFIG_HOTPLUG, normal function otherwise.
-	__devexit	The same for __exit.
-
 Tips on when/where to use the above attributes:
 	o The module_init()/module_exit() functions (and all
 	  initialization functions called _only_ from these)
 	  should be marked __init/__exit.
 
 	o Do not mark the struct pci_driver.
 
-	o The ID table array should be marked __devinitconst; this is done
-	  automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
-
-	o The probe() and remove() functions should be marked __devinit
-	  and __devexit respectively.  All initialization functions
-	  exclusively called by the probe() routine, can be marked __devinit.
-	  Ditto for remove() and __devexit.
-
-	o If mydriver_remove() is marked with __devexit(), then all address
-	  references to mydriver_remove must use __devexit_p(mydriver_remove)
-	  (in the struct pci_driver declaration for example).
-	  __devexit_p() will generate the function name _or_ NULL if the
-	  function will be discarded.  For an example, see drivers/net/tg3.c.
-
 	o Do NOT mark a function if you are not sure which mark to use.
 	  Better to not mark the function than mark the function wrong.
 

trunk/Documentation/acpi/enumeration.txt

@@ -185,7 +185,7 @@ input driver:
 			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
 		},
 		.probe		= mpu3050_probe,
-		.remove		= __devexit_p(mpu3050_remove),
+		.remove		= mpu3050_remove,
 		.id_table	= mpu3050_ids,
 	};
 

trunk/Documentation/devicetree/bindings/arm/sirf.txt

@@ -1,3 +1,9 @@
-prima2 "cb" evaluation board
+CSR SiRFprimaII and SiRFmarco device tree bindings.
+========================================
+
 Required root node properties:
-    - compatible = "sirf,prima2-cb", "sirf,prima2";
+    - compatible:
+    - "sirf,prima2-cb" : prima2 "cb" evaluation board
+    - "sirf,marco-cb" : marco "cb" evaluation board
+    - "sirf,prima2" : prima2 device based board
+    - "sirf,marco" : marco device based board

trunk/Documentation/devicetree/bindings/arm/vt8500.txt

@@ -12,3 +12,11 @@ compatible = "wm,wm8505";
 Boards with the Wondermedia WM8650 SoC shall have the following properties:
 Required root node property:
 compatible = "wm,wm8650";
+
+Boards with the Wondermedia WM8750 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8750";
+
+Boards with the Wondermedia WM8850 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8850";

trunk/Documentation/devicetree/bindings/clock/imx23-clock.txt

@@ -60,11 +60,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx23-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 32 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006c000 {

trunk/Documentation/devicetree/bindings/clock/imx25-clock.txt

@@ -146,10 +146,6 @@ clks: ccm@53f80000 {
 	compatible = "fsl,imx25-ccm";
 	reg = <0x53f80000 0x4000>;
 	interrupts = <31>;
-	clock-output-names = ...
-			"uart_ipg",
-			"uart_serial",
-			...;
 };
 
 uart1: serial@43f90000 {

trunk/Documentation/devicetree/bindings/clock/imx28-clock.txt

@@ -83,11 +83,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx28-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 45 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006a000 {

trunk/Documentation/devicetree/bindings/clock/imx31-clock.txt

@@ -0,0 +1,91 @@
+* Clock bindings for Freescale i.MX31
+
+Required properties:
+- compatible: Should be "fsl,imx31-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX31
+clocks and IDs.
+
+	Clock		    ID
+	-----------------------
+	dummy	             0
+	ckih                 1
+	ckil                 2
+	mpll                 3
+	spll                 4
+	upll                 5
+	mcu_main             6
+	hsp                  7
+	ahb                  8
+	nfc                  9
+	ipg                  10
+	per_div              11
+	per                  12
+	csi_sel              13
+	fir_sel              14
+	csi_div              15
+	usb_div_pre          16
+	usb_div_post         17
+	fir_div_pre          18
+	fir_div_post         19
+	sdhc1_gate           20
+	sdhc2_gate           21
+	gpt_gate             22
+	epit1_gate           23
+	epit2_gate           24
+	iim_gate             25
+	ata_gate             26
+	sdma_gate            27
+	cspi3_gate           28
+	rng_gate             29
+	uart1_gate           30
+	uart2_gate           31
+	ssi1_gate            32
+	i2c1_gate            33
+	i2c2_gate            34
+	i2c3_gate            35
+	hantro_gate          36
+	mstick1_gate         37
+	mstick2_gate         38
+	csi_gate             39
+	rtc_gate             40
+	wdog_gate            41
+	pwm_gate             42
+	sim_gate             43
+	ect_gate             44
+	usb_gate             45
+	kpp_gate             46
+	ipu_gate             47
+	uart3_gate           48
+	uart4_gate           49
+	uart5_gate           50
+	owire_gate           51
+	ssi2_gate            52
+	cspi1_gate           53
+	cspi2_gate           54
+	gacc_gate            55
+	emi_gate             56
+	rtic_gate            57
+	firi_gate            58
+
+Examples:
+
+clks: ccm@53f80000{
+	compatible = "fsl,imx31-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <0 31 0x04 0 53 0x04>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@43f90000 {
+	compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+	reg = <0x43f90000 0x4000>;
+	interrupts = <45>;
+	clocks = <&clks 10>, <&clks 30>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};

trunk/Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -211,10 +211,6 @@ clks: ccm@020c4000 {
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
-	clock-output-names = ...
-			     "uart_ipg",
-			     "uart_serial",
-			     ...;
 };
 
 uart1: serial@02020000 {

trunk/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt

@@ -1,4 +1,19 @@
-GPIO line that should be set high/low to power off a device
+Driver a GPIO line that can be used to turn the power off.
+
+The driver supports both level triggered and edge triggered power off.
+At driver load time, the driver will request the given gpio line and
+install a pm_power_off handler. If the optional properties 'input' is
+not found, the GPIO line will be driven in the inactive
+state. Otherwise its configured as an input.
+
+When the pm_power_off is called, the gpio is configured as an output,
+and drive active, so triggering a level triggered power off
+condition. This will also cause an inactive->active edge condition, so
+triggering positive edge triggered power off. After a delay of 100ms,
+the GPIO is set to inactive, thus causing an active->inactive edge,
+triggering negative edge triggered power off. After another 100ms
+delay the GPIO is driver active again. If the power is still on and
+the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
 
 Required properties:
 - compatible : should be "gpio-poweroff".
@@ -13,10 +28,9 @@ Optional properties:
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
 
-
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+	gpios = <&gpio 4 0>;
 };

trunk/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt

@@ -0,0 +1,47 @@
+CSR SiRFprimaII pinmux controller
+
+Required properties:
+- compatible	: "sirf,prima2-pinctrl"
+- reg		: Address range of the pinctrl registers
+- interrupts    : Interrupts used by every GPIO group
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller  : Marks the device node as an interrupt controller
+Optional properties:
+- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
+- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- sirf,pins : An array of strings. Each string contains the name of a group.
+- sirf,function: A string containing the name of the function to mux to the
+  group.
+
+  Valid values for group and function names can be found from looking at the
+  group and function arrays in driver files:
+  drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+ uart2_pins_a: uart2@0 {
+         uart {
+                 sirf,pins = "uart2grp";
+                 sirf,function = "uart2";
+         };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+         uart {
+                 sirf,pins = "uart2_nostreamctrlgrp";
+                 sirf,function = "uart2_nostreamctrl";
+         };
+ };
+
+For a specific board, if it wants to use uart2 without hardware flow control,
+it can add the following to its board-specific .dts file.
+uart2: uart@0xb0070000 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_noflow_pins_a>;
+}

trunk/Documentation/i2c/instantiating-devices

@@ -91,7 +91,7 @@ Example (from the nxp OHCI driver):
 
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
 
-static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
+static int usb_hcd_nxp_probe(struct platform_device *pdev)
 {
 	(...)
 	struct i2c_adapter *i2c_adap;