Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB: bttv: Move I2C IR initialization
  V4L/DVB: Video : pwc : Fix regression in pwc_set_shutter_speed caused by bad 	constant => sizeof conversion.
  soc-camera: mt9t112: modify exiting conditions from standby mode
  V4L/DVB: cxusb: Select all required frontend and tuner modules
  V4L/DVB: dvb: l64781.ko broken with gcc 4.5

drivers/media/dvb/dvb-usb/Kconfig

@@ -112,11 +112,13 @@ config DVB_USB_CXUSB
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+	select DVB_ATBM8830 if !DVB_FE_CUSTOMISE
+	select DVB_LGS8GXX if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode

drivers/media/dvb/frontends/l64781.c

@@ -192,8 +192,8 @@ static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_pa
 	spi_bias *= qam_tab[p->constellation];
 	spi_bias /= p->code_rate_HP + 1;
 	spi_bias /= (guard_tab[p->guard_interval] + 32);
-	spi_bias *= 1000ULL;
-	spi_bias /= 1000ULL + ppm/1000;
+	spi_bias *= 1000;
+	spi_bias /= 1000 + ppm/1000;
 	spi_bias *= p->code_rate_HP;
 
 	val0x04 = (p->transmission_mode << 2) | p->guard_interval;

drivers/media/video/bt8xx/bttv-driver.c

@@ -4461,6 +4461,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 		request_modules(btv);
 	}
 
+	init_bttv_i2c_ir(btv);
 	bttv_input_init(btv);
 
 	/* everything is fine */

drivers/media/video/bt8xx/bttv-i2c.c

@@ -388,7 +388,12 @@ int __devinit init_bttv_i2c(struct bttv *btv)
 	if (0 == btv->i2c_rc && i2c_scan)
 		do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client);
 
-	/* Instantiate the IR receiver device, if present */
+	return btv->i2c_rc;
+}
+
+/* Instantiate the I2C IR receiver device, if present */
+void __devinit init_bttv_i2c_ir(struct bttv *btv)
+{
 	if (0 == btv->i2c_rc) {
 		struct i2c_board_info info;
 		/* The external IR receiver is at i2c address 0x34 (0x35 for
@@ -408,7 +413,6 @@ int __devinit init_bttv_i2c(struct bttv *btv)
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
 		i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
 	}
-	return btv->i2c_rc;
 }
 
 int __devexit fini_bttv_i2c(struct bttv *btv)

drivers/media/video/bt8xx/bttvp.h

@@ -279,6 +279,7 @@ extern unsigned int bttv_debug;
 extern unsigned int bttv_gpio;
 extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
 extern int init_bttv_i2c(struct bttv *btv);
+extern void init_bttv_i2c_ir(struct bttv *btv);
 extern int fini_bttv_i2c(struct bttv *btv);
 
 #define bttv_printk if (bttv_verbose) printk

drivers/media/video/mt9t112.c

@@ -514,7 +514,7 @@ static int mt9t112_init_pll(const struct i2c_client *client)
 	/* poll to verify out of standby. Must Poll this bit */
 	for (i = 0; i < 100; i++) {
 		mt9t112_reg_read(data, client, 0x0018);
-		if (0x4000 & data)
+		if (!(0x4000 & data))
 			break;
 
 		mdelay(10);

drivers/media/video/pwc/pwc-ctrl.c

@@ -753,7 +753,7 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value)
 		buf[0] = 0xff; /* fixed */
 
 	ret = send_control_msg(pdev,
-		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
+		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1);
 
 	if (!mode && ret >= 0) {
 		if (value < 0)