---

yaml
---
r: 200792
b: refs/heads/master
c: ad642d9
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ca57926d53580f7c950496cb7ef6d7930610e1dd
+refs/heads/master: ad642d9f58f1af6e96efccb5f84e52c6d01db5c4

trunk/arch/arm/mm/Kconfig

@@ -735,6 +735,25 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config DMA_CACHE_RWFO
+	bool "Enable read/write for ownership DMA cache maintenance"
+	depends on CPU_V6 && SMP
+	default y
+	help
+	  The Snoop Control Unit on ARM11MPCore does not detect the
+	  cache maintenance operations and the dma_{map,unmap}_area()
+	  functions may leave stale cache entries on other CPUs. By
+	  enabling this option, Read or Write For Ownership in the ARMv6
+	  DMA cache maintenance functions is performed. These LDR/STR
+	  instructions change the cache line state to shared or modified
+	  so that the cache operation has the desired effect.
+
+	  Note that the workaround is only valid on processors that do
+	  not perform speculative loads into the D-cache. For such
+	  processors, if cache maintenance operations are not broadcast
+	  in hardware, other workarounds are needed (e.g. cache
+	  maintenance broadcasting in software via FIQ).
+
 config OUTER_CACHE
 	bool
 

trunk/arch/arm/mm/cache-v6.S

@@ -211,7 +211,7 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 	str	r2, [r0]			@ write for ownership
 #endif
@@ -235,7 +235,7 @@ v6_dma_inv_range:
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 #endif
 #ifdef HARVARD_CACHE
@@ -258,7 +258,7 @@ v6_dma_clean_range:
 ENTRY(v6_dma_flush_range)
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 	str	r2, [r0]			@ write for ownership
 #endif
@@ -284,9 +284,13 @@ ENTRY(v6_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
+#ifndef CONFIG_DMA_CACHE_RWFO
+	b	v6_dma_clean_range
+#else
 	teq	r2, #DMA_TO_DEVICE
 	beq	v6_dma_clean_range
 	b	v6_dma_flush_range
+#endif
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -296,6 +300,11 @@ ENDPROC(v6_dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
+#ifndef CONFIG_DMA_CACHE_RWFO
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v6_dma_inv_range
+#endif
 	mov	pc, lr
 ENDPROC(v6_dma_unmap_area)