---

yaml
---
r: 160948
b: refs/heads/master
c: c378aa2
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c7c8f615c8d1b49225ed86406603e7ac24d2a6d9
+refs/heads/master: c378aa275e1476218a6b438056a4cd48eb1eca0f

trunk/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt

@@ -0,0 +1,75 @@
+		S3C24XX CPUfreq support
+		=======================
+
+Introduction
+------------
+
+ The S3C24XX series support a number of power saving systems, such as
+ the ability to change the core, memory and peripheral operating
+ frequencies. The core control is exported via the CPUFreq driver
+ which has a number of different manual or automatic controls over the
+ rate the core is running at.
+
+ There are two forms of the driver depending on the specific CPU and
+ how the clocks are arranged. The first implementation used as single
+ PLL to feed the ARM, memory and peripherals via a series of dividers
+ and muxes and this is the implementation that is documented here. A
+ newer version where there is a seperate PLL and clock divider for the
+ ARM core is available as a seperate driver.
+
+
+Layout
+------
+
+ The code core manages the CPU specific drivers, any data that they
+ need to register and the interface to the generic drivers/cpufreq
+ system. Each CPU registers a driver to control the PLL, clock dividers
+ and anything else associated with it. Any board that wants to use this
+ framework needs to supply at least basic details of what is required.
+
+ The core registers with drivers/cpufreq at init time if all the data
+ necessary has been supplied.
+
+
+CPU support
+-----------
+
+ The support for each CPU depends on the facilities provided by the
+ SoC and the driver as each device has different PLL and clock chains
+ associated with it.
+
+
+Slow Mode
+---------
+
+ The SLOW mode where the PLL is turned off altogether and the
+ system is fed by the external crystal input is currently not
+ supported.
+
+
+sysfs
+-----
+
+ The core code exports extra information via sysfs in the directory
+ devices/system/cpu/cpu0/arch-freq.
+
+
+Board Support
+-------------
+
+ Each board that wants to use the cpufreq code must register some basic
+ information with the core driver to provide information about what the
+ board requires and any restrictions being placed on it.
+
+ The board needs to supply information about whether it needs the IO bank
+ timings changing, any maximum frequency limits and information about the
+ SDRAM refresh rate.
+
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2009 Simtec Electronics
+Licensed under GPLv2

trunk/Documentation/filesystems/sysfs.txt

@@ -23,7 +23,8 @@ interface.
 Using sysfs
 ~~~~~~~~~~~
 
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
 
     mount -t sysfs sysfs /sys 
 

trunk/Documentation/sound/alsa/Procfile.txt

@@ -101,6 +101,8 @@ card*/pcm*/xrun_debug
 	  bit 0 = Enable XRUN/jiffies debug messages
 	  bit 1 = Show stack trace at XRUN / jiffies check
 	  bit 2 = Enable additional jiffies check
+	  bit 3 = Log hwptr update at each period interrupt
+	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -117,6 +119,9 @@ card*/pcm*/xrun_debug
 	buggy) hardware that doesn't give smooth pointer updates.
 	This feature is enabled via the bit 2.
 
+	Bits 3 and 4 are for logging the hwptr records.  Note that
+	these will give flood of kernel messages.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 

trunk/Documentation/video4linux/CARDLIST.em28xx

@@ -20,7 +20,7 @@
  19 -> EM2860/SAA711X Reference Design          (em2860)
  20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
  21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber      (em2750)        [eb1a:2750,eb1a:2751]
  23 -> Huaqi DLCW-130                           (em2750)
  24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
  25 -> Gadmei UTV310                            (em2820/em2840)

trunk/Documentation/video4linux/gspca.txt

@@ -44,7 +44,9 @@ zc3xx		0458:7007	Genius VideoCam V2
 zc3xx		0458:700c	Genius VideoCam V3
 zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
+sn9c20x		0458:7029	Genius Look 320s
 sonixj		0458:702e	Genius Slim 310 NB
+sn9c20x		045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)
 sonixj		045e:00f5	MicroSoft VX3000
 sonixj		045e:00f7	MicroSoft VX1000
 ov519		045e:028c	Micro$oft xbox cam
@@ -282,6 +284,28 @@ sonixj		0c45:613a	Microdia Sonix PC Camera
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
 sonixj		0c45:6143	Sonix Pccam168
+sn9c20x		0c45:6240	PC Camera (SN9C201 + MT9M001)
+sn9c20x		0c45:6242	PC Camera (SN9C201 + MT9M111)
+sn9c20x		0c45:6248	PC Camera (SN9C201 + OV9655)
+sn9c20x		0c45:624e	PC Camera (SN9C201 + SOI968)
+sn9c20x		0c45:624f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6251	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6253	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6260	PC Camera (SN9C201 + OV7670)
+sn9c20x		0c45:6270	PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:627b	PC Camera (SN9C201 + OV7660)
+sn9c20x		0c45:627c	PC Camera (SN9C201 + HV7131R)
+sn9c20x		0c45:627f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6280	PC Camera (SN9C202 + MT9M001)
+sn9c20x		0c45:6282	PC Camera (SN9C202 + MT9M111)
+sn9c20x		0c45:6288	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:628e	PC Camera (SN9C202 + SOI968)
+sn9c20x		0c45:628f	PC Camera (SN9C202 + OV9650)
+sn9c20x		0c45:62a0	PC Camera (SN9C202 + OV7670)
+sn9c20x		0c45:62b0	PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:62b3	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:62bb	PC Camera (SN9C202 + OV7660)
+sn9c20x		0c45:62bc	PC Camera (SN9C202 + HV7131R)
 sunplus		0d64:0303	Sunplus FashionCam DXG
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
@@ -290,6 +314,7 @@ spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 ov534		1415:2000	Sony HD Eye for PS3 (SLEH 00201)
 pac207		145f:013a	Trust WB-1300N
+sn9c20x		145f:013d	Trust WB-3600R
 vc032x		15b8:6001	HP 2.0 Megapixel
 vc032x		15b8:6002	HP 2.0 Megapixel rz406aa
 spca501		1776:501c	Arowana 300K CMOS Camera
@@ -300,4 +325,11 @@ spca500		2899:012c	Toptro Industrial
 spca508		8086:0110	Intel Easy PC Camera
 spca500		8086:0630	Intel Pocket PC Camera
 spca506		99fa:8988	Grandtec V.cap
+sn9c20x		a168:0610	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0611	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0613	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0618	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0614	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0615	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0617	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
 spca561		abcd:cdee	Petcam

trunk/arch/alpha/include/asm/tlb.h

@@ -9,7 +9,7 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)			pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd)			pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address)		pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address)		pmd_free((tlb)->mm, pmd)
 
 #endif

trunk/arch/arm/Kconfig

@@ -126,6 +126,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
+config ARCH_HAS_CPUFREQ
+	bool
+	help
+	  Internal node to signify that the ARCH has CPUFREQ support
+	  and that the relevant menu configurations are displayed for
+	  it.
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -203,6 +210,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ICST525
@@ -509,6 +517,7 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
@@ -551,6 +560,7 @@ config ARCH_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -563,6 +573,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -573,6 +584,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_HAS_CPUFREQ
 	help
 	  Samsung S3C64XX series based systems
 
@@ -632,6 +644,7 @@ config ARCH_OMAP
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -1241,7 +1254,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1276,6 +1289,52 @@ config CPU_FREQ_S3C64XX
 	bool "CPUfreq support for Samsung S3C64XX CPUs"
 	depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	select CPU_FREQ_S3C
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency"
+	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on CPU_FREQ_S3C24XX && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"

trunk/arch/arm/include/asm/tlb.h

@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 

trunk/arch/arm/mach-s3c2410/Kconfig

@@ -12,6 +12,7 @@ config CPU_S3C2410
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
+	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -45,6 +46,22 @@ config MACH_BAST_IDE
 	  Internal node for machines with an BAST style IDE
 	  interface
 
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLLTABLE
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
@@ -79,6 +96,7 @@ config MACH_N30
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
+	select S3C2410_IOTIMING if S3C2410_CPUFREQ
 	select PM_SIMTEC if PM
 	select SIMTEC_NOR
 	select MACH_BAST_IDE

trunk/arch/arm/mach-s3c2410/Makefile

@@ -15,6 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
 # Machine support