---

yaml
---
r: 376983
b: refs/heads/master
c: a568fa1
h: refs/heads/master
i:
  376981: f17d804
  376979: bc757e7
  376975: d8de91b
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c2853c8df57f49620d26f317d7d43347c29bfc2e
+refs/heads/master: a568fa1c91d4f0e565345119d0b942cc7f74ca3d

trunk/arch/mips/include/asm/mmu_context.h

@@ -117,7 +117,7 @@ get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 	if (! ((asid += ASID_INC) & ASID_MASK) ) {
 		if (cpu_has_vtag_icache)
 			flush_icache_all();
-#ifdef CONFIG_VIRTUALIZATION
+#ifdef CONFIG_KVM
 		kvm_local_flush_tlb_all();      /* start new asid cycle */
 #else
 		local_flush_tlb_all();	/* start new asid cycle */

trunk/arch/mips/kernel/ftrace.c

@@ -25,12 +25,16 @@
 #define MCOUNT_OFFSET_INSNS 4
 #endif
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+
 /* Arch override because MIPS doesn't need to run this from stop_machine() */
 void arch_ftrace_update_code(int command)
 {
 	ftrace_modify_all_code(command);
 }
 
+#endif
+
 /*
  * Check if the address is in kernel space
  *

trunk/arch/mips/kernel/idle.c

@@ -93,26 +93,27 @@ static void rm7k_wait_irqoff(void)
 }
 
 /*
- * The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter.
- * alchemy/common/time.c may override cpu_wait!
+ * Au1 'wait' is only useful when the 32kHz counter is used as timer,
+ * since coreclock (and the cp0 counter) stops upon executing it. Only an
+ * interrupt can wake it, so they must be enabled before entering idle modes.
  */
 static void au1k_wait(void)
 {
+	unsigned long c0status = read_c0_status() | 1;	/* irqs on */
+
 	__asm__(
 	"	.set	mips3			\n"
 	"	cache	0x14, 0(%0)		\n"
 	"	cache	0x14, 32(%0)		\n"
 	"	sync				\n"
-	"	nop				\n"
+	"	mtc0	%1, $12			\n" /* wr c0status */
 	"	wait				\n"
 	"	nop				\n"
 	"	nop				\n"
 	"	nop				\n"
 	"	nop				\n"
 	"	.set	mips0			\n"
-	: : "r" (au1k_wait));
-	local_irq_enable();
+	: : "r" (au1k_wait), "r" (c0status));
 }
 
 static int __initdata nowait;

trunk/drivers/block/rbd.c

@@ -519,8 +519,8 @@ static const struct block_device_operations rbd_bd_ops = {
 };
 
 /*
- * Initialize an rbd client instance.
- * We own *ceph_opts.
+ * Initialize an rbd client instance.  Success or not, this function
+ * consumes ceph_opts.
  */
 static struct rbd_client *rbd_client_create(struct ceph_options *ceph_opts)
 {
@@ -675,7 +675,8 @@ static int parse_rbd_opts_token(char *c, void *private)
 
 /*
  * Get a ceph client with specific addr and configuration, if one does
- * not exist create it.
+ * not exist create it.  Either way, ceph_opts is consumed by this
+ * function.
  */
 static struct rbd_client *rbd_get_client(struct ceph_options *ceph_opts)
 {
@@ -4697,8 +4698,10 @@ static int rbd_dev_image_id(struct rbd_device *rbd_dev)
 	return ret;
 }
 
-/* Undo whatever state changes are made by v1 or v2 image probe */
-
+/*
+ * Undo whatever state changes are made by v1 or v2 header info
+ * call.
+ */
 static void rbd_dev_unprobe(struct rbd_device *rbd_dev)
 {
 	struct rbd_image_header	*header;
@@ -4902,9 +4905,10 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping)
 	int tmp;
 
 	/*
-	 * Get the id from the image id object.  If it's not a
-	 * format 2 image, we'll get ENOENT back, and we'll assume
-	 * it's a format 1 image.
+	 * Get the id from the image id object.  Unless there's an
+	 * error, rbd_dev->spec->image_id will be filled in with
+	 * a dynamically-allocated string, and rbd_dev->image_format
+	 * will be set to either 1 or 2.
 	 */
 	ret = rbd_dev_image_id(rbd_dev);
 	if (ret)
@@ -4992,7 +4996,6 @@ static ssize_t rbd_add(struct bus_type *bus,
 		rc = PTR_ERR(rbdc);
 		goto err_out_args;
 	}
-	ceph_opts = NULL;	/* rbd_dev client now owns this */
 
 	/* pick the pool */
 	osdc = &rbdc->client->osdc;
@@ -5027,18 +5030,18 @@ static ssize_t rbd_add(struct bus_type *bus,
 	rbd_dev->mapping.read_only = read_only;
 
 	rc = rbd_dev_device_setup(rbd_dev);
-	if (!rc)
-		return count;
+	if (rc) {
+		rbd_dev_image_release(rbd_dev);
+		goto err_out_module;
+	}
+
+	return count;
 
-	rbd_dev_image_release(rbd_dev);
 err_out_rbd_dev:
 	rbd_dev_destroy(rbd_dev);
 err_out_client:
 	rbd_put_client(rbdc);
 err_out_args:
-	if (ceph_opts)
-		ceph_destroy_options(ceph_opts);
-	kfree(rbd_opts);
 	rbd_spec_put(spec);
 err_out_module:
 	module_put(THIS_MODULE);

trunk/drivers/gpu/drm/gma500/cdv_intel_display.c

@@ -1462,7 +1462,7 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
 	size_t addr = 0;
 	struct gtt_range *gt;
 	struct drm_gem_object *obj;
-	int ret;
+	int ret = 0;
 
 	/* if we want to turn of the cursor ignore width and height */
 	if (!handle) {
@@ -1499,7 +1499,8 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
 
 	if (obj->size < width * height * 4) {
 		dev_dbg(dev->dev, "buffer is to small\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto unref_cursor;
 	}
 
 	gt = container_of(obj, struct gtt_range, gem);
@@ -1508,7 +1509,7 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
 	ret = psb_gtt_pin(gt);
 	if (ret) {
 		dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
-		return ret;
+		goto unref_cursor;
 	}
 
 	addr = gt->offset;	/* Or resource.start ??? */
@@ -1532,9 +1533,14 @@ static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
 							struct gtt_range, gem);
 		psb_gtt_unpin(gt);
 		drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
-		psb_intel_crtc->cursor_obj = obj;
 	}
-	return 0;
+
+	psb_intel_crtc->cursor_obj = obj;
+	return ret;
+
+unref_cursor:
+	drm_gem_object_unreference(obj);
+	return ret;
 }
 
 static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
@@ -1750,13 +1756,27 @@ static void cdv_intel_crtc_destroy(struct drm_crtc *crtc)
 	kfree(psb_intel_crtc);
 }
 
+static void cdv_intel_crtc_disable(struct drm_crtc *crtc)
+{
+	struct gtt_range *gt;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+
+	if (crtc->fb) {
+		gt = to_psb_fb(crtc->fb)->gtt;
+		psb_gtt_unpin(gt);
+	}
+}
+
 const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
 	.dpms = cdv_intel_crtc_dpms,
 	.mode_fixup = cdv_intel_crtc_mode_fixup,
 	.mode_set = cdv_intel_crtc_mode_set,
 	.mode_set_base = cdv_intel_pipe_set_base,
 	.prepare = cdv_intel_crtc_prepare,
 	.commit = cdv_intel_crtc_commit,
+	.disable = cdv_intel_crtc_disable,
 };
 
 const struct drm_crtc_funcs cdv_intel_crtc_funcs = {

trunk/drivers/gpu/drm/gma500/framebuffer.c

@@ -121,8 +121,8 @@ static int psbfb_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	unsigned long address;
 	int ret;
 	unsigned long pfn;
-	/* FIXME: assumes fb at stolen base which may not be true */
-	unsigned long phys_addr = (unsigned long)dev_priv->stolen_base;
+	unsigned long phys_addr = (unsigned long)dev_priv->stolen_base +
+				  psbfb->gtt->offset;
 
 	page_num = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 	address = (unsigned long)vmf->virtual_address - (vmf->pgoff << PAGE_SHIFT);

trunk/drivers/gpu/drm/gma500/psb_intel_display.c

@@ -843,7 +843,7 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc,
 	struct gtt_range *cursor_gt = psb_intel_crtc->cursor_gt;
 	struct drm_gem_object *obj;
 	void *tmp_dst, *tmp_src;
-	int ret, i, cursor_pages;
+	int ret = 0, i, cursor_pages;
 
 	/* if we want to turn of the cursor ignore width and height */
 	if (!handle) {
@@ -880,7 +880,8 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc,
 
 	if (obj->size < width * height * 4) {
 		dev_dbg(dev->dev, "buffer is to small\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto unref_cursor;
 	}
 
 	gt = container_of(obj, struct gtt_range, gem);
@@ -889,13 +890,14 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc,
 	ret = psb_gtt_pin(gt);
 	if (ret) {
 		dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
-		return ret;
+		goto unref_cursor;
 	}
 
 	if (dev_priv->ops->cursor_needs_phys) {
 		if (cursor_gt == NULL) {
 			dev_err(dev->dev, "No hardware cursor mem available");
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto unref_cursor;
 		}
 
 		/* Prevent overflow */
@@ -936,9 +938,14 @@ static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc,
 							struct gtt_range, gem);
 		psb_gtt_unpin(gt);
 		drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
-		psb_intel_crtc->cursor_obj = obj;
 	}
-	return 0;
+
+	psb_intel_crtc->cursor_obj = obj;
+	return ret;
+
+unref_cursor:
+	drm_gem_object_unreference(obj);
+	return ret;
 }
 
 static int psb_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
@@ -1150,13 +1157,27 @@ static void psb_intel_crtc_destroy(struct drm_crtc *crtc)
 	kfree(psb_intel_crtc);
 }
 
+static void psb_intel_crtc_disable(struct drm_crtc *crtc)
+{
+	struct gtt_range *gt;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+
+	if (crtc->fb) {
+		gt = to_psb_fb(crtc->fb)->gtt;
+		psb_gtt_unpin(gt);
+	}
+}
+
 const struct drm_crtc_helper_funcs psb_intel_helper_funcs = {
 	.dpms = psb_intel_crtc_dpms,
 	.mode_fixup = psb_intel_crtc_mode_fixup,
 	.mode_set = psb_intel_crtc_mode_set,
 	.mode_set_base = psb_intel_pipe_set_base,
 	.prepare = psb_intel_crtc_prepare,
 	.commit = psb_intel_crtc_commit,
+	.disable = psb_intel_crtc_disable,
 };
 
 const struct drm_crtc_funcs psb_intel_crtc_funcs = {

trunk/drivers/gpu/drm/i915/intel_sdvo.c

@@ -1777,10 +1777,13 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 	 * arranged in priority order.
 	 */
 	intel_ddc_get_modes(connector, &intel_sdvo->ddc);
-	if (list_empty(&connector->probed_modes) == false)
-		goto end;
 
-	/* Fetch modes from VBT */
+	/*
+	 * Fetch modes from VBT. For SDVO prefer the VBT mode since some
+	 * SDVO->LVDS transcoders can't cope with the EDID mode. Since
+	 * drm_mode_probed_add adds the mode at the head of the list we add it
+	 * last.
+	 */
 	if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
 		newmode = drm_mode_duplicate(connector->dev,
 					     dev_priv->sdvo_lvds_vbt_mode);
@@ -1792,7 +1795,6 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 		}
 	}
 
-end:
 	list_for_each_entry(newmode, &connector->probed_modes, head) {
 		if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
 			intel_sdvo->sdvo_lvds_fixed_mode =
@@ -2790,12 +2792,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 			SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
 	}
 
-	/* Only enable the hotplug irq if we need it, to work around noisy
-	 * hotplug lines.
-	 */
-	if (intel_sdvo->hotplug_active)
-		intel_encoder->hpd_pin = HPD_SDVO_B ? HPD_SDVO_B : HPD_SDVO_C;
-
 	intel_encoder->compute_config = intel_sdvo_compute_config;
 	intel_encoder->disable = intel_disable_sdvo;
 	intel_encoder->mode_set = intel_sdvo_mode_set;
@@ -2814,6 +2810,14 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 		goto err_output;
 	}
 
+	/* Only enable the hotplug irq if we need it, to work around noisy
+	 * hotplug lines.
+	 */
+	if (intel_sdvo->hotplug_active) {
+		intel_encoder->hpd_pin =
+			intel_sdvo->is_sdvob ?  HPD_SDVO_B : HPD_SDVO_C;
+	}
+
 	/*
 	 * Cloning SDVO with anything is often impossible, since the SDVO
 	 * encoder can request a special input timing mode. And even if that's