Merge tag 'drm-intel-next-fixes-2015-08-16' of git://anongit.freedesk…

…top.org/drm-intel into drm-next

Bunch more fixes for 4.3, most of it skl fallout. It's not quite all yet,
there's still a few more patches pending to enable DDI-E correctly on skl.
Also included the dpms atomic work from Maarten since atomic is just a
pain and not including would cause piles of conflicts right from the
start.

* tag 'drm-intel-next-fixes-2015-08-16' of git://anongit.freedesktop.org/drm-intel: (67 commits)
  drm/i915: Per-DDI I_boost override
  drm/i915/skl: WaIgnoreDDIAStrap is forever, always init DDI A
  drm/i915: fix checksum write for automated test reply
  drm/i915: Contain the WA_REG macro
  drm/i915: Remove the failed context from the fpriv->context_idr
  drm/i915: Report IOMMU enabled status for GPU hangs
  drm/i915: Check idle to active before processing CSQ
  drm/i915: Set alternate aux for DDI-E
  drm/i915: Set power domain for DDI-E
  drm/i915: fix stolen bios_reserved checks
  drm/i915: Use masked write for Context Status Buffer Pointer
  drm/i915/skl WaDisableSbeCacheDispatchPortSharing
  drm/i915: Spam less on dp aux send/receive problems
  drm/i915: Handle return value in intel_pin_and_fence_fb_obj, v2.
  drm/i915: Only update mode related state if a modeset happened.
  drm/i915: Remove connectors_active.
  drm/i915: Remove connectors_active from intel_dp.c, v2.
  drm/i915: Remove connectors_active from sanitization, v2.
  drm/i915: Get rid of dpms handling.
  drm/i915: Make crtc checking use the atomic state, v2.
  ...

Documentation/DocBook/drm.tmpl

@@ -3982,7 +3982,6 @@ int num_ioctls;</synopsis>
         <title>Interrupt Handling</title>
 !Pdrivers/gpu/drm/i915/i915_irq.c interrupt handling
 !Fdrivers/gpu/drm/i915/i915_irq.c intel_irq_init intel_irq_init_hw intel_hpd_init
-!Fdrivers/gpu/drm/i915/i915_irq.c intel_irq_fini
 !Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_disable_interrupts
 !Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_enable_interrupts
       </sect2>
@@ -4197,6 +4196,23 @@ int num_ioctls;</synopsis>
         <title>Global GTT views</title>
 !Pdrivers/gpu/drm/i915/i915_gem_gtt.c Global GTT views
 !Idrivers/gpu/drm/i915/i915_gem_gtt.c
+      </sect2>
+      <sect2>
+        <title>GTT Fences and Swizzling</title>
+!Idrivers/gpu/drm/i915/i915_gem_fence.c
+        <sect3>
+          <title>Global GTT Fence Handling</title>
+!Pdrivers/gpu/drm/i915/i915_gem_fence.c fence register handling
+        </sect3>
+        <sect3>
+          <title>Hardware Tiling and Swizzling Details</title>
+!Pdrivers/gpu/drm/i915/i915_gem_fence.c tiling swizzling details
+        </sect3>
+      </sect2>
+      <sect2>
+        <title>Object Tiling IOCTLs</title>
+!Idrivers/gpu/drm/i915/i915_gem_tiling.c
+!Pdrivers/gpu/drm/i915/i915_gem_tiling.c buffer object tiling
       </sect2>
       <sect2>
         <title>Buffer Object Eviction</title>

drivers/gpu/drm/i915/Makefile

@@ -6,12 +6,13 @@
 
 # core driver code
 i915-y := i915_drv.o \
+	  i915_irq.o \
 	  i915_params.o \
           i915_suspend.o \
 	  i915_sysfs.o \
+	  intel_csr.o \
 	  intel_pm.o \
-	  intel_runtime_pm.o \
-	  intel_csr.o
+	  intel_runtime_pm.o
 
 i915-$(CONFIG_COMPAT)   += i915_ioc32.o
 i915-$(CONFIG_DEBUG_FS) += i915_debugfs.o
@@ -20,21 +21,20 @@ i915-$(CONFIG_DEBUG_FS) += i915_debugfs.o
 i915-y += i915_cmd_parser.o \
 	  i915_gem_batch_pool.o \
 	  i915_gem_context.o \
-	  i915_gem_render_state.o \
 	  i915_gem_debug.o \
 	  i915_gem_dmabuf.o \
 	  i915_gem_evict.o \
 	  i915_gem_execbuffer.o \
+	  i915_gem_fence.o \
 	  i915_gem_gtt.o \
 	  i915_gem.o \
+	  i915_gem_render_state.o \
 	  i915_gem_shrinker.o \
 	  i915_gem_stolen.o \
 	  i915_gem_tiling.o \
 	  i915_gem_userptr.o \
 	  i915_gpu_error.o \
-	  i915_irq.o \
 	  i915_trace_points.o \
-	  intel_hotplug.o \
 	  intel_lrc.o \
 	  intel_mocs.o \
 	  intel_ringbuffer.o \
@@ -48,11 +48,14 @@ i915-y += intel_renderstate_gen6.o \
 
 # modesetting core code
 i915-y += intel_audio.o \
+	  intel_atomic.o \
+	  intel_atomic_plane.o \
 	  intel_bios.o \
 	  intel_display.o \
 	  intel_fbc.o \
 	  intel_fifo_underrun.o \
 	  intel_frontbuffer.o \
+	  intel_hotplug.o \
 	  intel_modes.o \
 	  intel_overlay.o \
 	  intel_psr.o \
@@ -68,15 +71,13 @@ i915-y += dvo_ch7017.o \
 	  dvo_ns2501.o \
 	  dvo_sil164.o \
 	  dvo_tfp410.o \
-	  intel_atomic.o \
-	  intel_atomic_plane.o \
 	  intel_crt.o \
 	  intel_ddi.o \
-	  intel_dp.o \
 	  intel_dp_mst.o \
+	  intel_dp.o \
 	  intel_dsi.o \
-	  intel_dsi_pll.o \
 	  intel_dsi_panel_vbt.o \
+	  intel_dsi_pll.o \
 	  intel_dvo.o \
 	  intel_hdmi.o \
 	  intel_i2c.o \

drivers/gpu/drm/i915/i915_cmd_parser.c

@@ -151,8 +151,8 @@ static const struct drm_i915_cmd_descriptor render_cmds[] = {
 	CMD(  MI_ARB_ON_OFF,                    SMI,    F,  1,      R  ),
 	CMD(  MI_PREDICATE,                     SMI,    F,  1,      S  ),
 	CMD(  MI_TOPOLOGY_FILTER,               SMI,    F,  1,      S  ),
-	CMD(  MI_DISPLAY_FLIP,                  SMI,   !F,  0xFF,   R  ),
 	CMD(  MI_SET_APPID,                     SMI,    F,  1,      S  ),
+	CMD(  MI_DISPLAY_FLIP,                  SMI,   !F,  0xFF,   R  ),
 	CMD(  MI_SET_CONTEXT,                   SMI,   !F,  0xFF,   R  ),
 	CMD(  MI_URB_CLEAR,                     SMI,   !F,  0xFF,   S  ),
 	CMD(  MI_STORE_DWORD_IMM,               SMI,   !F,  0x3F,   B,
@@ -564,7 +564,7 @@ static bool validate_cmds_sorted(struct intel_engine_cs *ring,
 
 		for (j = 0; j < table->count; j++) {
 			const struct drm_i915_cmd_descriptor *desc =
-				&table->table[i];
+				&table->table[j];
 			u32 curr = desc->cmd.value & desc->cmd.mask;
 
 			if (curr < previous) {

drivers/gpu/drm/i915/i915_debugfs.c

@@ -3645,74 +3645,40 @@ static int ilk_pipe_crc_ctl_reg(enum intel_pipe_crc_source *source,
 	return 0;
 }
 
-static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
+static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev, bool enable)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *crtc =
 		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
 	struct intel_crtc_state *pipe_config;
+	struct drm_atomic_state *state;
+	int ret = 0;
 
 	drm_modeset_lock_all(dev);
-	pipe_config = to_intel_crtc_state(crtc->base.state);
-
-	/*
-	 * If we use the eDP transcoder we need to make sure that we don't
-	 * bypass the pfit, since otherwise the pipe CRC source won't work. Only
-	 * relevant on hsw with pipe A when using the always-on power well
-	 * routing.
-	 */
-	if (pipe_config->cpu_transcoder == TRANSCODER_EDP &&
-	    !pipe_config->pch_pfit.enabled) {
-		bool active = pipe_config->base.active;
-
-		if (active) {
-			intel_crtc_control(&crtc->base, false);
-			pipe_config = to_intel_crtc_state(crtc->base.state);
-		}
-
-		pipe_config->pch_pfit.force_thru = true;
-
-		intel_display_power_get(dev_priv,
-					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
-
-		if (active)
-			intel_crtc_control(&crtc->base, true);
+	state = drm_atomic_state_alloc(dev);
+	if (!state) {
+		ret = -ENOMEM;
+		goto out;
 	}
-	drm_modeset_unlock_all(dev);
-}
-
-static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *crtc =
-		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
-	struct intel_crtc_state *pipe_config;
-
-	drm_modeset_lock_all(dev);
-	/*
-	 * If we use the eDP transcoder we need to make sure that we don't
-	 * bypass the pfit, since otherwise the pipe CRC source won't work. Only
-	 * relevant on hsw with pipe A when using the always-on power well
-	 * routing.
-	 */
-	pipe_config = to_intel_crtc_state(crtc->base.state);
-	if (pipe_config->pch_pfit.force_thru) {
-		bool active = pipe_config->base.active;
-
-		if (active) {
-			intel_crtc_control(&crtc->base, false);
-			pipe_config = to_intel_crtc_state(crtc->base.state);
-		}
 
-		pipe_config->pch_pfit.force_thru = false;
+	state->acquire_ctx = drm_modeset_legacy_acquire_ctx(&crtc->base);
+	pipe_config = intel_atomic_get_crtc_state(state, crtc);
+	if (IS_ERR(pipe_config)) {
+		ret = PTR_ERR(pipe_config);
+		goto out;
+	}
 
-		intel_display_power_put(dev_priv,
-					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
+	pipe_config->pch_pfit.force_thru = enable;
+	if (pipe_config->cpu_transcoder == TRANSCODER_EDP &&
+	    pipe_config->pch_pfit.enabled != enable)
+		pipe_config->base.connectors_changed = true;
 
-		if (active)
-			intel_crtc_control(&crtc->base, true);
-	}
+	ret = drm_atomic_commit(state);
+out:
 	drm_modeset_unlock_all(dev);
+	WARN(ret, "Toggling workaround to %i returns %i\n", enable, ret);
+	if (ret)
+		drm_atomic_state_free(state);
 }
 
 static int ivb_pipe_crc_ctl_reg(struct drm_device *dev,
@@ -3732,7 +3698,7 @@ static int ivb_pipe_crc_ctl_reg(struct drm_device *dev,
 		break;
 	case INTEL_PIPE_CRC_SOURCE_PF:
 		if (IS_HASWELL(dev) && pipe == PIPE_A)
-			hsw_trans_edp_pipe_A_crc_wa(dev);
+			hsw_trans_edp_pipe_A_crc_wa(dev, true);
 
 		*val = PIPE_CRC_ENABLE | PIPE_CRC_SOURCE_PF_IVB;
 		break;
@@ -3844,7 +3810,7 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
 		else if (IS_VALLEYVIEW(dev))
 			vlv_undo_pipe_scramble_reset(dev, pipe);
 		else if (IS_HASWELL(dev) && pipe == PIPE_A)
-			hsw_undo_trans_edp_pipe_A_crc_wa(dev);
+			hsw_trans_edp_pipe_A_crc_wa(dev, false);
 
 		hsw_enable_ips(crtc);
 	}
@@ -4030,24 +3996,14 @@ static ssize_t i915_displayport_test_active_write(struct file *file,
 {
 	char *input_buffer;
 	int status = 0;
-	struct seq_file *m;
 	struct drm_device *dev;
 	struct drm_connector *connector;
 	struct list_head *connector_list;
 	struct intel_dp *intel_dp;
 	int val = 0;
 
-	m = file->private_data;
-	if (!m) {
-		status = -ENODEV;
-		return status;
-	}
-	dev = m->private;
+	dev = ((struct seq_file *)file->private_data)->private;
 
-	if (!dev) {
-		status = -ENODEV;
-		return status;
-	}
 	connector_list = &dev->mode_config.connector_list;
 
 	if (len == 0)
@@ -4071,9 +4027,7 @@ static ssize_t i915_displayport_test_active_write(struct file *file,
 		    DRM_MODE_CONNECTOR_DisplayPort)
 			continue;
 
-		if (connector->connector_type ==
-		    DRM_MODE_CONNECTOR_DisplayPort &&
-		    connector->status == connector_status_connected &&
+		if (connector->status == connector_status_connected &&
 		    connector->encoder != NULL) {
 			intel_dp = enc_to_intel_dp(connector->encoder);
 			status = kstrtoint(input_buffer, 10, &val);
@@ -4105,9 +4059,6 @@ static int i915_displayport_test_active_show(struct seq_file *m, void *data)
 	struct list_head *connector_list = &dev->mode_config.connector_list;
 	struct intel_dp *intel_dp;
 
-	if (!dev)
-		return -ENODEV;
-
 	list_for_each_entry(connector, connector_list, head) {
 
 		if (connector->connector_type !=
@@ -4152,9 +4103,6 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
 	struct list_head *connector_list = &dev->mode_config.connector_list;
 	struct intel_dp *intel_dp;
 
-	if (!dev)
-		return -ENODEV;
-
 	list_for_each_entry(connector, connector_list, head) {
 
 		if (connector->connector_type !=
@@ -4194,9 +4142,6 @@ static int i915_displayport_test_type_show(struct seq_file *m, void *data)
 	struct list_head *connector_list = &dev->mode_config.connector_list;
 	struct intel_dp *intel_dp;
 
-	if (!dev)
-		return -ENODEV;
-
 	list_for_each_entry(connector, connector_list, head) {
 
 		if (connector->connector_type !=

drivers/gpu/drm/i915/i915_dma.c

@@ -1274,13 +1274,3 @@ const struct drm_ioctl_desc i915_ioctls[] = {
 };
 
 int i915_max_ioctl = ARRAY_SIZE(i915_ioctls);
-
-/*
- * This is really ugly: Because old userspace abused the linux agp interface to
- * manage the gtt, we need to claim that all intel devices are agp.  For
- * otherwise the drm core refuses to initialize the agp support code.
- */
-int i915_driver_device_is_agp(struct drm_device *dev)
-{
-	return 1;
-}

drivers/gpu/drm/i915/i915_drv.c

@@ -935,8 +935,6 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (PCI_FUNC(pdev->devfn))
 		return -ENODEV;
 
-	driver.driver_features &= ~(DRIVER_USE_AGP);
-
 	return drm_get_pci_dev(pdev, ent, &driver);
 }
 
@@ -1491,7 +1489,15 @@ static int intel_runtime_suspend(struct device *device)
 	 * FIXME: We really should find a document that references the arguments
 	 * used below!
 	 */
-	if (IS_HASWELL(dev)) {
+	if (IS_BROADWELL(dev)) {
+		/*
+		 * On Broadwell, if we use PCI_D1 the PCH DDI ports will stop
+		 * being detected, and the call we do at intel_runtime_resume()
+		 * won't be able to restore them. Since PCI_D3hot matches the
+		 * actual specification and appears to be working, use it.
+		 */
+		intel_opregion_notify_adapter(dev, PCI_D3hot);
+	} else {
 		/*
 		 * current versions of firmware which depend on this opregion
 		 * notification have repurposed the D1 definition to mean
@@ -1500,16 +1506,6 @@ static int intel_runtime_suspend(struct device *device)
 		 * the suspend path.
 		 */
 		intel_opregion_notify_adapter(dev, PCI_D1);
-	} else {
-		/*
-		 * On Broadwell, if we use PCI_D1 the PCH DDI ports will stop
-		 * being detected, and the call we do at intel_runtime_resume()
-		 * won't be able to restore them. Since PCI_D3hot matches the
-		 * actual specification and appears to be working, use it. Let's
-		 * assume the other non-Haswell platforms will stay the same as
-		 * Broadwell.
-		 */
-		intel_opregion_notify_adapter(dev, PCI_D3hot);
 	}
 
 	assert_forcewakes_inactive(dev_priv);
@@ -1649,7 +1645,6 @@ static struct drm_driver driver = {
 	 * deal with them for Intel hardware.
 	 */
 	.driver_features =
-	    DRIVER_USE_AGP |
 	    DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
 	    DRIVER_RENDER,
 	.load = i915_driver_load,
@@ -1664,7 +1659,6 @@ static struct drm_driver driver = {
 	.suspend = i915_suspend_legacy,
 	.resume = i915_resume_legacy,
 
-	.device_is_agp = i915_driver_device_is_agp,
 #if defined(CONFIG_DEBUG_FS)
 	.debugfs_init = i915_debugfs_init,
 	.debugfs_cleanup = i915_debugfs_cleanup,