---

yaml
---
r: 343167
b: refs/heads/master
c: bdb7e45
h: refs/heads/master
i:
  343165: ee107e5
  343163: 51d1bf5
  343159: dfe4d2b
  343151: aa0449a
  343135: 6aaa00e
  343103: 78a23cc
  343039: 3256d75
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: fff15bef48e846d2670c86c95f8dbc3f84bbe866
+refs/heads/master: bdb7e45507893f4c509c539d442ed4962ac6fa0f

trunk/Documentation/devicetree/bindings/regulator/gpio-regulator.txt

@@ -0,0 +1,37 @@
+GPIO controlled regulators
+
+Required properties:
+- compatible		: Must be "regulator-gpio".
+- states		: Selection of available voltages and GPIO configs.
+                          if there are no states, then use a fixed regulator
+
+Optional properties:
+- enable-gpio		: GPIO to use to enable/disable the regulator.
+- gpios			: GPIO group used to control voltage.
+- startup-delay-us	: Startup time in microseconds.
+- enable-active-high	: Polarity of GPIO is active high (default is low).
+
+Any property defined as part of the core regulator binding defined in
+regulator.txt can also be used.
+
+Example:
+
+	mmciv: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "mmci-gpio-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2600000>;
+		regulator-boot-on;
+
+		enable-gpio = <&gpio0 23 0x4>;
+		gpios = <&gpio0 24 0x4
+			 &gpio0 25 0x4>;
+		states = <1800000 0x3
+			  2200000 0x2
+			  2600000 0x1
+			  2900000 0x0>;
+
+		startup-delay-us = <100000>;
+		enable-active-high;
+	};

trunk/Documentation/devicetree/bindings/regulator/max8925-regulator.txt

@@ -0,0 +1,40 @@
+Max8925 Voltage regulators
+
+Required nodes:
+-nodes:
+  - SDV1 for SDV SDV1
+  - SDV2 for SDV SDV2
+  - SDV3 for SDV SDV3
+  - LDO1 for LDO LDO1
+  - LDO2 for LDO LDO2
+  - LDO3 for LDO LDO3
+  - LDO4 for LDO LDO4
+  - LDO5 for LDO LDO5
+  - LDO6 for LDO LDO6
+  - LDO7 for LDO LDO7
+  - LDO8 for LDO LDO8
+  - LDO9 for LDO LDO9
+  - LDO10 for LDO LDO10
+  - LDO11 for LDO LDO11
+  - LDO12 for LDO LDO12
+  - LDO13 for LDO LDO13
+  - LDO14 for LDO LDO14
+  - LDO15 for LDO LDO15
+  - LDO16 for LDO LDO16
+  - LDO17 for LDO LDO17
+  - LDO18 for LDO LDO18
+  - LDO19 for LDO LDO19
+  - LDO20 for LDO LDO20
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+	SDV1 {
+		regulator-min-microvolt = <637500>;
+		regulator-max-microvolt = <1425000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+

trunk/Documentation/devicetree/bindings/regulator/vexpress.txt

@@ -0,0 +1,32 @@
+Versatile Express voltage regulators
+------------------------------------
+
+Requires node properties:
+- "compatible" value: "arm,vexpress-volt"
+- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
+  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  for more details)
+
+Required regulator properties:
+- "regulator-name"
+- "regulator-always-on"
+
+Optional regulator properties:
+- "regulator-min-microvolt"
+- "regulator-max-microvolt"
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+When no "regulator-[min|max]-microvolt" properties are defined,
+the device is treated as fixed (or rather "read-only") regulator.
+
+Example:
+	volt@0 {
+		compatible = "arm,vexpress-volt";
+		arm,vexpress-sysreg,func = <2 0>;
+		regulator-name = "Cores";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
+	};

trunk/drivers/mfd/Kconfig

@@ -201,7 +201,6 @@ config MFD_TPS6586X
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
-	depends on REGULATOR
 	help
 	  If you say yes here you get support for the TPS6586X series of
 	  Power Management chips.

trunk/drivers/mfd/tps6586x.c

@@ -24,8 +24,6 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
-#include <linux/regulator/of_regulator.h>
-#include <linux/regulator/machine.h>
 
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6586x.h>
@@ -98,6 +96,9 @@ static struct mfd_cell tps6586x_cell[] = {
 	{
 		.name = "tps6586x-gpio",
 	},
+	{
+		.name = "tps6586x-pmic",
+	},
 	{
 		.name = "tps6586x-rtc",
 	},
@@ -350,80 +351,19 @@ static int __devinit tps6586x_add_subdevs(struct tps6586x *tps6586x,
 }
 
 #ifdef CONFIG_OF
-static struct of_regulator_match tps6586x_matches[] = {
-	{ .name = "sys",     .driver_data = (void *)TPS6586X_ID_SYS     },
-	{ .name = "sm0",     .driver_data = (void *)TPS6586X_ID_SM_0    },
-	{ .name = "sm1",     .driver_data = (void *)TPS6586X_ID_SM_1    },
-	{ .name = "sm2",     .driver_data = (void *)TPS6586X_ID_SM_2    },
-	{ .name = "ldo0",    .driver_data = (void *)TPS6586X_ID_LDO_0   },
-	{ .name = "ldo1",    .driver_data = (void *)TPS6586X_ID_LDO_1   },
-	{ .name = "ldo2",    .driver_data = (void *)TPS6586X_ID_LDO_2   },
-	{ .name = "ldo3",    .driver_data = (void *)TPS6586X_ID_LDO_3   },
-	{ .name = "ldo4",    .driver_data = (void *)TPS6586X_ID_LDO_4   },
-	{ .name = "ldo5",    .driver_data = (void *)TPS6586X_ID_LDO_5   },
-	{ .name = "ldo6",    .driver_data = (void *)TPS6586X_ID_LDO_6   },
-	{ .name = "ldo7",    .driver_data = (void *)TPS6586X_ID_LDO_7   },
-	{ .name = "ldo8",    .driver_data = (void *)TPS6586X_ID_LDO_8   },
-	{ .name = "ldo9",    .driver_data = (void *)TPS6586X_ID_LDO_9   },
-	{ .name = "ldo_rtc", .driver_data = (void *)TPS6586X_ID_LDO_RTC },
-};
-
 static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *client)
 {
-	const unsigned int num = ARRAY_SIZE(tps6586x_matches);
 	struct device_node *np = client->dev.of_node;
 	struct tps6586x_platform_data *pdata;
-	struct tps6586x_subdev_info *devs;
-	struct device_node *regs;
-	const char *sys_rail_name = NULL;
-	unsigned int count;
-	unsigned int i, j;
-	int err;
-
-	regs = of_find_node_by_name(np, "regulators");
-	if (!regs)
-		return NULL;
-
-	err = of_regulator_match(&client->dev, regs, tps6586x_matches, num);
-	if (err < 0) {
-		of_node_put(regs);
-		return NULL;
-	}
-
-	of_node_put(regs);
-	count = err;
-
-	devs = devm_kzalloc(&client->dev, count * sizeof(*devs), GFP_KERNEL);
-	if (!devs)
-		return NULL;
-
-	for (i = 0, j = 0; i < num && j < count; i++) {
-		struct regulator_init_data *reg_idata;
-
-		if (!tps6586x_matches[i].init_data)
-			continue;
-
-		reg_idata  = tps6586x_matches[i].init_data;
-		devs[j].name = "tps6586x-regulator";
-		devs[j].platform_data = tps6586x_matches[i].init_data;
-		devs[j].id = (int)tps6586x_matches[i].driver_data;
-		if (devs[j].id == TPS6586X_ID_SYS)
-			sys_rail_name = reg_idata->constraints.name;
-
-		if ((devs[j].id == TPS6586X_ID_LDO_5) ||
-			(devs[j].id == TPS6586X_ID_LDO_RTC))
-			reg_idata->supply_regulator = sys_rail_name;
-
-		devs[j].of_node = tps6586x_matches[i].of_node;
-		j++;
-	}
 
 	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
+	if (!pdata) {
+		dev_err(&client->dev, "Memory allocation failed\n");
 		return NULL;
+	}
 
-	pdata->num_subdevs = count;
-	pdata->subdevs = devs;
+	pdata->num_subdevs = 0;
+	pdata->subdevs = NULL;
 	pdata->gpio_base = -1;
 	pdata->irq_base = -1;
 	pdata->pm_off = of_property_read_bool(np, "ti,system-power-controller");

trunk/drivers/mfd/wm5102-tables.c

@@ -775,6 +775,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000154, 0x0000 },   /* R340   - Rate Estimator 3 */ 
 	{ 0x00000155, 0x0000 },   /* R341   - Rate Estimator 4 */ 
 	{ 0x00000156, 0x0000 },   /* R342   - Rate Estimator 5 */ 
+	{ 0x00000161, 0x0000 },   /* R353   - Dynamic Frequency Scaling 1 */ 
 	{ 0x00000171, 0x0000 },   /* R369   - FLL1 Control 1 */ 
 	{ 0x00000172, 0x0008 },   /* R370   - FLL1 Control 2 */ 
 	{ 0x00000173, 0x0018 },   /* R371   - FLL1 Control 3 */ 
@@ -1564,6 +1565,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_RATE_ESTIMATOR_3:
 	case ARIZONA_RATE_ESTIMATOR_4:
 	case ARIZONA_RATE_ESTIMATOR_5:
+	case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1:
 	case ARIZONA_FLL1_CONTROL_1:
 	case ARIZONA_FLL1_CONTROL_2:
 	case ARIZONA_FLL1_CONTROL_3:
@@ -1596,6 +1598,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_GPIO_CLOCK:
 	case ARIZONA_MIC_CHARGE_PUMP_1:
 	case ARIZONA_LDO1_CONTROL_1:
+	case ARIZONA_LDO1_CONTROL_2:
 	case ARIZONA_LDO2_CONTROL_1:
 	case ARIZONA_MIC_BIAS_CTRL_1:
 	case ARIZONA_MIC_BIAS_CTRL_2:

trunk/drivers/regulator/88pm8607.c

@@ -394,7 +394,7 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev,
 #define pm8607_regulator_dt_init(x, y, z)	(-1)
 #endif
 
-static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
+static int pm8607_regulator_probe(struct platform_device *pdev)
 {
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct pm8607_regulator_info *info = NULL;
@@ -454,7 +454,7 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit pm8607_regulator_remove(struct platform_device *pdev)
+static int pm8607_regulator_remove(struct platform_device *pdev)
 {
 	struct pm8607_regulator_info *info = platform_get_drvdata(pdev);
 
@@ -481,7 +481,7 @@ static struct platform_driver pm8607_regulator_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= pm8607_regulator_probe,
-	.remove		= __devexit_p(pm8607_regulator_remove),
+	.remove		= pm8607_regulator_remove,
 	.id_table	= pm8607_regulator_driver_ids,
 };
 

trunk/drivers/regulator/Kconfig

@@ -109,6 +109,16 @@ config REGULATOR_DA9052
 	  This driver supports the voltage regulators of DA9052-BC and
 	  DA9053-AA/Bx PMIC.
 
+config REGULATOR_DA9055
+	tristate "Dialog Semiconductor DA9055 regulators"
+	depends on MFD_DA9055
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  Dialog Semiconductor DA9055 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9055-regulator.
+
 config REGULATOR_FAN53555
 	tristate "Fairchild FAN53555 Regulator"
 	depends on I2C
@@ -335,6 +345,17 @@ config REGULATOR_PALMAS
 	  on the muxing. This is handled automatically in the driver by
 	  reading the mux info from OTP.
 
+config REGULATOR_TPS51632
+	tristate "TI TPS51632 Power Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports TPS51632 voltage regulator chip.
+	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
+	  with Serial VID control and DVFS.
+	  The voltage output can be configure through I2C interface or PWM
+	  interface.
+
 config REGULATOR_TPS6105X
 	tristate "TI TPS6105X Power regulators"
 	depends on TPS6105X
@@ -415,13 +436,29 @@ config REGULATOR_TPS65912
 	help
 	    This driver supports TPS65912 voltage regulator chip.
 
+config REGULATOR_TPS80031
+	tristate "TI TPS80031/TPS80032 power regualtor driver"
+	depends on MFD_TPS80031
+	help
+	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
+	  Path and Battery Charger. It has 5 configurable step-down
+	  converters, 11 general purpose LDOs, VBUS generator and digital
+	  output to control regulators.
+
 config REGULATOR_TWL4030
 	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
 	depends on TWL4030_CORE
 	help
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_VEXPRESS
+	tristate "Versatile Express regulators"
+	depends on VEXPRESS_CONFIG
+	help
+	  This driver provides support for voltage regulators available
+	  on the ARM Ltd's Versatile Express platform.
+
 config REGULATOR_WM831X
 	tristate "Wolfson Microelectronics WM831x PMIC regulators"
 	depends on MFD_WM831X
@@ -450,5 +487,12 @@ config REGULATOR_WM8994
 	  This driver provides support for the voltage regulators on the
 	  WM8994 CODEC.
 
+config REGULATOR_AS3711
+	tristate "AS3711 PMIC"
+	depends on MFD_AS3711
+	help
+	  This driver provides support for the voltage regulators on the
+	  AS3711 PMIC
+
 endif
 

trunk/drivers/regulator/Makefile

@@ -16,8 +16,10 @@ obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
+obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
+obj-$(CONFIG_REGULATOR_DA9055)	+= da9055-regulator.o
 obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
 obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
 obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
@@ -41,6 +43,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
+obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
@@ -56,7 +59,9 @@ obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
+obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
+obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o