---

yaml
---
r: 370679
b: refs/heads/master
c: 3a768d0
h: refs/heads/master
i:
  370677: c4c6c1b
  370675: 86363d2
  370671: d5b549e
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: bcf3e72eff584136600a51a5b30ef7a794664d19
+refs/heads/master: 3a768d04639307dbebbbbc8f4216e3a06bc602d7

trunk/arch/arm/Kconfig

@@ -382,17 +382,6 @@ config ARCH_BCM2835
 	  This enables support for the Broadcom BCM2835 SoC. This SoC is
 	  use in the Raspberry Pi, and Roku 2 devices.
 
-config ARCH_CNS3XXX
-	bool "Cavium Networks CNS3XXX family"
-	select ARM_GIC
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_CACHE_L2X0
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
-	help
-	  Support for Cavium Networks CNS3XXX platform.
-
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
@@ -916,27 +905,6 @@ config ARCH_U8500
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
-config ARCH_NOMADIK
-	bool "STMicroelectronics Nomadik"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_VIC
-	select CLKSRC_NOMADIK_MTU
-	select COMMON_CLK
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_CACHE_L2X0
-	select USE_OF
-	select PINCTRL
-	select PINCTRL_STN8815
-	select SPARSE_IRQ
-	help
-	  Support for the Nomadik platform by ST-Ericsson
-
-config PLAT_SPEAR_SINGLE
-	bool "ST SPEAr"
-	help
-	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
 
 config ARCH_DAVINCI
 	bool "TI DaVinci"

trunk/arch/arm/Kconfig.debug

@@ -103,6 +103,13 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_CNS3XXX
+		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
+		depends on ARCH_CNS3XXX
+		help
+		  Say Y here if you want the debug print routines to direct
+                  their output to the CNS3xxx UART0.
+
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -298,6 +305,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MVEBU based platforms.
 
+	config DEBUG_NOMADIK_UART
+		bool "Kernel low-level debugging messages via NOMADIK UART"
+		depends on ARCH_NOMADIK
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on NOMADIK based platforms.
+
 	config DEBUG_OMAP2PLUS_UART
 		bool "Kernel low-level debugging messages via OMAP2PLUS UART"
 		depends on ARCH_OMAP2PLUS
@@ -579,6 +593,7 @@ endchoice
 
 config DEBUG_LL_INCLUDE
 	string
+	default "debug/cns3xxx.S" if DEBUG_CNS3XXX
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
@@ -590,6 +605,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6Q_UART
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
+	default "debug/nomadik.S" if DEBUG_NOMADIK_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART

trunk/arch/arm/configs/cns3420vb_defconfig

@@ -19,8 +19,11 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_IOSCHED_CFQ=m
+CONFIG_ARCH_MULTI_V6=y
+#CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_CNS3XXX=y
 CONFIG_MACH_CNS3420VB=y
+CONFIG_DEBUG_CNS3XXX=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0

trunk/arch/arm/configs/nhk8815_defconfig

@@ -1,26 +1,24 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_NOMADIK=y
 CONFIG_MACH_NOMADIK_8815NHK=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -32,14 +30,10 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
@@ -53,14 +47,16 @@ CONFIG_BT_HCIVHCI=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSMC=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -72,60 +68,60 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=m
 CONFIG_TUN=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-CONFIG_NETCONSOLE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_NOMADIK=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_GPIO=y
+CONFIG_I2C_NOMADIK=y
 CONFIG_DEBUG_GPIO=y
-CONFIG_PINCTRL_NOMADIK=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_ARMMMCI=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
 CONFIG_FUSE_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
-CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_DES=y

trunk/arch/arm/mach-cns3xxx/Kconfig

@@ -1,8 +1,20 @@
+config ARCH_CNS3XXX
+	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
+	select ARM_GIC
+	select CPU_V6K
+	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
+	help
+	  Support for Cavium Networks CNS3XXX platform.
+
 menu "CNS3XXX platform type"
 	depends on ARCH_CNS3XXX
 
 config MACH_CNS3420VB
 	bool "Support for CNS3420 Validation Board"
+	depends on ATAGS
 	help
 	  Include support for the Cavium Networks CNS3420 MPCore Platform
 	  Baseboard.

trunk/arch/arm/mach-cns3xxx/Makefile

@@ -1,3 +1,5 @@
-obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o devices.o
-obj-$(CONFIG_PCI)			+= pcie.o
-obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
+obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
+cns3xxx-y				+= core.o pm.o
+cns3xxx-$(CONFIG_ATAGS)			+= devices.o
+cns3xxx-$(CONFIG_PCI)			+= pcie.o
+cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o

trunk/arch/arm/mach-cns3xxx/cns3420vb.c

@@ -31,9 +31,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/cns3xxx.h>
-#include <mach/irqs.h>
-#include <mach/pm.h>
+#include "cns3xxx.h"
+#include "pm.h"
 #include "core.h"
 #include "devices.h"
 
@@ -247,6 +246,7 @@ static void __init cns3420_map_io(void)
 
 MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_CNS3XXX,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.init_time	= cns3xxx_timer_init,

trunk/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h → trunk/arch/arm/mach-cns3xxx/cns3xxx.h

@@ -553,6 +553,8 @@ int cns3xxx_cpu_clock(void);
 /*
  * ARM11 MPCore interrupt sources (primary GIC)
  */
+#define IRQ_TC11MP_GIC_START	32
+
 #define IRQ_CNS3XXX_PMU			(IRQ_TC11MP_GIC_START + 0)
 #define IRQ_CNS3XXX_SDIO		(IRQ_TC11MP_GIC_START + 1)
 #define IRQ_CNS3XXX_L2CC		(IRQ_TC11MP_GIC_START + 2)
@@ -624,9 +626,4 @@ int cns3xxx_cpu_clock(void);
 
 #define NR_IRQS_CNS3XXX			(IRQ_TC11MP_GIC_START + 64)
 
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX)
-#undef NR_IRQS
-#define NR_IRQS				NR_IRQS_CNS3XXX
-#endif
-
 #endif	/* __MACH_BOARD_CNS3XXX_H */