---

yaml --- r: 316601 b: refs/heads/master c: 395e51f h: refs/heads/master i: 316599: 8e20c29 v: v3
git-mirror · Jul 23, 2012 · d3949d5 · d3949d5
1 parent 09f1ae8
commit d3949d5
Show file tree

Hide file tree

Showing 383 changed files with 5,126 additions and 2,778 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3177bb76a8c510cbc737425a74e777a9aa253065
+refs/heads/master: 395e51f18d3b26619c1c462b7a1c0226846ac0a9
diff --git a/trunk/Documentation/ABI/testing/sysfs-class-mtd b/trunk/Documentation/ABI/testing/sysfs-class-mtd
@@ -142,13 +142,14 @@ KernelVersion:	3.4
 Contact:	linux-mtd@lists.infradead.org
 Description:
 		This allows the user to examine and adjust the criteria by which
-		mtd returns -EUCLEAN from mtd_read().  If the maximum number of
-		bit errors that were corrected on any single region comprising
-		an ecc step (as reported by the driver) equals or exceeds this
-		value, -EUCLEAN is returned.  Otherwise, absent an error, 0 is
-		returned.  Higher layers (e.g., UBI) use this return code as an
-		indication that an erase block may be degrading and should be
-		scrutinized as a candidate for being marked as bad.
+		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
+		maximum number of bit errors that were corrected on any single
+		region comprising an ecc step (as reported by the driver) equals
+		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
+		an error, 0 is returned.  Higher layers (e.g., UBI) use this
+		return code as an indication that an erase block may be
+		degrading and should be scrutinized as a candidate for being
+		marked as bad.
 
 		The initial value may be specified by the flash device driver.
 		If not, then the default value is ecc_strength.
@@ -167,7 +168,7 @@ Description:
 		block degradation, but high enough to avoid the consequences of
 		a persistent return value of -EUCLEAN on devices where sticky
 		bitflips occur.  Note that if bitflip_threshold exceeds
-		ecc_strength, -EUCLEAN is never returned by mtd_read().
+		ecc_strength, -EUCLEAN is never returned by the read operations.
 		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
 		returned, absent a hard error.
 

diff --git a/trunk/Documentation/ABI/testing/sysfs-kernel-iommu_groups b/trunk/Documentation/ABI/testing/sysfs-kernel-iommu_groups
@@ -0,0 +1,14 @@
+What:		/sys/kernel/iommu_groups/
+Date:		May 2012
+KernelVersion:	v3.5
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:	/sys/kernel/iommu_groups/ contains a number of sub-
+		directories, each representing an IOMMU group.  The
+		name of the sub-directory matches the iommu_group_id()
+		for the group, which is an integer value.  Within each
+		subdirectory is another directory named "devices" with
+		links to the sysfs devices contained in this group.
+		The group directory also optionally contains a "name"
+		file if the IOMMU driver has chosen to register a more
+		common name for the group.
+Users:
diff --git a/trunk/Documentation/DocBook/media/v4l/controls.xml b/trunk/Documentation/DocBook/media/v4l/controls.xml
@@ -3988,7 +3988,7 @@ interface and may change in the future.</para>
 	    from RGB to Y'CbCr color space.
 	    </entry>
 	  </row>
-	  <row id = "v4l2-jpeg-chroma-subsampling">
+	  <row>
 	    <entrytbl spanname="descr" cols="2">
 	      <tbody valign="top">
 		<row>

diff --git a/trunk/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/trunk/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -284,13 +284,6 @@ These controls are described in <xref
 	    processing controls. These controls are described in <xref
 	    linkend="image-process-controls" />.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
-	    <entry>0x9d0000</entry>
-	    <entry>The class containing JPEG compression controls.
-These controls are described in <xref
-		linkend="jpeg-controls" />.</entry>
-	  </row>
 	</tbody>
       </tgroup>
     </table>

diff --git a/trunk/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt b/trunk/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt
@@ -0,0 +1,21 @@
+NVIDIA Tegra 30 IOMMU H/W, SMMU (System Memory Management Unit)
+
+Required properties:
+- compatible : "nvidia,tegra30-smmu"
+- reg : Should contain 3 register banks(address and length) for each
+  of the SMMU register blocks.
+- interrupts : Should contain MC General interrupt.
+- nvidia,#asids : # of ASIDs
+- dma-window : IOVA start address and length.
+- nvidia,ahb : phandle to the ahb bus connected to SMMU.
+
+Example:
+	smmu {
+		compatible = "nvidia,tegra30-smmu";
+		reg = <0x7000f010 0x02c
+		       0x7000f1f0 0x010
+		       0x7000f228 0x05c>;
+		nvidia,#asids = <4>;		/* # of ASIDs */
+		dma-window = <0 0x40000000>;	/* IOVA start & length */
+		nvidia,ahb = <&ahb>;
+	};
diff --git a/trunk/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/trunk/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
@@ -1626,3 +1626,5 @@ MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11		1587
 MX6Q_PAD_SD2_DAT3__GPIO_1_12			1588
 MX6Q_PAD_SD2_DAT3__SJC_DONE			1589
 MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3		1590
+MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID		1591
+MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID		1592
diff --git a/trunk/Documentation/kdump/kdump.txt b/trunk/Documentation/kdump/kdump.txt
@@ -86,7 +86,7 @@ There is also a gitweb interface available at
 http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
 
 More information about kexec-tools can be found at
-http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html
+http://horms.net/projects/kexec/
 
 3) Unpack the tarball with the tar command, as follows:
 

diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -1134,7 +1134,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		forcesac
 		soft
 		pt		[x86, IA-64]
-		group_mf	[x86, IA-64]
 
 
 	io7=		[HW] IO7 for Marvel based alpha systems

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -3433,13 +3433,14 @@ S:	Supported
 F:	drivers/idle/i7300_idle.c
 
 IEEE 802.15.4 SUBSYSTEM
+M:	Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
 M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://apps.sourceforge.net/trac/linux-zigbee
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
 F:	net/ieee802154/
+F:	net/mac802154/
 F:	drivers/ieee802154/
 
 IIO SUBSYSTEM AND DRIVERS
@@ -4857,6 +4858,7 @@ M:	Kevin Hilman <khilman@ti.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*pm*
+F:	drivers/cpufreq/omap-cpufreq.c
 
 OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT
 M:	Rajendra Nayak <rnayak@ti.com>
@@ -5563,15 +5565,14 @@ F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	Anirban Chakraborty <anirban.chakraborty@qlogic.com>
+M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
 M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-M:	Anirban Chakraborty <anirban.chakraborty@qlogic.com>
 M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
 M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
@@ -5909,7 +5910,7 @@ M:	Ingo Molnar <mingo@redhat.com>
 M:	Peter Zijlstra <peterz@infradead.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
-F:	kernel/sched*
+F:	kernel/sched/
 F:	include/linux/sched.h
 
 SCORE ARCHITECTURE

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION =
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

diff --git a/trunk/arch/arm/boot/dts/spear13xx.dtsi b/trunk/arch/arm/boot/dts/spear13xx.dtsi
@@ -43,8 +43,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 8 0x04
-			      0 9 0x04>;
+		interrupts = <0 6 0x04
+			      0 7 0x04>;
 	};
 
 	L2: l2-cache {
@@ -119,8 +119,8 @@
 		gmac0: eth@e2000000 {
 			compatible = "st,spear600-gmac";
 			reg = <0xe2000000 0x8000>;
-			interrupts = <0 23 0x4
-				      0 24 0x4>;
+			interrupts = <0 33 0x4
+				      0 34 0x4>;
 			interrupt-names = "macirq", "eth_wake_irq";
 			status = "disabled";
 		};
@@ -202,6 +202,7 @@
 			kbd@e0300000 {
 				compatible = "st,spear300-kbd";
 				reg = <0xe0300000 0x1000>;
+				interrupts = <0 52 0x4>;
 				status = "disabled";
 			};
 
@@ -224,7 +225,7 @@
 			serial@e0000000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xe0000000 0x1000>;
-				interrupts = <0 36 0x4>;
+				interrupts = <0 35 0x4>;
 				status = "disabled";
 			};
 

diff --git a/trunk/arch/arm/boot/dts/spear320-evb.dts b/trunk/arch/arm/boot/dts/spear320-evb.dts
@@ -15,8 +15,8 @@
 /include/ "spear320.dtsi"
 
 / {
-	model = "ST SPEAr300 Evaluation Board";
-	compatible = "st,spear300-evb", "st,spear300";
+	model = "ST SPEAr320 Evaluation Board";
+	compatible = "st,spear320-evb", "st,spear320";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -26,7 +26,7 @@
 
 	ahb {
 		pinmux@b3000000 {
-			st,pinmux-mode = <3>;
+			st,pinmux-mode = <4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
 

diff --git a/trunk/arch/arm/boot/dts/spear600.dtsi b/trunk/arch/arm/boot/dts/spear600.dtsi
@@ -181,6 +181,7 @@
 			timer@f0000000 {
 				compatible = "st,spear-timer";
 				reg = <0xf0000000 0x400>;
+				interrupt-parent = <&vic0>;
 				interrupts = <16>;
 			};
 		};

diff --git a/trunk/arch/arm/configs/omap2plus_defconfig b/trunk/arch/arm/configs/omap2plus_defconfig
@@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_LIBUSUAL=y

diff --git a/trunk/arch/arm/mach-exynos/pm_domains.c b/trunk/arch/arm/mach-exynos/pm_domains.c
@@ -119,7 +119,9 @@ static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
 						struct exynos_pm_domain *pd)
 {
 	if (pdev->dev.bus) {
-		if (pm_genpd_add_device(&pd->pd, &pdev->dev))
+		if (!pm_genpd_add_device(&pd->pd, &pdev->dev))
+			pm_genpd_dev_need_restore(&pdev->dev, true);
+		else
 			pr_info("%s: error in adding %s device to %s power"
 				"domain\n", __func__, dev_name(&pdev->dev),
 				pd->name);
@@ -151,9 +153,12 @@ static __init int exynos4_pm_init_power_domain(void)
 	if (of_have_populated_dt())
 		return exynos_pm_dt_parse_domains();
 
-	for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
-		pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
-				exynos4_pm_domains[idx]->is_off);
+	for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) {
+		struct exynos_pm_domain *pd = exynos4_pm_domains[idx];
+		int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+
+		pm_genpd_init(&pd->pd, NULL, !on);
+	}
 
 #ifdef CONFIG_S5P_DEV_FIMD0
 	exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);

diff --git a/trunk/arch/arm/mach-omap2/clockdomain.h b/trunk/arch/arm/mach-omap2/clockdomain.h
@@ -31,12 +31,16 @@
  *
  * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
  *     clockdomain.  (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ *     active whenever the MPU is active.  True for interconnects and
+ *     the WKUP clockdomains.
  */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
 #define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
 #define CLKDM_CAN_ENABLE_AUTO			(1 << 2)
 #define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
 #define CLKDM_NO_AUTODEPS			(1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)

diff --git a/trunk/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/trunk/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = {
 	.name		= "wkup_clkdm",
 	.pwrdm		= { .name = "wkup_pwrdm" },
 	.dep_bit	= OMAP_EN_WKUP_SHIFT,
+	.flags		= CLKDM_ACTIVE_WITH_MPU,
 };
diff --git a/trunk/arch/arm/mach-omap2/clockdomains44xx_data.c b/trunk/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = {
 	.cm_inst	  = OMAP4430_PRM_WKUP_CM_INST,
 	.clkdm_offs	  = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
 	.dep_bit	  = OMAP4430_L4WKUP_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP,
+	.flags		  = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
 };
 
 static struct clockdomain emu_sys_44xx_clkdm = {

diff --git a/trunk/arch/arm/mach-omap2/omap_hwmod.c b/trunk/arch/arm/mach-omap2/omap_hwmod.c
@@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap
  * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle.  If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby.  No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes.  No return value.
  */
 static void _enable_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
+	bool clkdm_act;
 
 	if (!oh->class->sysc)
 		return;
@@ -1141,8 +1144,16 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	sf = oh->class->sysc->sysc_flags;
 
 	if (sf & SYSC_HAS_SIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		clkdm_act = ((oh->clkdm &&
+			      oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+			     (oh->_clk && oh->_clk->clkdm &&
+			      oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+		if (clkdm_act && !(oh->class->sysc->idlemodes &
+				   (SIDLE_SMART | SIDLE_SMART_WKUP)))
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
+			idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+				HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 
@@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	sf = oh->class->sysc->sysc_flags;
 
 	if (sf & SYSC_HAS_SIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		/* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+		if (oh->flags & HWMOD_SWSUP_SIDLE ||
+		    !(oh->class->sysc->idlemodes &
+		      (SIDLE_SMART | SIDLE_SMART_WKUP)))
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
+			idlemode = HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 

diff --git a/trunk/arch/arm/mach-s3c24xx/clock-s3c2440.c b/trunk/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -106,7 +106,7 @@ static struct clk s3c2440_clk_cam_upll = {
 static struct clk s3c2440_clk_ac97 = {
 	.name		= "ac97",
 	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+	.ctrlbit	= S3C2440_CLKCON_AC97,
 };
 
 static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)

diff --git a/trunk/arch/arm/mach-shmobile/platsmp.c b/trunk/arch/arm/mach-shmobile/platsmp.c
@@ -22,8 +22,13 @@
 #include <mach/common.h>
 #include <mach/emev2.h>
 
+#ifdef CONFIG_ARCH_SH73A0
 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
 			of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
 #define is_r8a7779() machine_is_marzen()
 
 #ifdef CONFIG_ARCH_EMEV2