---

yaml
---
r: 56032
b: refs/heads/master
c: b7cc4a8
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0c4ea957c6ec953d84cc07346437abe0ae4bb57d
+refs/heads/master: b7cc4a879c4fed0adea23e9931d7b1944d103d2b

trunk/Documentation/SubmitChecklist

@@ -73,9 +73,9 @@ kernel patches.
     If the new code is substantial, addition of subsystem-specific fault
     injection might be appropriate.
 
-22: Newly-added code has been compiled with `gcc -W' (use "make
-    EXTRA_CFLAGS=-W").  This will generate lots of noise, but is good for
-    finding bugs like "warning: comparison between signed and unsigned".
+22: Newly-added code has been compiled with `gcc -W'.  This will generate
+    lots of noise, but is good for finding bugs like "warning: comparison
+    between signed and unsigned".
 
 23: Tested after it has been merged into the -mm patchset to make sure
     that it still works with all of the other queued patches and various

trunk/Documentation/gpio.txt

@@ -66,9 +66,7 @@ registers; another might implement it by delegating through abstractions
 used for several very different kinds of GPIO controller.
 
 That said, if the convention is supported on their platform, drivers should
-use it when possible.  Platforms should declare GENERIC_GPIO support in
-Kconfig (boolean true), which multi-platform drivers can depend on when
-using the include file:
+use it when possible:
 
 	#include <asm/gpio.h>
 

trunk/Documentation/kref.txt

@@ -67,7 +67,7 @@ void more_data_handling(void *cb_data)
 	.
 	. do stuff with data here
 	.
-	kref_put(data, data_release);
+	kref_put(&data->refcount, data_release);
 }
 
 int my_data_handler(void)

trunk/Documentation/mips/pci/pci.README

@@ -0,0 +1,54 @@
+
+Pete Popov, ppopov@pacbell.net
+07/11/2001
+
+This README briefly explains how to use the pci and pci_auto
+code in arch/mips/kernel.  The code was ported from PowerPC and
+modified slightly. It has been tested pretty well on PPC on some
+rather complex systems with multiple bridges and devices behind
+each bridge. However, at the time this README was written, the
+mips port was tested only on boards with a single pci bus and
+no P2P bridges.  It's very possible that on boards with P2P
+bridges some modifications have to be made. The code will 
+evolve, no doubt, but currently every single mips board
+is doing its own pcibios thing and it has become a big
+mess.  This generic pci code is meant to clean up the mips
+pci mess and make it easier to add pci support to new boards.
+
+inside the define for your board in arch/mips/config.in. 
+For example, the Galileo EV96100 board  looks like this:
+
+if [ "$CONFIG_MIPS_EV96100" = "y" ]; then
+	define_bool CONFIG_PCI y
+	define_bool CONFIG_MIPS_GT96100 y
+	define_bool CONFIG_NEW_PCI y
+	define_bool CONFIG_SWAP_IO_SPACE y
+fi 
+
+
+Next, if you want to use the arch/mips/kernel/pci code, which has the
+pcibios_init() function, add
+
+define_bool CONFIG_NEW_PCI y
+
+inside the define for your board. Again, the EV96100 example above
+show NEW_PCI turned on.
+
+
+Now you need to add your files to hook in your pci configuration
+cycles.  Usually you'll need only a couple of files named something
+like pci_fixups.c and pci_ops.c.  You can copy the templates
+provided and fill in the code.
+
+The file pci_ops.c should contain the pci configuration cycles routines.
+It also has the mips_pci_channels[] array which contains the descriptors
+of each pci controller.
+
+The file pci_fixups.c contains a few routines to do interrupt fixups,
+resources fixups, and, if needed, pci bios fixups.
+
+Usually you'll put your pci_fixups.c file in your board specific directory, 
+since the functions in that file are board specific.  The functions in
+pci_ops.c, on the other hand, are usually pci controller specific so that
+file could be shared among a few different boards using the same
+pci controller.

trunk/arch/frv/kernel/gdb-stub.c

@@ -1195,7 +1195,7 @@ static void gdbstub_check_breakpoint(void)
 /*
  *
  */
-static void __maybe_unused gdbstub_show_regs(void)
+static void __attribute__((unused)) gdbstub_show_regs(void)
 {
 	unsigned long *reg;
 	int loop;
@@ -1223,7 +1223,7 @@ static void __maybe_unused gdbstub_show_regs(void)
 /*
  * dump debugging regs
  */
-static void __maybe_unused gdbstub_dump_debugregs(void)
+static void __attribute__((unused)) gdbstub_dump_debugregs(void)
 {
 	gdbstub_printk("DCR    %08lx  ", __debug_status.dcr);
 	gdbstub_printk("BRR    %08lx\n", __debug_status.brr);
@@ -2079,25 +2079,25 @@ void gdbstub_exit(int status)
  * GDB wants to call malloc() and free() to allocate memory for calling kernel
  * functions directly from its command line
  */
-static void *malloc(size_t size) __maybe_unused;
+static void *malloc(size_t size) __attribute__((unused));
 static void *malloc(size_t size)
 {
 	return kmalloc(size, GFP_ATOMIC);
 }
 
-static void free(void *p) __maybe_unused;
+static void free(void *p) __attribute__((unused));
 static void free(void *p)
 {
 	kfree(p);
 }
 
-static uint32_t ___get_HSR0(void) __maybe_unused;
+static uint32_t ___get_HSR0(void) __attribute__((unused));
 static uint32_t ___get_HSR0(void)
 {
 	return __get_HSR(0);
 }
 
-static uint32_t ___set_HSR0(uint32_t x) __maybe_unused;
+static uint32_t ___set_HSR0(uint32_t x) __attribute__((unused));
 static uint32_t ___set_HSR0(uint32_t x)
 {
 	__set_HSR(0, x);

trunk/arch/h8300/kernel/syscalls.S

@@ -31,7 +31,7 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_mknod)
 	.long SYMBOL_NAME(sys_chmod)		/* 15 */
 	.long SYMBOL_NAME(sys_chown16)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* old break syscall holder */
+	.long SYMBOL_NAME(sys_ni_syscall)				/* old break syscall holder */
 	.long SYMBOL_NAME(sys_stat)
 	.long SYMBOL_NAME(sys_lseek)
 	.long SYMBOL_NAME(sys_getpid)		/* 20 */
@@ -45,11 +45,11 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_fstat)
 	.long SYMBOL_NAME(sys_pause)
 	.long SYMBOL_NAME(sys_utime)		/* 30 */
-	.long SYMBOL_NAME(sys_ni_syscall)	/* old stty syscall holder */
-	.long SYMBOL_NAME(sys_ni_syscall)	/* old gtty syscall holder */
+	.long SYMBOL_NAME(sys_ni_syscall)				/* old stty syscall holder */
+	.long SYMBOL_NAME(sys_ni_syscall)				/* old gtty syscall holder */
 	.long SYMBOL_NAME(sys_access)
 	.long SYMBOL_NAME(sys_nice)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* 35 old ftime syscall holder */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* 35 */		/* old ftime syscall holder */
 	.long SYMBOL_NAME(sys_sync)
 	.long SYMBOL_NAME(sys_kill)
 	.long SYMBOL_NAME(sys_rename)
@@ -58,21 +58,21 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_dup)
 	.long SYMBOL_NAME(sys_pipe)
 	.long SYMBOL_NAME(sys_times)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* old prof syscall holder */
+	.long SYMBOL_NAME(sys_ni_syscall)				/* old prof syscall holder */
 	.long SYMBOL_NAME(sys_brk)		/* 45 */
 	.long SYMBOL_NAME(sys_setgid16)
 	.long SYMBOL_NAME(sys_getgid16)
 	.long SYMBOL_NAME(sys_signal)
 	.long SYMBOL_NAME(sys_geteuid16)
 	.long SYMBOL_NAME(sys_getegid16)	/* 50 */
 	.long SYMBOL_NAME(sys_acct)
-	.long SYMBOL_NAME(sys_umount)		/* recycled never used phys() */
-	.long SYMBOL_NAME(sys_ni_syscall)	/* old lock syscall holder */
+	.long SYMBOL_NAME(sys_umount)					/* recycled never used phys() */
+	.long SYMBOL_NAME(sys_ni_syscall)				/* old lock syscall holder */
 	.long SYMBOL_NAME(sys_ioctl)
 	.long SYMBOL_NAME(sys_fcntl)		/* 55 */
-	.long SYMBOL_NAME(sys_ni_syscall)	/* old mpx syscall holder */
+	.long SYMBOL_NAME(sys_ni_syscall)				/* old mpx syscall holder */
 	.long SYMBOL_NAME(sys_setpgid)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* old ulimit syscall holder */
+	.long SYMBOL_NAME(sys_ni_syscall)				/* old ulimit syscall holder */
 	.long SYMBOL_NAME(sys_ni_syscall)
 	.long SYMBOL_NAME(sys_umask)		/* 60 */
 	.long SYMBOL_NAME(sys_chroot)
@@ -112,7 +112,7 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_fchown16)		/* 95 */
 	.long SYMBOL_NAME(sys_getpriority)
 	.long SYMBOL_NAME(sys_setpriority)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* old profil syscall holder */
+	.long SYMBOL_NAME(sys_ni_syscall)				/* old profil syscall holder */
 	.long SYMBOL_NAME(sys_statfs)
 	.long SYMBOL_NAME(sys_fstatfs)		/* 100 */
 	.long SYMBOL_NAME(sys_ni_syscall)	/* ioperm for i386 */
@@ -202,8 +202,8 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_capset)           /* 185 */
 	.long SYMBOL_NAME(sys_sigaltstack)
 	.long SYMBOL_NAME(sys_sendfile)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* streams1 */
-	.long SYMBOL_NAME(sys_ni_syscall)	/* streams2 */
+	.long SYMBOL_NAME(sys_ni_syscall)		/* streams1 */
+	.long SYMBOL_NAME(sys_ni_syscall)		/* streams2 */
 	.long SYMBOL_NAME(sys_vfork)            /* 190 */
 	.long SYMBOL_NAME(sys_getrlimit)
 	.long SYMBOL_NAME(sys_mmap2)
@@ -236,10 +236,10 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_ni_syscall)
 	.long SYMBOL_NAME(sys_getdents64)	/* 220 */
 	.long SYMBOL_NAME(sys_fcntl64)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved TUX */
-	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved Security */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for TUX */
+	.long SYMBOL_NAME(sys_ni_syscall)
 	.long SYMBOL_NAME(sys_gettid)
-	.long SYMBOL_NAME(sys_readahead)	/* 225 */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* 225 */ /* sys_readahead */
 	.long SYMBOL_NAME(sys_setxattr)
 	.long SYMBOL_NAME(sys_lsetxattr)
 	.long SYMBOL_NAME(sys_fsetxattr)
@@ -257,8 +257,8 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_futex)		/* 240 */
 	.long SYMBOL_NAME(sys_sched_setaffinity)
 	.long SYMBOL_NAME(sys_sched_getaffinity)
-	.long SYMBOL_NAME(sys_ni_syscall)
-	.long SYMBOL_NAME(sys_ni_syscall)
+	.long SYMBOL_NAME(sys_ni_syscall)	/* sys_set_thread_area */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* sys_get_thread_area */
 	.long SYMBOL_NAME(sys_io_setup)		/* 245 */
 	.long SYMBOL_NAME(sys_io_destroy)
 	.long SYMBOL_NAME(sys_io_getevents)
@@ -288,51 +288,25 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_utimes)
  	.long SYMBOL_NAME(sys_fadvise64_64)
 	.long SYMBOL_NAME(sys_ni_syscall)	/* sys_vserver */
-	.long SYMBOL_NAME(sys_ni_syscall)
-	.long SYMBOL_NAME(sys_get_mempolicy)	/* 275 */
+	.long SYMBOL_NAME(sys_mbind)
+	.long SYMBOL_NAME(sys_get_mempolicy)
 	.long SYMBOL_NAME(sys_set_mempolicy)
 	.long SYMBOL_NAME(sys_mq_open)
 	.long SYMBOL_NAME(sys_mq_unlink)
 	.long SYMBOL_NAME(sys_mq_timedsend)
 	.long SYMBOL_NAME(sys_mq_timedreceive)	/* 280 */
 	.long SYMBOL_NAME(sys_mq_notify)
 	.long SYMBOL_NAME(sys_mq_getsetattr)
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for kexec */
 	.long SYMBOL_NAME(sys_waitid)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* sys_kexec_load */
-	.long SYMBOL_NAME(sys_add_key) 		/* 285 */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* 285 */ /* available */
+	.long SYMBOL_NAME(sys_add_key)
 	.long SYMBOL_NAME(sys_request_key)
 	.long SYMBOL_NAME(sys_keyctl)
-	.long SYMBOL_NAME(sys_ioprio_set)
-	.long SYMBOL_NAME(sys_ioprio_get)	/* 290 */
-	.long SYMBOL_NAME(sys_inotify_init)
-	.long SYMBOL_NAME(sys_inotify_add_watch)
-	.long SYMBOL_NAME(sys_inotify_rm_watch)
-	.long SYMBOL_NAME(sys_migrate_pages)
-	.long SYMBOL_NAME(sys_openat)		/* 295 */
-	.long SYMBOL_NAME(sys_mkdirat)
-	.long SYMBOL_NAME(sys_mknodat)
-	.long SYMBOL_NAME(sys_fchownat)
-	.long SYMBOL_NAME(sys_futimesat)
-	.long SYMBOL_NAME(sys_fstatat64)	/* 300 */
-	.long SYMBOL_NAME(sys_unlinkat)
-	.long SYMBOL_NAME(sys_renameat)
-	.long SYMBOL_NAME(sys_linkat)
-	.long SYMBOL_NAME(sys_symlinkat)
-	.long SYMBOL_NAME(sys_readlinkat)	/* 305 */
-	.long SYMBOL_NAME(sys_fchmodat)
-	.long SYMBOL_NAME(sys_faccessat)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* sys_pselect6 */
-	.long SYMBOL_NAME(sys_ni_syscall)	/* sys_ppoll */
-	.long SYMBOL_NAME(sys_unshare)		/* 310 */
-	.long SYMBOL_NAME(sys_set_robust_list)
-	.long SYMBOL_NAME(sys_get_robust_list)
-	.long SYMBOL_NAME(sys_splice)
-	.long SYMBOL_NAME(sys_sync_file_range)
-	.long SYMBOL_NAME(sys_tee)		/* 315 */
-	.long SYMBOL_NAME(sys_vmsplice)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* sys_move_pages */
-	.long SYMBOL_NAME(sys_getcpu)
-	.long SYMBOL_NAME(sys_ni_syscall)	/* sys_epoll_pwait */
+
+	.rept NR_syscalls-(.-SYMBOL_NAME(sys_call_table))/4
+		.long SYMBOL_NAME(sys_ni_syscall)
+	.endr
 
 	.macro	call_sp addr
 	mov.l	#SYMBOL_NAME(\addr),er6

trunk/arch/i386/kernel/syscall_table.S

@@ -320,6 +320,3 @@ ENTRY(sys_call_table)
 	.long sys_getcpu
 	.long sys_epoll_pwait
 	.long sys_utimensat		/* 320 */
-	.long sys_signalfd
-	.long sys_timerfd
-	.long sys_eventfd

trunk/arch/ia64/ia32/audit.c

@@ -20,11 +20,6 @@ unsigned ia32_read_class[] = {
 ~0U
 };
 
-unsigned ia32_signal_class[] = {
-#include <asm-generic/audit_signal.h>
-~0U
-};
-
 int ia32_classify_syscall(unsigned syscall)
 {
 	switch(syscall) {

trunk/arch/ia64/kernel/audit.c

@@ -23,20 +23,6 @@ static unsigned chattr_class[] = {
 ~0U
 };
 
-static unsigned signal_class[] = {
-#include <asm-generic/audit_signal.h>
-~0U
-};
-
-int audit_classify_arch(int arch)
-{
-#ifdef CONFIG_IA32_SUPPORT
-	if (arch == AUDIT_ARCH_I386)
-		return 1;
-#endif
-	return 0;
-}
-
 int audit_classify_syscall(int abi, unsigned syscall)
 {
 #ifdef CONFIG_IA32_SUPPORT
@@ -63,18 +49,15 @@ static int __init audit_classes_init(void)
 	extern __u32 ia32_write_class[];
 	extern __u32 ia32_read_class[];
 	extern __u32 ia32_chattr_class[];
-	extern __u32 ia32_signal_class[];
 	audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
 	audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
 	audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
-	audit_register_class(AUDIT_CLASS_SIGNAL_32, ia32_signal_class);
 #endif
 	audit_register_class(AUDIT_CLASS_WRITE, write_class);
 	audit_register_class(AUDIT_CLASS_READ, read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
 	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
-	audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
 	return 0;
 }
 

trunk/arch/m32r/Kconfig

@@ -241,10 +241,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config SCHED_NO_NO_OMIT_FRAME_POINTER
-        bool
-        default y
-
 config PREEMPT
 	bool "Preemptible Kernel"
 	help