---

yaml
---
r: 86396
b: refs/heads/master
c: 6e5e934
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: adefe11c5383face09068176af7dd4e3a80d8f6b
+refs/heads/master: 6e5e93424dc66542c548dfaa3bfebe30d46d50dd

trunk/Documentation/atomic_ops.txt

@@ -186,8 +186,7 @@ If the atomic value v is not equal to u, this function adds a to v, and
 returns non zero. If v is equal to u then it returns zero. This is done as
 an atomic operation.
 
-atomic_add_unless requires explicit memory barriers around the operation
-unless it fails (returns 0).
+atomic_add_unless requires explicit memory barriers around the operation.
 
 atomic_inc_not_zero, equivalent to atomic_add_unless(v, 1, 0)
 

trunk/Documentation/cgroups.txt

@@ -28,7 +28,7 @@ CONTENTS:
 4. Questions
 
 1. Control Groups
-=================
+==========
 
 1.1 What are cgroups ?
 ----------------------
@@ -143,10 +143,10 @@ proliferation of such cgroups.
 
 Also lets say that the administrator would like to give enhanced network
 access temporarily to a student's browser (since it is night and the user
-wants to do online gaming :))  OR give one of the students simulation
+wants to do online gaming :)  OR give one of the students simulation
 apps enhanced CPU power,
 
-With ability to write pids directly to resource classes, it's just a
+With ability to write pids directly to resource classes, its just a
 matter of :
 
        # echo pid > /mnt/network/<new_class>/tasks
@@ -227,13 +227,10 @@ Each cgroup is represented by a directory in the cgroup file system
 containing the following files describing that cgroup:
 
  - tasks: list of tasks (by pid) attached to that cgroup
- - releasable flag: cgroup currently removeable?
- - notify_on_release flag: run the release agent on exit?
- - release_agent: the path to use for release notifications (this file
-   exists in the top cgroup only)
+ - notify_on_release flag: run /sbin/cgroup_release_agent on exit?
 
 Other subsystems such as cpusets may add additional files in each
-cgroup dir.
+cgroup dir
 
 New cgroups are created using the mkdir system call or shell
 command.  The properties of a cgroup, such as its flags, are
@@ -260,7 +257,7 @@ performance.
 To allow access from a cgroup to the css_sets (and hence tasks)
 that comprise it, a set of cg_cgroup_link objects form a lattice;
 each cg_cgroup_link is linked into a list of cg_cgroup_links for
-a single cgroup on its cgrp_link_list field, and a list of
+a single cgroup on its cont_link_list field, and a list of
 cg_cgroup_links for a single css_set on its cg_link_list.
 
 Thus the set of tasks in a cgroup can be listed by iterating over
@@ -274,6 +271,9 @@ for cgroups, with a minimum of additional kernel code.
 1.4 What does notify_on_release do ?
 ------------------------------------
 
+*** notify_on_release is disabled in the current patch set. It will be
+*** reactivated in a future patch in a less-intrusive manner
+
 If the notify_on_release flag is enabled (1) in a cgroup, then
 whenever the last task in the cgroup leaves (exits or attaches to
 some other cgroup) and the last child cgroup of that cgroup
@@ -360,8 +360,8 @@ Now you want to do something with this cgroup.
 
 In this directory you can find several files:
 # ls
-notify_on_release releasable tasks
-(plus whatever files added by the attached subsystems)
+notify_on_release release_agent tasks
+(plus whatever files are added by the attached subsystems)
 
 Now attach your shell to this cgroup:
 # /bin/echo $$ > tasks
@@ -404,13 +404,19 @@ with a subsystem id which will be assigned by the cgroup system.
 Other fields in the cgroup_subsys object include:
 
 - subsys_id: a unique array index for the subsystem, indicating which
-  entry in cgroup->subsys[] this subsystem should be managing.
+  entry in cgroup->subsys[] this subsystem should be
+  managing. Initialized by cgroup_register_subsys(); prior to this
+  it should be initialized to -1
 
-- name: should be initialized to a unique subsystem name. Should be
-  no longer than MAX_CGROUP_TYPE_NAMELEN.
+- hierarchy: an index indicating which hierarchy, if any, this
+  subsystem is currently attached to. If this is -1, then the
+  subsystem is not attached to any hierarchy, and all tasks should be
+  considered to be members of the subsystem's top_cgroup. It should
+  be initialized to -1.
 
-- early_init: indicate if the subsystem needs early initialization
-  at system boot.
+- name: should be initialized to a unique subsystem name prior to
+  calling cgroup_register_subsystem. Should be no longer than
+  MAX_CGROUP_TYPE_NAMELEN
 
 Each cgroup object created by the system has an array of pointers,
 indexed by subsystem id; this pointer is entirely managed by the
@@ -428,6 +434,8 @@ situation.
 See kernel/cgroup.c for more details.
 
 Subsystems can take/release the cgroup_mutex via the functions
+cgroup_lock()/cgroup_unlock(), and can
+take/release the callback_mutex via the functions
 cgroup_lock()/cgroup_unlock().
 
 Accessing a task's cgroup pointer may be done in the following ways:
@@ -436,7 +444,7 @@ Accessing a task's cgroup pointer may be done in the following ways:
 - inside an rcu_read_lock() section via rcu_dereference()
 
 3.3 Subsystem API
------------------
+--------------------------
 
 Each subsystem should:
 
@@ -447,8 +455,7 @@ Each subsystem may export the following methods. The only mandatory
 methods are create/destroy. Any others that are null are presumed to
 be successful no-ops.
 
-struct cgroup_subsys_state *create(struct cgroup_subsys *ss,
-				   struct cgroup *cgrp)
+struct cgroup_subsys_state *create(struct cgroup *cont)
 (cgroup_mutex held by caller)
 
 Called to create a subsystem state object for a cgroup. The
@@ -463,7 +470,7 @@ identified by the passed cgroup object having a NULL parent (since
 it's the root of the hierarchy) and may be an appropriate place for
 initialization code.
 
-void destroy(struct cgroup_subsys *ss, struct cgroup *cgrp)
+void destroy(struct cgroup *cont)
 (cgroup_mutex held by caller)
 
 The cgroup system is about to destroy the passed cgroup; the subsystem
@@ -474,14 +481,7 @@ cgroup->parent is still valid. (Note - can also be called for a
 newly-created cgroup if an error occurs after this subsystem's
 create() method has been called for the new cgroup).
 
-void pre_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp);
-(cgroup_mutex held by caller)
-
-Called before checking the reference count on each subsystem. This may
-be useful for subsystems which have some extra references even if
-there are not tasks in the cgroup.
-
-int can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
+int can_attach(struct cgroup_subsys *ss, struct cgroup *cont,
 	       struct task_struct *task)
 (cgroup_mutex held by caller)
 
@@ -492,8 +492,8 @@ unspecified task can be moved into the cgroup. Note that this isn't
 called on a fork. If this method returns 0 (success) then this should
 remain valid while the caller holds cgroup_mutex.
 
-void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
-	    struct cgroup *old_cgrp, struct task_struct *task)
+void attach(struct cgroup_subsys *ss, struct cgroup *cont,
+	    struct cgroup *old_cont, struct task_struct *task)
 
 Called after the task has been attached to the cgroup, to allow any
 post-attachment activity that requires memory allocations or blocking.
@@ -505,9 +505,9 @@ registration for all existing tasks.
 
 void exit(struct cgroup_subsys *ss, struct task_struct *task)
 
-Called during task exit.
+Called during task exit
 
-int populate(struct cgroup_subsys *ss, struct cgroup *cgrp)
+int populate(struct cgroup_subsys *ss, struct cgroup *cont)
 
 Called after creation of a cgroup to allow a subsystem to populate
 the cgroup directory with file entries.  The subsystem should make
@@ -516,7 +516,7 @@ include/linux/cgroup.h for details).  Note that although this
 method can return an error code, the error code is currently not
 always handled well.
 
-void post_clone(struct cgroup_subsys *ss, struct cgroup *cgrp)
+void post_clone(struct cgroup_subsys *ss, struct cgroup *cont)
 
 Called at the end of cgroup_clone() to do any paramater
 initialization which might be required before a task could attach.  For

trunk/Documentation/controllers/memory.txt

@@ -170,14 +170,14 @@ NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
 mega or gigabytes.
 
 # cat /cgroups/0/memory.limit_in_bytes
-4194304
+4194304 Bytes
 
 NOTE: The interface has now changed to display the usage in bytes
 instead of pages
 
 We can check the usage:
 # cat /cgroups/0/memory.usage_in_bytes
-1216512
+1216512 Bytes
 
 A successful write to this file does not guarantee a successful set of
 this limit to the value written into the file.  This can be due to a
@@ -187,7 +187,7 @@ this file after a write to guarantee the value committed by the kernel.
 
 # echo -n 1 > memory.limit_in_bytes
 # cat memory.limit_in_bytes
-4096
+4096 Bytes
 
 The memory.failcnt field gives the number of times that the cgroup limit was
 exceeded.
@@ -233,6 +233,13 @@ cgroup might have some charge associated with it, even though all
 tasks have migrated away from it. Such charges are automatically dropped at
 rmdir() if there are no tasks.
 
+4.4 Choosing what to account  -- Page Cache (unmapped) vs RSS (mapped)?
+
+The type of memory accounted by the cgroup can be limited to just
+mapped pages by writing "1" to memory.control_type field
+
+echo -n 1 > memory.control_type
+
 5. TODO
 
 1. Add support for accounting huge pages (as a separate controller)
@@ -255,19 +262,18 @@ References
 3. Emelianov, Pavel. Resource controllers based on process cgroups
    http://lkml.org/lkml/2007/3/6/198
 4. Emelianov, Pavel. RSS controller based on process cgroups (v2)
-   http://lkml.org/lkml/2007/4/9/78
+   http://lkml.org/lkml/2007/4/9/74
 5. Emelianov, Pavel. RSS controller based on process cgroups (v3)
    http://lkml.org/lkml/2007/5/30/244
 6. Menage, Paul. Control Groups v10, http://lwn.net/Articles/236032/
 7. Vaidyanathan, Srinivasan, Control Groups: Pagecache accounting and control
    subsystem (v3), http://lwn.net/Articles/235534/
-8. Singh, Balbir. RSS controller v2 test results (lmbench),
+8. Singh, Balbir. RSS controller V2 test results (lmbench),
    http://lkml.org/lkml/2007/5/17/232
-9. Singh, Balbir. RSS controller v2 AIM9 results
+9. Singh, Balbir. RSS controller V2 AIM9 results
    http://lkml.org/lkml/2007/5/18/1
-10. Singh, Balbir. Memory controller v6 test results,
+10. Singh, Balbir. Memory controller v6 results,
     http://lkml.org/lkml/2007/8/19/36
-11. Singh, Balbir. Memory controller introduction (v6),
-    http://lkml.org/lkml/2007/8/17/69
+11. Singh, Balbir. Memory controller v6, http://lkml.org/lkml/2007/8/17/69
 12. Corbet, Jonathan, Controlling memory use in cgroups,
     http://lwn.net/Articles/243795/

trunk/Documentation/cpusets.txt

@@ -209,7 +209,7 @@ and name space for cpusets, with a minimum of additional kernel code.
 The cpus and mems files in the root (top_cpuset) cpuset are
 read-only.  The cpus file automatically tracks the value of
 cpu_online_map using a CPU hotplug notifier, and the mems file
-automatically tracks the value of node_states[N_HIGH_MEMORY]--i.e.,
+automatically tracks the value of node_states[N_MEMORY]--i.e.,
 nodes with memory--using the cpuset_track_online_nodes() hook.
 
 

trunk/Documentation/debugging-via-ohci1394.txt

@@ -36,15 +36,14 @@ available (notebooks) or too slow for extensive debug information (like ACPI).
 Drivers
 -------
 
-The ohci1394 driver in drivers/ieee1394 initializes the OHCI-1394 controllers
-to a working state and enables physical DMA by default for all remote nodes.
-This can be turned off by ohci1394's module parameter phys_dma=0.
-
-The alternative firewire-ohci driver in drivers/firewire uses filtered physical
-DMA, hence is not yet suitable for remote debugging.
-
-Because ohci1394 depends on the PCI enumeration to be completed, an
-initialization routine which runs pretty early (long before console_init()
+The OHCI-1394 drivers in drivers/firewire and drivers/ieee1394 initialize
+the OHCI-1394 controllers to a working state and can be used to enable
+physical DMA. By default you only have to load the driver, and physical
+DMA access will be granted to all remote nodes, but it can be turned off
+when using the ohci1394 driver.
+
+Because these drivers depend on the PCI enumeration to be completed, an
+initialization routine which can runs pretty early (long before console_init(),
 which makes the printk buffer appear on the console can be called) was written.
 
 To activate it, enable CONFIG_PROVIDE_OHCI1394_DMA_INIT (Kernel hacking menu:

trunk/Documentation/hwmon/coretemp

@@ -4,10 +4,9 @@ Kernel driver coretemp
 Supported chips:
   * All Intel Core family
     Prefix: 'coretemp'
-    CPUID: family 0x6, models 0xe, 0xf, 0x16, 0x17
+    CPUID: family 0x6, models 0xe, 0xf, 0x16
     Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
                Volume 3A: System Programming Guide
-               http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
 
 Author: Rudolf Marek
 
@@ -26,8 +25,7 @@ may be raised, if the temperature grows enough (more than TjMax) to trigger
 the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
 
 temp1_input	 - Core temperature (in millidegrees Celsius).
-temp1_max	 - All cooling devices should be turned on (on Core2).
-temp1_crit	 - Maximum junction temperature (in millidegrees Celsius).
+temp1_crit	 - Maximum junction temperature  (in millidegrees Celsius).
 temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
 		   Correct CPU operation is no longer guaranteed.
 temp1_label	 - Contains string "Core X", where X is processor