---

yaml
---
r: 98623
b: refs/heads/master
c: a16b4bc
h: refs/heads/master
i:
  98621: ec084e6
  98619: 580bc73
  98615: f927bc8
  98607: 5de2e49
  98591: cd2a8d4
  98559: b15503f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 4283e1babe167e0ba856bb5d039465358e90785c
+refs/heads/master: a16b4bcd31a73a81b6d2b8ffa6b5f6ed01cf6d64

trunk/Documentation/i2c/writing-clients

@@ -25,12 +25,23 @@ routines, and should be zero-initialized except for fields with data you
 provide.  A client structure holds device-specific information like the
 driver model device node, and its I2C address.
 
+/* iff driver uses driver model ("new style") binding model: */
+
+static struct i2c_device_id foo_idtable[] = {
+	{ "foo", my_id_for_foo },
+	{ "bar", my_id_for_bar },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, foo_idtable);
+
 static struct i2c_driver foo_driver = {
 	.driver = {
 		.name	= "foo",
 	},
 
 	/* iff driver uses driver model ("new style") binding model: */
+	.id_table	= foo_ids,
 	.probe		= foo_probe,
 	.remove		= foo_remove,
 
@@ -173,10 +184,9 @@ handle may be used during foo_probe().  If foo_probe() reports success
 (zero not a negative status code) it may save the handle and use it until
 foo_remove() returns.  That binding model is used by most Linux drivers.
 
-Drivers match devices when i2c_client.driver_name and the driver name are
-the same; this approach is used in several other busses that don't have
-device typing support in the hardware.  The driver and module name should
-match, so hotplug/coldplug mechanisms will modprobe the driver.
+The probe function is called when an entry in the id_table name field
+matches the device's name. It is passed the entry that was matched so
+the driver knows which one in the table matched.
 
 
 Device Creation (Standard driver model)

trunk/Documentation/networking/ip-sysctl.txt

@@ -81,23 +81,23 @@ inet_peer_minttl - INTEGER
 	Minimum time-to-live of entries.  Should be enough to cover fragment
 	time-to-live on the reassembling side.  This minimum time-to-live  is
 	guaranteed if the pool size is less than inet_peer_threshold.
-	Measured in jiffies(1).
+	Measured in seconds.
 
 inet_peer_maxttl - INTEGER
 	Maximum time-to-live of entries.  Unused entries will expire after
 	this period of time if there is no memory pressure on the pool (i.e.
 	when the number of entries in the pool is very small).
-	Measured in jiffies(1).
+	Measured in seconds.
 
 inet_peer_gc_mintime - INTEGER
 	Minimum interval between garbage collection passes.  This interval is
 	in effect under high memory pressure on the pool.
-	Measured in jiffies(1).
+	Measured in seconds.
 
 inet_peer_gc_maxtime - INTEGER
 	Minimum interval between garbage collection passes.  This interval is
 	in effect under low (or absent) memory pressure on the pool.
-	Measured in jiffies(1).
+	Measured in seconds.
 
 TCP variables: 
 
@@ -794,10 +794,6 @@ tag - INTEGER
 	Allows you to write a number, which can be used as required.
 	Default value is 0.
 
-(1) Jiffie: internal timeunit for the kernel. On the i386 1/100s, on the
-Alpha 1/1024s. See the HZ define in /usr/include/asm/param.h for the exact
-value on your system. 
-
 Alexey Kuznetsov.
 kuznet@ms2.inr.ac.ru
 

trunk/Documentation/networking/s2io.txt

@@ -83,9 +83,9 @@ Valid range: Limited by memory on system
 Default: 30 
 
 e. intr_type
-Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X)
-Valid range: 1-3
-Default: 1 
+Specifies interrupt type. Possible values 0(INTA), 2(MSI-X)
+Valid values: 0, 2
+Default: 2
 
 5.  Performance suggestions
 General:

trunk/arch/arm/common/dmabounce.c

@@ -650,7 +650,8 @@ EXPORT_SYMBOL(dma_map_sg);
 EXPORT_SYMBOL(dma_unmap_sg);
 EXPORT_SYMBOL(dma_sync_single_for_cpu);
 EXPORT_SYMBOL(dma_sync_single_for_device);
-EXPORT_SYMBOL(dma_sync_sg);
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+EXPORT_SYMBOL(dma_sync_sg_for_device);
 EXPORT_SYMBOL(dmabounce_register_dev);
 EXPORT_SYMBOL(dmabounce_unregister_dev);
 

trunk/arch/arm/mach-omap2/gpmc.c

@@ -42,7 +42,7 @@
 #define GPMC_STATUS		0x54
 #define GPMC_PREFETCH_CONFIG1	0x1e0
 #define GPMC_PREFETCH_CONFIG2	0x1e4
-#define GPMC_PREFETCH_CONTROL	0x1e8
+#define GPMC_PREFETCH_CONTROL	0x1ec
 #define GPMC_PREFETCH_STATUS	0x1f0
 #define GPMC_ECC_CONFIG		0x1f4
 #define GPMC_ECC_CONTROL	0x1f8

trunk/arch/arm/mach-realview/platsmp.c

@@ -74,6 +74,8 @@ static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
+	trace_hardirqs_off();
+
 	/*
 	 * the primary core may have used a "cross call" soft interrupt
 	 * to get this processor out of WFI in the BootMonitor - make

trunk/arch/arm/plat-omap/dma.c

@@ -501,8 +501,6 @@ static inline void omap_enable_channel_irq(int lch)
 
 	/* Enable some nice interrupts. */
 	OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
-
-	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
 
 static void omap_disable_channel_irq(int lch)

trunk/arch/powerpc/boot/Makefile

@@ -273,7 +273,8 @@ endif
 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
 initrd-y := $(patsubst zImage%, zImage.initrd%, \
 		$(patsubst dtbImage%, dtbImage.initrd%, \
-		$(patsubst treeImage%, treeImage.initrd%, $(image-y))))
+		$(patsubst simpleImage%, simpleImage.initrd%, \
+		$(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
 initrd-y := $(filter-out $(image-y), $(initrd-y))
 targets	+= $(image-y) $(initrd-y)
 

trunk/arch/powerpc/kernel/legacy_serial.c

@@ -136,6 +136,11 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	if (of_get_property(np, "clock-frequency", NULL) == NULL)
 		return -1;
 
+	/* if reg-shift or offset, don't try to use it */
+	if ((of_get_property(np, "reg-shift", NULL) != NULL) ||
+		(of_get_property(np, "reg-offset", NULL) != NULL))
+		return -1;
+
 	/* if rtas uses this device, don't try to use it as well */
 	if (of_get_property(np, "used-by-rtas", NULL) != NULL)
 		return -1;

trunk/arch/powerpc/platforms/52xx/lite5200_pm.c

@@ -14,6 +14,7 @@ static struct mpc52xx_sdma __iomem *bes;
 static struct mpc52xx_xlb __iomem *xlb;
 static struct mpc52xx_gpio __iomem *gps;
 static struct mpc52xx_gpio_wkup __iomem *gpw;
+static void __iomem *pci;
 static void __iomem *sram;
 static const int sram_size = 0x4000;	/* 16 kBytes */
 static void __iomem *mbar;
@@ -50,6 +51,8 @@ static int lite5200_pm_prepare(void)
 		{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
 		{}
 	};
+	u64 regaddr64 = 0;
+	const u32 *regaddr_p;
 
 	/* deep sleep? let mpc52xx code handle that */
 	if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
@@ -60,8 +63,12 @@ static int lite5200_pm_prepare(void)
 
 	/* map registers */
 	np = of_find_matching_node(NULL, immr_ids);
-	mbar = of_iomap(np, 0);
+	regaddr_p = of_get_address(np, 0, NULL, NULL);
+	if (regaddr_p)
+		regaddr64 = of_translate_address(np, regaddr_p);
 	of_node_put(np);
+
+	mbar = ioremap((u32) regaddr64, 0xC000);
 	if (!mbar) {
 		printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
 		return -ENOSYS;
@@ -71,6 +78,7 @@ static int lite5200_pm_prepare(void)
 	pic = mbar + 0x500;
 	gps = mbar + 0xb00;
 	gpw = mbar + 0xc00;
+	pci = mbar + 0xd00;
 	bes = mbar + 0x1200;
 	xlb = mbar + 0x1f00;
 	sram = mbar + 0x8000;
@@ -85,6 +93,7 @@ static struct mpc52xx_sdma sbes;
 static struct mpc52xx_xlb sxlb;
 static struct mpc52xx_gpio sgps;
 static struct mpc52xx_gpio_wkup sgpw;
+static char spci[0x200];
 
 static void lite5200_save_regs(void)
 {
@@ -94,6 +103,7 @@ static void lite5200_save_regs(void)
 	_memcpy_fromio(&sxlb, xlb, sizeof(*xlb));
 	_memcpy_fromio(&sgps, gps, sizeof(*gps));
 	_memcpy_fromio(&sgpw, gpw, sizeof(*gpw));
+	_memcpy_fromio(spci, pci, 0x200);
 
 	_memcpy_fromio(saved_sram, sram, sram_size);
 }
@@ -103,6 +113,8 @@ static void lite5200_restore_regs(void)
 	int i;
 	_memcpy_toio(sram, saved_sram, sram_size);
 
+	/* PCI Configuration */
+	_memcpy_toio(pci, spci, 0x200);
 
 	/*
 	 * GPIOs. Interrupt Master Enable has higher address then other

trunk/arch/x86/Kconfig

@@ -966,8 +966,8 @@ config NUMA_EMU
 	  number of nodes. This is only useful for debugging.
 
 config NODES_SHIFT
-	int "Max num nodes shift(1-15)"
-	range 1 15  if X86_64
+	int "Max num nodes shift(1-9)"
+	range 1 9  if X86_64
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"

trunk/drivers/char/drm/i915_irq.c

@@ -62,11 +62,11 @@ static void i915_vblank_tasklet(struct drm_device *dev)
 	u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
 	RING_LOCALS;
 
-	if (sarea_priv->front_tiled) {
+	if (IS_I965G(dev) && sarea_priv->front_tiled) {
 		cmd |= XY_SRC_COPY_BLT_DST_TILED;
 		dst_pitch >>= 2;
 	}
-	if (sarea_priv->back_tiled) {
+	if (IS_I965G(dev) && sarea_priv->back_tiled) {
 		cmd |= XY_SRC_COPY_BLT_SRC_TILED;
 		src_pitch >>= 2;
 	}

trunk/drivers/char/tty_io.c

@@ -3322,7 +3322,7 @@ static int send_break(struct tty_struct *tty, unsigned int duration)
 		msleep_interruptible(duration);
 	tty->ops->break_ctl(tty, 0);
 	tty_write_unlock(tty);
-	if (!signal_pending(current))
+	if (signal_pending(current))
 		return -EINTR;
 	return 0;
 }

trunk/drivers/connector/connector.c

@@ -27,6 +27,8 @@
 #include <linux/moduleparam.h>
 #include <linux/connector.h>
 #include <linux/mutex.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
 
 #include <net/sock.h>
 
@@ -403,6 +405,40 @@ static void cn_callback(void *data)
 	mutex_unlock(&notify_lock);
 }
 
+static int cn_proc_show(struct seq_file *m, void *v)
+{
+	struct cn_queue_dev *dev = cdev.cbdev;
+	struct cn_callback_entry *cbq;
+
+	seq_printf(m, "Name            ID\n");
+
+	spin_lock_bh(&dev->queue_lock);
+
+	list_for_each_entry(cbq, &dev->queue_list, callback_entry) {
+		seq_printf(m, "%-15s %u:%u\n",
+			   cbq->id.name,
+			   cbq->id.id.idx,
+			   cbq->id.id.val);
+	}
+
+	spin_unlock_bh(&dev->queue_lock);
+
+	return 0;
+}
+
+static int cn_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cn_proc_show, NULL);
+}
+
+static const struct file_operations cn_file_ops = {
+	.owner   = THIS_MODULE,
+	.open    = cn_proc_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = single_release
+};
+
 static int __devinit cn_init(void)
 {
 	struct cn_dev *dev = &cdev;
@@ -434,6 +470,8 @@ static int __devinit cn_init(void)
 		return -EINVAL;
 	}
 
+	proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops);
+
 	return 0;
 }
 
@@ -443,6 +481,8 @@ static void __devexit cn_fini(void)
 
 	cn_already_initialized = 0;
 
+	proc_net_remove(&init_net, "connector");
+
 	cn_del_callback(&dev->id);
 	cn_queue_free_dev(dev->cbdev);
 	netlink_kernel_release(dev->nls);

trunk/drivers/input/ff-core.c

@@ -28,6 +28,7 @@
 #include <linux/input.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/sched.h>
 
 /*
  * Check that the effect_id is a valid effect and whether the user

trunk/drivers/md/dm-crypt.c

@@ -432,6 +432,7 @@ static int crypt_convert(struct crypt_config *cc,
 		case 0:
 			atomic_dec(&ctx->pending);
 			ctx->sector++;
+			cond_resched();
 			continue;
 
 		/* error */

trunk/drivers/md/md.c

@@ -3897,8 +3897,10 @@ static void autorun_devices(int part)
 
 		md_probe(dev, NULL, NULL);
 		mddev = mddev_find(dev);
-		if (!mddev) {
-			printk(KERN_ERR 
+		if (!mddev || !mddev->gendisk) {
+			if (mddev)
+				mddev_put(mddev);
+			printk(KERN_ERR
 				"md: cannot allocate memory for md drive.\n");
 			break;
 		}

trunk/drivers/md/raid10.c

@@ -2137,6 +2137,8 @@ static int run(mddev_t *mddev)
 		    !test_bit(In_sync, &disk->rdev->flags)) {
 			disk->head_position = 0;
 			mddev->degraded++;
+			if (disk->rdev)
+				conf->fullsync = 1;
 		}
 	}
 

trunk/drivers/md/raid5.c

@@ -2898,6 +2898,8 @@ static void handle_stripe5(struct stripe_head *sh)
 
 		for (i = conf->raid_disks; i--; ) {
 			set_bit(R5_Wantwrite, &sh->dev[i].flags);
+			set_bit(R5_LOCKED, &dev->flags);
+			s.locked++;
 			if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
 				sh->ops.count++;
 		}
@@ -2911,6 +2913,7 @@ static void handle_stripe5(struct stripe_head *sh)
 			conf->raid_disks);
 		s.locked += handle_write_operations5(sh, 1, 1);
 	} else if (s.expanded &&
+		   s.locked == 0 &&
 		!test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
 		clear_bit(STRIPE_EXPAND_READY, &sh->state);
 		atomic_dec(&conf->reshape_stripes);
@@ -4305,7 +4308,9 @@ static int run(mddev_t *mddev)
 				" disk %d\n", bdevname(rdev->bdev,b),
 				raid_disk);
 			working_disks++;
-		}
+		} else
+			/* Cannot rely on bitmap to complete recovery */
+			conf->fullsync = 1;
 	}
 
 	/*

trunk/drivers/net/3c59x.c

@@ -1768,9 +1768,10 @@ vortex_timer(unsigned long data)
 	case XCVR_MII: case XCVR_NWAY:
 		{
 			ok = 1;
-			spin_lock_bh(&vp->lock);
+			/* Interrupts are already disabled */
+			spin_lock(&vp->lock);
 			vortex_check_media(dev, 0);
-			spin_unlock_bh(&vp->lock);
+			spin_unlock(&vp->lock);
 		}
 		break;
 	  default:					/* Other media types handled by Tx timeouts. */