---

yaml
---
r: 263840
b: refs/heads/master
c: fa75870
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: cd5bd3df1a6e7a68454734fb109c409101c20f42
+refs/heads/master: fa758702c298c98674ec641e9252e507ddaa29be

trunk/Documentation/ABI/testing/sysfs-class-scsi_host

@@ -0,0 +1,13 @@
+What:		/sys/class/scsi_host/hostX/isci_id
+Date:		June 2011
+Contact:	Dave Jiang <dave.jiang@intel.com>
+Description:
+		This file contains the enumerated host ID for the Intel
+		SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+		Storage Control Unit embeds up to two 4-port controllers in
+		a single PCI device.  The controllers are enumerated in order
+		which usually means the lowest number scsi_host corresponds
+		with the first controller, but this association is not
+		guaranteed.  The 'isci_id' attribute unambiguously identifies
+		the controller index: '0' for the first controller,
+		'1' for the second.

trunk/Documentation/cgroups/memory.txt

@@ -380,7 +380,7 @@ will be charged as a new owner of it.
 
 5.2 stat file
 
-5.2.1 memory.stat file includes following statistics
+memory.stat file includes following statistics
 
 # per-memory cgroup local status
 cache		- # of bytes of page cache memory.
@@ -438,89 +438,6 @@ Note:
 	 file_mapped is accounted only when the memory cgroup is owner of page
 	 cache.)
 
-5.2.2 memory.vmscan_stat
-
-memory.vmscan_stat includes statistics information for memory scanning and
-freeing, reclaiming. The statistics shows memory scanning information since
-memory cgroup creation and can be reset to 0 by writing 0 as
-
- #echo 0 > ../memory.vmscan_stat
-
-This file contains following statistics.
-
-[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy]
-[param]_elapsed_ns_by_[reason]_[under_hierarchy]
-
-For example,
-
-  scanned_file_pages_by_limit indicates the number of scanned
-  file pages at vmscan.
-
-Now, 3 parameters are supported
-
-  scanned - the number of pages scanned by vmscan
-  rotated - the number of pages activated at vmscan
-  freed   - the number of pages freed by vmscan
-
-If "rotated" is high against scanned/freed, the memcg seems busy.
-
-Now, 2 reason are supported
-
-  limit - the memory cgroup's limit
-  system - global memory pressure + softlimit
-           (global memory pressure not under softlimit is not handled now)
-
-When under_hierarchy is added in the tail, the number indicates the
-total memcg scan of its children and itself.
-
-elapsed_ns is a elapsed time in nanosecond. This may include sleep time
-and not indicates CPU usage. So, please take this as just showing
-latency.
-
-Here is an example.
-
-# cat /cgroup/memory/A/memory.vmscan_stat
-scanned_pages_by_limit 9471864
-scanned_anon_pages_by_limit 6640629
-scanned_file_pages_by_limit 2831235
-rotated_pages_by_limit 4243974
-rotated_anon_pages_by_limit 3971968
-rotated_file_pages_by_limit 272006
-freed_pages_by_limit 2318492
-freed_anon_pages_by_limit 962052
-freed_file_pages_by_limit 1356440
-elapsed_ns_by_limit 351386416101
-scanned_pages_by_system 0
-scanned_anon_pages_by_system 0
-scanned_file_pages_by_system 0
-rotated_pages_by_system 0
-rotated_anon_pages_by_system 0
-rotated_file_pages_by_system 0
-freed_pages_by_system 0
-freed_anon_pages_by_system 0
-freed_file_pages_by_system 0
-elapsed_ns_by_system 0
-scanned_pages_by_limit_under_hierarchy 9471864
-scanned_anon_pages_by_limit_under_hierarchy 6640629
-scanned_file_pages_by_limit_under_hierarchy 2831235
-rotated_pages_by_limit_under_hierarchy 4243974
-rotated_anon_pages_by_limit_under_hierarchy 3971968
-rotated_file_pages_by_limit_under_hierarchy 272006
-freed_pages_by_limit_under_hierarchy 2318492
-freed_anon_pages_by_limit_under_hierarchy 962052
-freed_file_pages_by_limit_under_hierarchy 1356440
-elapsed_ns_by_limit_under_hierarchy 351386416101
-scanned_pages_by_system_under_hierarchy 0
-scanned_anon_pages_by_system_under_hierarchy 0
-scanned_file_pages_by_system_under_hierarchy 0
-rotated_pages_by_system_under_hierarchy 0
-rotated_anon_pages_by_system_under_hierarchy 0
-rotated_file_pages_by_system_under_hierarchy 0
-freed_pages_by_system_under_hierarchy 0
-freed_anon_pages_by_system_under_hierarchy 0
-freed_file_pages_by_system_under_hierarchy 0
-elapsed_ns_by_system_under_hierarchy 0
-
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.

trunk/Documentation/kernel-parameters.txt

@@ -2086,9 +2086,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Override pmtimer IOPort with a hex value.
 			e.g. pmtmr=0x508
 
-	pnp.debug	[PNP]
-			Enable PNP debug messages.  This depends on the
-			CONFIG_PNP_DEBUG_MESSAGES option.
+	pnp.debug=1	[PNP]
+			Enable PNP debug messages (depends on the
+			CONFIG_PNP_DEBUG_MESSAGES option).  Change at run-time
+			via /sys/module/pnp/parameters/debug.  We always show
+			current resource usage; turning this on also shows
+			possible settings and some assignment information.
 
 	pnpacpi=	[ACPI]
 			{ off }

trunk/MAINTAINERS

@@ -3262,6 +3262,17 @@ F:	Documentation/input/multi-touch-protocol.txt
 F:	drivers/input/input-mt.c
 K:	\b(ABS|SYN)_MT_
 
+INTEL C600 SERIES SAS CONTROLLER DRIVER
+M:	Intel SCU Linux support <intel-linux-scu@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
+M:	Dave Jiang <dave.jiang@intel.com>
+M:	Ed Nadolski <edmund.nadolski@intel.com>
+L:	linux-scsi@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
+S:	Maintained
+F:	drivers/scsi/isci/
+F:	firmware/isci/
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
@@ -4774,7 +4785,7 @@ F:	drivers/net/wireless/orinoco/
 
 OSD LIBRARY and FILESYSTEM
 M:	Boaz Harrosh <bharrosh@panasas.com>
-M:	Benny Halevy <bhalevy@panasas.com>
+M:	Benny Halevy <bhalevy@tonian.com>
 L:	osd-dev@open-osd.org
 W:	http://open-osd.org
 T:	git git://git.open-osd.org/open-osd.git

trunk/arch/alpha/Kconfig

@@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE
         def_bool y
 
 config GENERIC_GPIO
-	def_bool y
+	bool
 
 config ZONE_DMA
 	bool

trunk/arch/um/Kconfig.x86

@@ -10,6 +10,10 @@ config CMPXCHG_LOCAL
 	bool
 	default n
 
+config CMPXCHG_DOUBLE
+	bool
+	default n
+
 source "arch/x86/Kconfig.cpu"
 
 endmenu

trunk/arch/um/Makefile

@@ -41,7 +41,7 @@ KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)
 KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
 	$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap	\
 	-Din6addr_loopback=kernel_in6addr_loopback \
-	-Din6addr_any=kernel_in6addr_any
+	-Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
 
 KBUILD_AFLAGS += $(ARCH_INCLUDE)
 

trunk/arch/um/drivers/line.c

@@ -399,8 +399,8 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data)
  * is done under a spinlock.  Checking whether the device is in use is
  * line->tty->count > 1, also under the spinlock.
  *
- * tty->count serves to decide whether the device should be enabled or
- * disabled on the host.  If it's equal to 1, then we are doing the
+ * line->count serves to decide whether the device should be enabled or
+ * disabled on the host.  If it's equal to 0, then we are doing the
  * first open or last close.  Otherwise, open and close just return.
  */
 
@@ -414,16 +414,16 @@ int line_open(struct line *lines, struct tty_struct *tty)
 		goto out_unlock;
 
 	err = 0;
-	if (tty->count > 1)
+	if (line->count++)
 		goto out_unlock;
 
-	spin_unlock(&line->count_lock);
-
+	BUG_ON(tty->driver_data);
 	tty->driver_data = line;
 	line->tty = tty;
 
+	spin_unlock(&line->count_lock);
 	err = enable_chan(line);
-	if (err)
+	if (err) /* line_close() will be called by our caller */
 		return err;
 
 	INIT_DELAYED_WORK(&line->task, line_timer_cb);
@@ -436,7 +436,7 @@ int line_open(struct line *lines, struct tty_struct *tty)
 	chan_window_size(&line->chan_list, &tty->winsize.ws_row,
 			 &tty->winsize.ws_col);
 
-	return err;
+	return 0;
 
 out_unlock:
 	spin_unlock(&line->count_lock);
@@ -460,17 +460,16 @@ void line_close(struct tty_struct *tty, struct file * filp)
 	flush_buffer(line);
 
 	spin_lock(&line->count_lock);
-	if (!line->valid)
-		goto out_unlock;
+	BUG_ON(!line->valid);
 
-	if (tty->count > 1)
+	if (--line->count)
 		goto out_unlock;
 
-	spin_unlock(&line->count_lock);
-
 	line->tty = NULL;
 	tty->driver_data = NULL;
 
+	spin_unlock(&line->count_lock);
+
 	if (line->sigio) {
 		unregister_winch(tty);
 		line->sigio = 0;
@@ -498,7 +497,7 @@ static int setup_one_line(struct line *lines, int n, char *init, int init_prio,
 
 	spin_lock(&line->count_lock);
 
-	if (line->tty != NULL) {
+	if (line->count) {
 		*error_out = "Device is already open";
 		goto out;
 	}
@@ -722,41 +721,53 @@ struct winch {
 	int pid;
 	struct tty_struct *tty;
 	unsigned long stack;
+	struct work_struct work;
 };
 
-static void free_winch(struct winch *winch, int free_irq_ok)
+static void __free_winch(struct work_struct *work)
 {
-	if (free_irq_ok)
-		free_irq(WINCH_IRQ, winch);
-
-	list_del(&winch->list);
+	struct winch *winch = container_of(work, struct winch, work);
+	free_irq(WINCH_IRQ, winch);
 
 	if (winch->pid != -1)
 		os_kill_process(winch->pid, 1);
-	if (winch->fd != -1)
-		os_close_file(winch->fd);
 	if (winch->stack != 0)
 		free_stack(winch->stack, 0);
 	kfree(winch);
 }
 
+static void free_winch(struct winch *winch)
+{
+	int fd = winch->fd;
+	winch->fd = -1;
+	if (fd != -1)
+		os_close_file(fd);
+	list_del(&winch->list);
+	__free_winch(&winch->work);
+}
+
 static irqreturn_t winch_interrupt(int irq, void *data)
 {
 	struct winch *winch = data;
 	struct tty_struct *tty;
 	struct line *line;
+	int fd = winch->fd;
 	int err;
 	char c;
 
-	if (winch->fd != -1) {
-		err = generic_read(winch->fd, &c, NULL);
+	if (fd != -1) {
+		err = generic_read(fd, &c, NULL);
 		if (err < 0) {
 			if (err != -EAGAIN) {
+				winch->fd = -1;
+				list_del(&winch->list);
+				os_close_file(fd);
 				printk(KERN_ERR "winch_interrupt : "
 				       "read failed, errno = %d\n", -err);
 				printk(KERN_ERR "fd %d is losing SIGWINCH "
 				       "support\n", winch->tty_fd);
-				free_winch(winch, 0);
+				INIT_WORK(&winch->work, __free_winch);
+				schedule_work(&winch->work);
 				return IRQ_HANDLED;
 			}
 			goto out;
@@ -828,7 +839,7 @@ static void unregister_winch(struct tty_struct *tty)
 	list_for_each_safe(ele, next, &winch_handlers) {
 		winch = list_entry(ele, struct winch, list);
 		if (winch->tty == tty) {
-			free_winch(winch, 1);
+			free_winch(winch);
 			break;
 		}
 	}
@@ -844,7 +855,7 @@ static void winch_cleanup(void)
 
 	list_for_each_safe(ele, next, &winch_handlers) {
 		winch = list_entry(ele, struct winch, list);
-		free_winch(winch, 1);
+		free_winch(winch);
 	}
 
 	spin_unlock(&winch_handler_lock);

trunk/arch/um/drivers/xterm.c

@@ -123,6 +123,7 @@ static int xterm_open(int input, int output, int primary, void *d,
 		err = -errno;
 		printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n",
 		       errno);
+		close(fd);
 		return err;
 	}
 	close(fd);

trunk/arch/um/include/asm/ptrace-generic.h

@@ -42,10 +42,6 @@ extern long subarch_ptrace(struct task_struct *child, long request,
 	unsigned long addr, unsigned long data);
 extern unsigned long getreg(struct task_struct *child, int regno);
 extern int putreg(struct task_struct *child, int regno, unsigned long value);
-extern int get_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
-extern int set_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
 
 extern int arch_copy_tls(struct task_struct *new);
 extern void clear_flushed_tls(struct task_struct *task);

trunk/arch/um/include/shared/line.h

@@ -33,6 +33,7 @@ struct line_driver {
 struct line {
 	struct tty_struct *tty;
 	spinlock_t count_lock;
+	unsigned long count;
 	int valid;
 
 	char *init_str;

trunk/arch/um/include/shared/registers.h

@@ -16,7 +16,7 @@ extern int restore_fpx_registers(int pid, unsigned long *fp_regs);
 extern int save_registers(int pid, struct uml_pt_regs *regs);
 extern int restore_registers(int pid, struct uml_pt_regs *regs);
 extern int init_registers(int pid);
-extern void get_safe_registers(unsigned long *regs);
+extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
 extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
 extern int get_fp_registers(int pid, unsigned long *regs);
 extern int put_fp_registers(int pid, unsigned long *regs);

trunk/arch/um/kernel/process.c

@@ -202,7 +202,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		arch_copy_thread(&current->thread.arch, &p->thread.arch);
 	}
 	else {
-		get_safe_registers(p->thread.regs.regs.gp);
+		get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp);
 		p->thread.request.u.thread = current->thread.request.u.thread;
 		handler = new_thread_handler;
 	}