---

yaml
---
r: 20435
b: refs/heads/master
c: 69454e6
h: refs/heads/master
i:
  20433: 4ed9863
  20431: a735a80
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: dc7bf130b8552a218e2f3ea0b58268e469f335da
+refs/heads/master: 69454e6991091d0d6eb7461653f2695d985e1a74

trunk/Documentation/kernel-parameters.txt

@@ -1133,6 +1133,8 @@ running once the system is up.
 				Mechanism 1.
 		conf2		[IA-32] Force use of PCI Configuration
 				Mechanism 2.
+		nommconf	[IA-32,X86_64] Disable use of MMCONFIG for PCI
+				Configuration
 		nosort		[IA-32] Don't sort PCI devices according to
 				order given by the PCI BIOS. This sorting is
 				done to get a device order compatible with
@@ -1636,6 +1638,9 @@ running once the system is up.
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
 
+	norandmaps	Don't use address space randomization
+			Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space
+
 
 ______________________________________________________________________
 Changelog:

trunk/Documentation/scsi/ChangeLog.megaraid_sas

@@ -1,3 +1,26 @@
+1 Release Date    : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.04
+3 Older Version   : 00.00.02.04 
+
+i.	Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
+	During initialization, depending on the device id, the template members 
+	are initialized with function pointers specific to the ppc or 
+	xscale controllers.  
+
+		-Sumant Patro <Sumant.Patro@lsil.com>
+
+1 Release Date    : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro 
+							<Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.04
+3 Older Version   : 00.00.02.02 
+i.	Register 16 byte CDB capability with scsi midlayer 
+
+	"Ths patch properly registers the 16 byte command length capability of the 
+	megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas 
+	hardware supports 16 byte CDB's."
+
+		-Joshua Giles <joshua_giles@dell.com> 
+
 1 Release Date    : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
 2 Current Version : 00.00.02.02
 3 Older Version   : 00.00.02.01 

trunk/Makefile

@@ -106,13 +106,12 @@ KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
 $(if $(KBUILD_OUTPUT),, \
      $(error output directory "$(saved-output)" does not exist))
 
-.PHONY: $(MAKECMDGOALS) cdbuilddir
-$(MAKECMDGOALS) _all: cdbuilddir
+.PHONY: $(MAKECMDGOALS)
 
-cdbuilddir:
+$(filter-out _all,$(MAKECMDGOALS)) _all:
 	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
 	KBUILD_SRC=$(CURDIR) \
-	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $(MAKECMDGOALS)
+	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
 
 # Leave processing to above invocation of make
 skip-makefile := 1

trunk/arch/arm/kernel/calls.S

@@ -111,7 +111,7 @@
 		CALL(sys_statfs)
 /* 100 */	CALL(sys_fstatfs)
 		CALL(sys_ni_syscall)
-		CALL(OBSOLETE(sys_socketcall))
+		CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall)))
 		CALL(sys_syslog)
 		CALL(sys_setitimer)
 /* 105 */	CALL(sys_getitimer)

trunk/arch/arm/kernel/setup.c

@@ -23,6 +23,7 @@
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
+#include <linux/smp.h>
 
 #include <asm/cpu.h>
 #include <asm/elf.h>
@@ -771,6 +772,10 @@ void __init setup_arch(char **cmdline_p)
 	paging_init(&meminfo, mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
+#ifdef CONFIG_SMP
+	smp_init_cpus();
+#endif
+
 	cpu_init();
 
 	/*

trunk/arch/arm/kernel/smp.c

@@ -338,7 +338,6 @@ void __init smp_prepare_boot_cpu(void)
 
 	per_cpu(cpu_data, cpu).idle = current;
 
-	cpu_set(cpu, cpu_possible_map);
 	cpu_set(cpu, cpu_present_map);
 	cpu_set(cpu, cpu_online_map);
 }

trunk/arch/arm/kernel/sys_oabi-compat.c

@@ -64,6 +64,7 @@
  * sys_connect:
  * sys_sendmsg:
  * sys_sendto:
+ * sys_socketcall:
  *
  *   struct sockaddr_un loses its padding with EABI.  Since the size of the
  *   structure is used as a validation test in unix_mkname(), we need to
@@ -78,6 +79,7 @@
 #include <linux/eventpoll.h>
 #include <linux/sem.h>
 #include <linux/socket.h>
+#include <linux/net.h>
 #include <asm/ipc.h>
 #include <asm/uaccess.h>
 
@@ -408,3 +410,31 @@ asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned fla
 	return sys_sendmsg(fd, msg, flags);
 }
 
+asmlinkage long sys_oabi_socketcall(int call, unsigned long __user *args)
+{
+	unsigned long r = -EFAULT, a[6];
+
+	switch (call) {
+	case SYS_BIND:
+		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
+			r = sys_oabi_bind(a[0], (struct sockaddr __user *)a[1], a[2]);
+		break;
+	case SYS_CONNECT:
+		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
+			r = sys_oabi_connect(a[0], (struct sockaddr __user *)a[1], a[2]);
+		break;
+	case SYS_SENDTO:
+		if (copy_from_user(a, args, 6 * sizeof(long)) == 0)
+			r = sys_oabi_sendto(a[0], (void __user *)a[1], a[2], a[3],
+					    (struct sockaddr __user *)a[4], a[5]);
+		break;
+	case SYS_SENDMSG:
+		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
+			r = sys_oabi_sendmsg(a[0], (struct msghdr __user *)a[1], a[2]);
+		break;
+	default:
+		r = sys_socketcall(call, args);
+	}
+
+	return r;
+}

trunk/arch/arm/mach-integrator/platsmp.c

@@ -140,6 +140,18 @@ static void __init poke_milo(void)
 	mb();
 }
 
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned int ncores = get_core_count();
@@ -176,14 +188,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		max_cpus = ncores;
 
 	/*
-	 * Initialise the possible/present maps.
-	 * cpu_possible_map describes the set of CPUs which may be present
-	 * cpu_present_map describes the set of CPUs populated
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
 	 */
-	for (i = 0; i < max_cpus; i++) {
-		cpu_set(i, cpu_possible_map);
+	for (i = 0; i < max_cpus; i++)
 		cpu_set(i, cpu_present_map);
-	}
 
 	/*
 	 * Do we need any more CPUs? If so, then let them know where

trunk/arch/arm/mach-iop3xx/iop321-setup.c

@@ -13,7 +13,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/config.h>
-#include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>

trunk/arch/arm/mach-iop3xx/iop331-setup.c

@@ -12,7 +12,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/config.h>
-#include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>

trunk/arch/arm/mach-ixp4xx/nslu2-setup.c

@@ -27,8 +27,6 @@ static struct flash_platform_data nslu2_flash_data = {
 };
 
 static struct resource nslu2_flash_resource = {
-	.start			= NSLU2_FLASH_BASE,
-	.end			= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
 	.flags			= IORESOURCE_MEM,
 };
 
@@ -116,6 +114,10 @@ static void __init nslu2_init(void)
 {
 	ixp4xx_sys_init();
 
+	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	nslu2_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
 	pm_power_off = nslu2_power_off;
 
 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));

trunk/arch/arm/mach-realview/platsmp.c

@@ -143,6 +143,18 @@ static void __init poke_milo(void)
 	mb();
 }
 
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned int ncores = get_core_count();
@@ -179,14 +191,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	local_timer_setup(cpu);
 
 	/*
-	 * Initialise the possible/present maps.
-	 * cpu_possible_map describes the set of CPUs which may be present
-	 * cpu_present_map describes the set of CPUs populated
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
 	 */
-	for (i = 0; i < max_cpus; i++) {
-		cpu_set(i, cpu_possible_map);
+	for (i = 0; i < max_cpus; i++)
 		cpu_set(i, cpu_present_map);
-	}
 
 	/*
 	 * Do we need any more CPUs? If so, then let them know where

trunk/arch/arm/plat-omap/pm.c

@@ -38,7 +38,6 @@
 #include <linux/pm.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
-#include <linux/pm.h>
 #include <linux/interrupt.h>
 
 #include <asm/io.h>

trunk/arch/i386/kernel/cpu/transmeta.c

@@ -1,4 +1,5 @@
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/msr.h>

trunk/arch/x86_64/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1-git2
-# Thu Jan 19 10:05:21 2006
+# Linux kernel version: 2.6.16-rc3
+# Mon Feb 13 22:31:24 2006
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -21,7 +21,6 @@ CONFIG_DMI=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -267,6 +266,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -446,7 +446,6 @@ CONFIG_BLK_DEV_PIIX=y
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
@@ -573,7 +572,33 @@ CONFIG_FUSION_MAX_SGE=128
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
+CONFIG_IEEE1394=y
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+
+#
+# Texas Instruments PCILynx requires I2C
+#
+CONFIG_IEEE1394_OHCI1394=y
+
+#
+# Protocol Drivers
+#
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE1394_SBP2 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394_DV1394 is not set
+CONFIG_IEEE1394_RAWIO=y
 
 #
 # I2O device support
@@ -772,6 +797,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -871,6 +897,7 @@ CONFIG_HPET_MMAP=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_HDAPS is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -1101,7 +1128,6 @@ CONFIG_USB_MON=y
 # EDAC - error detection and reporting (RAS)
 #
 # CONFIG_EDAC is not set
-# CONFIG_EDAC_POLL is not set
 
 #
 # Firmware Drivers
@@ -1291,14 +1317,12 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_FORCED_INLINING is not set
-# CONFIG_UNWIND_INFO is not set
 # CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_INIT_DEBUG=y
 # CONFIG_DEBUG_RODATA is not set
 # CONFIG_IOMMU_DEBUG is not set
 

trunk/arch/x86_64/kernel/apic.c

@@ -1152,6 +1152,7 @@ __setup("noapicmaintimer", setup_noapicmaintimer);
 static __init int setup_apicpmtimer(char *s)
 {
 	apic_calibrate_pmtmr = 1;
+	notsc_setup(NULL);
 	return setup_apicmaintimer(NULL);
 }
 __setup("apicpmtimer", setup_apicpmtimer);

trunk/arch/x86_64/kernel/entry.S

@@ -554,6 +554,7 @@ iret_label:
 	/* running with kernel gs */
 bad_iret:
 	movq $-9999,%rdi	/* better code? */
+	sti
 	jmp do_exit			
 	.previous