Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  r8169: avoid losing MSI interrupts
  tcp: tcp_vegas ssthresh bugfix
  mac8390: fix regression caused during net_device_ops conversion
  gianfar: fix BUG under load after introduction of skb recycling
  wimax/i2400m: usb: fix device reset on autosuspend while not yet idle
  RxRPC: Error handling for rxrpc_alloc_connection()
  ipv4: Fix oops with FIB_TRIE
  pktgen: do not access flows[] beyond its length
  gigaset: beyond ARRAY_SIZE of iwb->data
  IPv6: set RTPROT_KERNEL to initial route
  net: fix rtable leak in net/ipv4/route.c
  net: fix length computation in rt_check_expire()
  wireless: beyond ARRAY_SIZE of intf->crypto_stats
  iwlwifi: update 5000 ucode support to version 2 of API
  cfg80211: fix race between core hint and driver's custom apply
  airo: fix airo_get_encode{,ext} buffer overflow like I mean it...
  ath5k: fix interpolation with equal power levels
  iwlwifi: do not cancel delayed work inside spin_lock_irqsave
  ath5k: fix exp off-by-one when computing OFDM delta slope
  wext: verify buffer size for SIOCSIWENCODEEXT
  ...

drivers/isdn/gigaset/isocdata.c

@@ -175,7 +175,7 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size)
 		return -EINVAL;
 	}
 	src = iwb->read;
-	if (unlikely(limit > BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
+	if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
 		     (read < src && limit >= src))) {
 		pr_err("isoc write buffer frame reservation violated\n");
 		return -EFAULT;

drivers/net/Makefile

@@ -102,7 +102,7 @@ obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_SEEQ8005) += seeq8005.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
+obj-$(CONFIG_MAC8390) += mac8390.o
 obj-$(CONFIG_APNE) += apne.o 8390.o
 obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
 obj-$(CONFIG_HP100) += hp100.o

drivers/net/gianfar.c

@@ -1885,8 +1885,17 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
 
 			if (unlikely(!newskb))
 				newskb = skb;
-			else if (skb)
+			else if (skb) {
+				/*
+				 * We need to reset ->data to what it
+				 * was before gfar_new_skb() re-aligned
+				 * it to an RXBUF_ALIGNMENT boundary
+				 * before we put the skb back on the
+				 * recycle list.
+				 */
+				skb->data = skb->head + NET_SKB_PAD;
 				__skb_queue_head(&priv->rx_recycle, skb);
+			}
 		} else {
 			/* Increment the number of packets */
 			dev->stats.rx_packets++;

drivers/net/mac8390.c

@@ -304,7 +304,7 @@ struct net_device * __init mac8390_probe(int unit)
 	if (!MACH_IS_MAC)
 		return ERR_PTR(-ENODEV);
 
-	dev = alloc_ei_netdev();
+	dev = ____alloc_ei_netdev(0);
 	if (!dev)
 		return ERR_PTR(-ENOMEM);
 
@@ -481,10 +481,10 @@ void cleanup_module(void)
 static const struct net_device_ops mac8390_netdev_ops = {
 	.ndo_open 		= mac8390_open,
 	.ndo_stop		= mac8390_close,
-	.ndo_start_xmit		= ei_start_xmit,
-	.ndo_tx_timeout		= ei_tx_timeout,
-	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_start_xmit		= __ei_start_xmit,
+	.ndo_tx_timeout		= __ei_tx_timeout,
+	.ndo_get_stats		= __ei_get_stats,
+	.ndo_set_multicast_list = __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,

drivers/net/r8169.c

@@ -3554,54 +3554,64 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 	int handled = 0;
 	int status;
 
+	/* loop handling interrupts until we have no new ones or
+	 * we hit a invalid/hotplug case.
+	 */
 	status = RTL_R16(IntrStatus);
+	while (status && status != 0xffff) {
+		handled = 1;
 
-	/* hotplug/major error/no more work/shared irq */
-	if ((status == 0xffff) || !status)
-		goto out;
-
-	handled = 1;
+		/* Handle all of the error cases first. These will reset
+		 * the chip, so just exit the loop.
+		 */
+		if (unlikely(!netif_running(dev))) {
+			rtl8169_asic_down(ioaddr);
+			break;
+		}
 
-	if (unlikely(!netif_running(dev))) {
-		rtl8169_asic_down(ioaddr);
-		goto out;
-	}
+		/* Work around for rx fifo overflow */
+		if (unlikely(status & RxFIFOOver) &&
+		(tp->mac_version == RTL_GIGA_MAC_VER_11)) {
+			netif_stop_queue(dev);
+			rtl8169_tx_timeout(dev);
+			break;
+		}
 
-	status &= tp->intr_mask;
-	RTL_W16(IntrStatus,
-		(status & RxFIFOOver) ? (status | RxOverflow) : status);
+		if (unlikely(status & SYSErr)) {
+			rtl8169_pcierr_interrupt(dev);
+			break;
+		}
 
-	if (!(status & tp->intr_event))
-		goto out;
+		if (status & LinkChg)
+			rtl8169_check_link_status(dev, tp, ioaddr);
 
-	/* Work around for rx fifo overflow */
-	if (unlikely(status & RxFIFOOver) &&
-	    (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
-		netif_stop_queue(dev);
-		rtl8169_tx_timeout(dev);
-		goto out;
-	}
+		/* We need to see the lastest version of tp->intr_mask to
+		 * avoid ignoring an MSI interrupt and having to wait for
+		 * another event which may never come.
+		 */
+		smp_rmb();
+		if (status & tp->intr_mask & tp->napi_event) {
+			RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+			tp->intr_mask = ~tp->napi_event;
+
+			if (likely(napi_schedule_prep(&tp->napi)))
+				__napi_schedule(&tp->napi);
+			else if (netif_msg_intr(tp)) {
+				printk(KERN_INFO "%s: interrupt %04x in poll\n",
+				dev->name, status);
+			}
+		}
 
-	if (unlikely(status & SYSErr)) {
-		rtl8169_pcierr_interrupt(dev);
-		goto out;
+		/* We only get a new MSI interrupt when all active irq
+		 * sources on the chip have been acknowledged. So, ack
+		 * everything we've seen and check if new sources have become
+		 * active to avoid blocking all interrupts from the chip.
+		 */
+		RTL_W16(IntrStatus,
+			(status & RxFIFOOver) ? (status | RxOverflow) : status);
+		status = RTL_R16(IntrStatus);
 	}
 
-	if (status & LinkChg)
-		rtl8169_check_link_status(dev, tp, ioaddr);
-
-	if (status & tp->napi_event) {
-		RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
-		tp->intr_mask = ~tp->napi_event;
-
-		if (likely(napi_schedule_prep(&tp->napi)))
-			__napi_schedule(&tp->napi);
-		else if (netif_msg_intr(tp)) {
-			printk(KERN_INFO "%s: interrupt %04x in poll\n",
-			       dev->name, status);
-		}
-	}
-out:
 	return IRQ_RETVAL(handled);
 }
 
@@ -3617,13 +3627,15 @@ static int rtl8169_poll(struct napi_struct *napi, int budget)
 
 	if (work_done < budget) {
 		napi_complete(napi);
-		tp->intr_mask = 0xffff;
-		/*
-		 * 20040426: the barrier is not strictly required but the
-		 * behavior of the irq handler could be less predictable
-		 * without it. Btw, the lack of flush for the posted pci
-		 * write is safe - FR
+
+		/* We need for force the visibility of tp->intr_mask
+		 * for other CPUs, as we can loose an MSI interrupt
+		 * and potentially wait for a retransmit timeout if we don't.
+		 * The posted write to IntrMask is safe, as it will
+		 * eventually make it to the chip and we won't loose anything
+		 * until it does.
 		 */
+		tp->intr_mask = 0xffff;
 		smp_wmb();
 		RTL_W16(IntrMask, tp->intr_event);
 	}

drivers/net/wimax/i2400m/usb.c

@@ -505,27 +505,52 @@ int i2400mu_suspend(struct usb_interface *iface, pm_message_t pm_msg)
 #ifdef CONFIG_PM
 	struct usb_device *usb_dev = i2400mu->usb_dev;
 #endif
+	unsigned is_autosuspend = 0;
 	struct i2400m *i2400m = &i2400mu->i2400m;
 
+#ifdef CONFIG_PM
+	if (usb_dev->auto_pm > 0)
+		is_autosuspend = 1;
+#endif
+
 	d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event);
 	if (i2400m->updown == 0)
 		goto no_firmware;
-	d_printf(1, dev, "fw up, requesting standby\n");
+	if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) {
+		/* ugh -- the device is connected and this suspend
+		 * request is an autosuspend one (not a system standby
+		 * / hibernate).
+		 *
+		 * The only way the device can go to standby is if the
+		 * link with the base station is in IDLE mode; that
+		 * were the case, we'd be in status
+		 * I2400M_SS_CONNECTED_IDLE. But we are not.
+		 *
+		 * If we *tell* him to go power save now, it'll reset
+		 * as a precautionary measure, so if this is an
+		 * autosuspend thing, say no and it'll come back
+		 * later, when the link is IDLE
+		 */
+		result = -EBADF;
+		d_printf(1, dev, "fw up, link up, not-idle, autosuspend: "
+			 "not entering powersave\n");
+		goto error_not_now;
+	}
+	d_printf(1, dev, "fw up: entering powersave\n");
 	atomic_dec(&i2400mu->do_autopm);
 	result = i2400m_cmd_enter_powersave(i2400m);
 	atomic_inc(&i2400mu->do_autopm);
-#ifdef CONFIG_PM
-	if (result < 0 && usb_dev->auto_pm == 0) {
+	if (result < 0 && !is_autosuspend) {
 		/* System suspend, can't fail */
 		dev_err(dev, "failed to suspend, will reset on resume\n");
 		result = 0;
 	}
-#endif
 	if (result < 0)
 		goto error_enter_powersave;
 	i2400mu_notification_release(i2400mu);
-	d_printf(1, dev, "fw up, got standby\n");
+	d_printf(1, dev, "powersave requested\n");
 error_enter_powersave:
+error_not_now:
 no_firmware:
 	d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n",
 		iface, pm_msg.event, result);

drivers/net/wireless/airo.c

@@ -6467,6 +6467,7 @@ static int airo_get_encode(struct net_device *dev,
 {
 	struct airo_info *local = dev->ml_priv;
 	int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+	int wep_key_len;
 	u8 buf[16];
 
 	if (!local->wep_capable)
@@ -6500,11 +6501,13 @@ static int airo_get_encode(struct net_device *dev,
 	dwrq->flags |= index + 1;
 
 	/* Copy the key to the user buffer */
-	dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf));
-	if (dwrq->length != -1)
-		memcpy(extra, buf, dwrq->length);
-	else
+	wep_key_len = get_wep_key(local, index, &buf[0], sizeof(buf));
+	if (wep_key_len < 0) {
 		dwrq->length = 0;
+	} else {
+		dwrq->length = wep_key_len;
+		memcpy(extra, buf, dwrq->length);
+	}
 
 	return 0;
 }
@@ -6617,7 +6620,7 @@ static int airo_get_encodeext(struct net_device *dev,
 	struct airo_info *local = dev->ml_priv;
 	struct iw_point *encoding = &wrqu->encoding;
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, max_key_len;
+	int idx, max_key_len, wep_key_len;
 	u8 buf[16];
 
 	if (!local->wep_capable)
@@ -6661,11 +6664,13 @@ static int airo_get_encodeext(struct net_device *dev,
 	memset(extra, 0, 16);
 
 	/* Copy the key to the user buffer */
-	ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
-	if (ext->key_len != -1)
-		memcpy(extra, buf, ext->key_len);
-	else
+	wep_key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
+	if (wep_key_len < 0) {
 		ext->key_len = 0;
+	} else {
+		ext->key_len = wep_key_len;
+		memcpy(extra, buf, ext->key_len);
+	}
 
 	return 0;
 }

drivers/net/wireless/ath5k/phy.c

@@ -1487,28 +1487,35 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
 {
 	s8 tmp;
 	s16 min_pwrL, min_pwrR;
-	s16 pwr_i = pwrL[0];
-
-	do {
-		pwr_i--;
-		tmp = (s8) ath5k_get_interpolated_value(pwr_i,
-						pwrL[0], pwrL[1],
-						stepL[0], stepL[1]);
-
-	} while (tmp > 1);
-
-	min_pwrL = pwr_i;
-
-	pwr_i = pwrR[0];
-	do {
-		pwr_i--;
-		tmp = (s8) ath5k_get_interpolated_value(pwr_i,
-						pwrR[0], pwrR[1],
-						stepR[0], stepR[1]);
-
-	} while (tmp > 1);
+	s16 pwr_i;
+
+	if (pwrL[0] == pwrL[1])
+		min_pwrL = pwrL[0];
+	else {
+		pwr_i = pwrL[0];
+		do {
+			pwr_i--;
+			tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+							pwrL[0], pwrL[1],
+							stepL[0], stepL[1]);
+		} while (tmp > 1);
+
+		min_pwrL = pwr_i;
+	}
 
-	min_pwrR = pwr_i;
+	if (pwrR[0] == pwrR[1])
+		min_pwrR = pwrR[0];
+	else {
+		pwr_i = pwrR[0];
+		do {
+			pwr_i--;
+			tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+							pwrR[0], pwrR[1],
+							stepR[0], stepR[1]);
+		} while (tmp > 1);
+
+		min_pwrR = pwr_i;
+	}
 
 	/* Keep the right boundary so that it works for both curves */
 	return max(min_pwrL, min_pwrR);

drivers/net/wireless/ath5k/reset.c

@@ -26,7 +26,7 @@
 \*****************************/
 
 #include <linux/pci.h> 		/* To determine if a card is pci-e */
-#include <linux/bitops.h>	/* For get_bitmask_order */
+#include <linux/log2.h>
 #include "ath5k.h"
 #include "reg.h"
 #include "base.h"
@@ -69,10 +69,10 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
 
 	/* Get exponent
 	 * ALGO: coef_exp = 14 - highest set bit position */
-	coef_exp = get_bitmask_order(coef_scaled);
+	coef_exp = ilog2(coef_scaled);
 
 	/* Doesn't make sense if it's zero*/
-	if (!coef_exp)
+	if (!coef_scaled || !coef_exp)
 		return -EINVAL;
 
 	/* Note: we've shifted coef_scaled by 24 */
@@ -359,7 +359,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
 
 			if (ah->ah_radio == AR5K_RF5413)
-				clock |= AR5K_PHY_PLL_40MHZ_5413;
+				clock = AR5K_PHY_PLL_40MHZ_5413;
 			else
 				clock |= AR5K_PHY_PLL_40MHZ;
 

drivers/net/wireless/iwlwifi/iwl-5000.c

@@ -46,7 +46,7 @@
 #include "iwl-6000-hw.h"
 
 /* Highest firmware API version supported */
-#define IWL5000_UCODE_API_MAX 1
+#define IWL5000_UCODE_API_MAX 2
 #define IWL5150_UCODE_API_MAX 2
 
 /* Lowest firmware API version supported */