---

yaml
---
r: 377387
b: refs/heads/master
c: 6bb7aab
h: refs/heads/master
i:
  377385: 3b4d301
  377383: 318451e
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 795d855d56c6d172f50a974f603ba923ac93ee76
+refs/heads/master: 6bb7aabf73401c9cfca26c71ccae1e3d6e1640d5

trunk/drivers/bcma/scan.c

@@ -84,6 +84,8 @@ static const struct bcma_device_id_name bcma_bcm_device_names[] = {
 	{ BCMA_CORE_I2S, "I2S" },
 	{ BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
 	{ BCMA_CORE_SHIM, "SHIM" },
+	{ BCMA_CORE_PCIE2, "PCIe Gen2" },
+	{ BCMA_CORE_ARM_CR4, "ARM CR4" },
 	{ BCMA_CORE_DEFAULT, "Default" },
 };
 

trunk/drivers/bluetooth/Kconfig

@@ -201,7 +201,7 @@ config BT_MRVL
 	  The core driver to support Marvell Bluetooth devices.
 
 	  This driver is required if you want to support
-	  Marvell Bluetooth devices, such as 8688/8787/8797.
+	  Marvell Bluetooth devices, such as 8688/8787/8797/8897.
 
 	  Say Y here to compile Marvell Bluetooth driver
 	  into the kernel or say M to compile it as module.
@@ -214,7 +214,7 @@ config BT_MRVL_SDIO
 	  The driver for Marvell Bluetooth chipsets with SDIO interface.
 
 	  This driver is required if you want to use Marvell Bluetooth
-	  devices with SDIO interface. Currently SD8688/SD8787/SD8797
+	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897
 	  chipsets are supported.
 
 	  Say Y here to compile support for Marvell BT-over-SDIO driver

trunk/drivers/bluetooth/btmrvl_sdio.c

@@ -82,6 +82,23 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
 	.io_port_2 = 0x7a,
 };
 
+static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
+	.cfg = 0x00,
+	.host_int_mask = 0x02,
+	.host_intstatus = 0x03,
+	.card_status = 0x50,
+	.sq_read_base_addr_a0 = 0x60,
+	.sq_read_base_addr_a1 = 0x61,
+	.card_revision = 0xbc,
+	.card_fw_status0 = 0xc0,
+	.card_fw_status1 = 0xc1,
+	.card_rx_len = 0xc2,
+	.card_rx_unit = 0xc3,
+	.io_port_0 = 0xd8,
+	.io_port_1 = 0xd9,
+	.io_port_2 = 0xda,
+};
+
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
@@ -103,6 +120,13 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.sd_blksz_fw_dl	= 256,
 };
 
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8897_uapsta.bin",
+	.reg		= &btmrvl_reg_88xx,
+	.sd_blksz_fw_dl	= 256,
+};
+
 static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8688 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
@@ -116,6 +140,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8797 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
 			.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
+	/* Marvell SD8897 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd8897 },
 
 	{ }	/* Terminating entry */
 };
@@ -1194,3 +1221,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
 MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");

trunk/drivers/net/wireless/ath/ath9k/Kconfig

@@ -17,7 +17,7 @@ config ATH9K_BTCOEX_SUPPORT
 
 config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
-	depends on MAC80211
+	depends on MAC80211 && HAS_DMA
 	select ATH9K_HW
 	select MAC80211_LEDS
 	select LEDS_CLASS
@@ -92,13 +92,17 @@ config ATH9K_MAC_DEBUG
 	  This option enables collection of statistics for Rx/Tx status
 	  data and some other MAC related statistics
 
-config ATH9K_RATE_CONTROL
+config ATH9K_LEGACY_RATE_CONTROL
 	bool "Atheros ath9k rate control"
 	depends on ATH9K
-	default y
+	default n
 	---help---
 	  Say Y, if you want to use the ath9k specific rate control
-	  module instead of minstrel_ht.
+	  module instead of minstrel_ht. Be warned that there are various
+	  issues with the ath9k RC and minstrel is a more robust algorithm.
+	  Note that even if this option is selected, "ath9k_rate_control"
+	  has to be passed to mac80211 using the module parameter,
+	  ieee80211_default_rc_algo.
 
 config ATH9K_HTC
        tristate "Atheros HTC based wireless cards support"

trunk/drivers/net/wireless/ath/ath9k/Makefile

@@ -8,7 +8,7 @@ ath9k-y +=	beacon.o \
 		antenna.o
 
 ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
-ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o
+ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
 ath9k-$(CONFIG_ATH9K_PCI) += pci.o
 ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
 ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o

trunk/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h

@@ -958,11 +958,11 @@ static const u32 ar9300Common_rx_gain_table_2p2[][2] = {
 	{0x0000a074, 0x00000000},
 	{0x0000a078, 0x00000000},
 	{0x0000a07c, 0x00000000},
-	{0x0000a080, 0x1a1a1a1a},
-	{0x0000a084, 0x1a1a1a1a},
-	{0x0000a088, 0x1a1a1a1a},
-	{0x0000a08c, 0x1a1a1a1a},
-	{0x0000a090, 0x171a1a1a},
+	{0x0000a080, 0x22222229},
+	{0x0000a084, 0x1d1d1d1d},
+	{0x0000a088, 0x1d1d1d1d},
+	{0x0000a08c, 0x1d1d1d1d},
+	{0x0000a090, 0x171d1d1d},
 	{0x0000a094, 0x11111717},
 	{0x0000a098, 0x00030311},
 	{0x0000a09c, 0x00000000},

trunk/drivers/net/wireless/ath/ath9k/ar9003_calib.c

@@ -965,7 +965,7 @@ static void ar9003_hw_do_manual_peak_cal(struct ath_hw *ah,
 {
 	int i;
 
-	if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah))
+	if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah))
 		return;
 
 	for (i = 0; i < AR9300_MAX_CHAINS; i++) {

trunk/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h

@@ -68,13 +68,16 @@
 #define AR9300_BASE_ADDR 0x3ff
 #define AR9300_BASE_ADDR_512 0x1ff
 
-#define AR9300_OTP_BASE			(AR_SREV_9340(ah) ? 0x30000 : 0x14000)
-#define AR9300_OTP_STATUS		(AR_SREV_9340(ah) ? 0x30018 : 0x15f18)
+#define AR9300_OTP_BASE \
+		((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000)
+#define AR9300_OTP_STATUS \
+		((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18)
 #define AR9300_OTP_STATUS_TYPE		0x7
 #define AR9300_OTP_STATUS_VALID		0x4
 #define AR9300_OTP_STATUS_ACCESS_BUSY	0x2
 #define AR9300_OTP_STATUS_SM_BUSY	0x1
-#define AR9300_OTP_READ_DATA		(AR_SREV_9340(ah) ? 0x3001c : 0x15f1c)
+#define AR9300_OTP_READ_DATA \
+		((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c)
 
 enum targetPowerHTRates {
 	HT_TARGET_RATE_0_8_16,

trunk/drivers/net/wireless/ath/ath9k/ar9003_phy.c

@@ -334,7 +334,8 @@ static void ar9003_hw_spur_ofdm(struct ath_hw *ah,
 	REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
 		      AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 1);
 
-	if (REG_READ_FIELD(ah, AR_PHY_MODE,
+	if (!AR_SREV_9340(ah) &&
+	    REG_READ_FIELD(ah, AR_PHY_MODE,
 			   AR_PHY_MODE_DYNAMIC) == 0x1)
 		REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
 			      AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 1);

trunk/drivers/net/wireless/ath/ath9k/ar9485_initvals.h

@@ -1020,7 +1020,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
 	{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
 	{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
 	{0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
 	{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
 	{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},

trunk/drivers/net/wireless/ath/ath9k/ath9k.h

@@ -251,9 +251,9 @@ struct ath_atx_tid {
 	int tidno;
 	int baw_head;   /* first un-acked tx buffer */
 	int baw_tail;   /* next unused tx buffer slot */
-	int sched;
-	int paused;
-	u8 state;
+	bool sched;
+	bool paused;
+	bool active;
 };
 
 struct ath_node {
@@ -274,10 +274,6 @@ struct ath_node {
 #endif
 };
 
-#define AGGR_CLEANUP         BIT(1)
-#define AGGR_ADDBA_COMPLETE  BIT(2)
-#define AGGR_ADDBA_PROGRESS  BIT(3)
-
 struct ath_tx_control {
 	struct ath_txq *txq;
 	struct ath_node *an;

trunk/drivers/net/wireless/ath/ath9k/debug.c

@@ -2008,6 +2008,14 @@ void ath9k_get_et_stats(struct ieee80211_hw *hw,
 	WARN_ON(i != ATH9K_SSTATS_LEN);
 }
 
+void ath9k_deinit_debug(struct ath_softc *sc)
+{
+	if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) {
+		relay_close(sc->rfs_chan_spec_scan);
+		sc->rfs_chan_spec_scan = NULL;
+	}
+}
+
 int ath9k_init_debug(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);

trunk/drivers/net/wireless/ath/ath9k/debug.h

@@ -304,6 +304,7 @@ struct ath9k_debug {
 };
 
 int ath9k_init_debug(struct ath_hw *ah);
+void ath9k_deinit_debug(struct ath_softc *sc);
 
 void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
 void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf,
@@ -339,6 +340,10 @@ static inline int ath9k_init_debug(struct ath_hw *ah)
 	return 0;
 }
 
+static inline void ath9k_deinit_debug(struct ath_softc *sc)
+{
+}
+
 static inline void ath_debug_stat_interrupt(struct ath_softc *sc,
 					    enum ath9k_int status)
 {

trunk/drivers/net/wireless/ath/ath9k/hw.c

@@ -1172,6 +1172,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan)
 static inline void ath9k_hw_set_dma(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
+	int txbuf_size;
 
 	ENABLE_REGWRITE_BUFFER(ah);
 
@@ -1225,13 +1226,17 @@ static inline void ath9k_hw_set_dma(struct ath_hw *ah)
 		 * So set the usable tx buf size also to half to
 		 * avoid data/delimiter underruns
 		 */
-		REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
-			  AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE);
-	} else if (!AR_SREV_9271(ah)) {
-		REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
-			  AR_PCU_TXBUF_CTRL_USABLE_SIZE);
+		txbuf_size = AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE;
+	} else if (AR_SREV_9340_13_OR_LATER(ah)) {
+		/* Uses fewer entries for AR934x v1.3+ to prevent rx overruns */
+		txbuf_size = AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE;
+	} else {
+		txbuf_size = AR_PCU_TXBUF_CTRL_USABLE_SIZE;
 	}
 
+	if (!AR_SREV_9271(ah))
+		REG_WRITE(ah, AR_PCU_TXBUF_CTRL, txbuf_size);
+
 	REGWRITE_BUFFER_FLUSH(ah);
 
 	if (AR_SREV_9300_20_OR_LATER(ah))
@@ -1306,9 +1311,13 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type)
 			AR_RTC_RC_COLD_RESET | AR_RTC_RC_WARM_RESET;
 	} else {
 		tmpReg = REG_READ(ah, AR_INTR_SYNC_CAUSE);
-		if (tmpReg &
-		    (AR_INTR_SYNC_LOCAL_TIMEOUT |
-		     AR_INTR_SYNC_RADM_CPL_TIMEOUT)) {
+		if (AR_SREV_9340(ah))
+			tmpReg &= AR9340_INTR_SYNC_LOCAL_TIMEOUT;
+		else
+			tmpReg &= AR_INTR_SYNC_LOCAL_TIMEOUT |
+				  AR_INTR_SYNC_RADM_CPL_TIMEOUT;
+
+		if (tmpReg) {
 			u32 val;
 			REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
 

trunk/drivers/net/wireless/ath/ath9k/init.c

@@ -787,8 +787,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	hw->wiphy->iface_combinations = if_comb;
 	hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
 
-	if (AR_SREV_5416(sc->sc_ah))
-		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
@@ -830,10 +829,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	sc->ant_rx = hw->wiphy->available_antennas_rx;
 	sc->ant_tx = hw->wiphy->available_antennas_tx;
 
-#ifdef CONFIG_ATH9K_RATE_CONTROL
-	hw->rate_control_algorithm = "ath9k_rate_control";
-#endif
-
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 			&sc->sbands[IEEE80211_BAND_2GHZ];
@@ -906,14 +901,16 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc,
 	if (!ath_is_world_regd(reg)) {
 		error = regulatory_hint(hw->wiphy, reg->alpha2);
 		if (error)
-			goto unregister;
+			goto debug_cleanup;
 	}
 
 	ath_init_leds(sc);
 	ath_start_rfkill_poll(sc);
 
 	return 0;
 
+debug_cleanup:
+	ath9k_deinit_debug(sc);
 unregister:
 	ieee80211_unregister_hw(hw);
 rx_cleanup:
@@ -942,11 +939,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc)
 		sc->dfs_detector->exit(sc->dfs_detector);
 
 	ath9k_eeprom_release(sc);
-
-	if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) {
-		relay_close(sc->rfs_chan_spec_scan);
-		sc->rfs_chan_spec_scan = NULL;
-	}
 }
 
 void ath9k_deinit_device(struct ath_softc *sc)
@@ -960,6 +952,7 @@ void ath9k_deinit_device(struct ath_softc *sc)
 
 	ath9k_ps_restore(sc);
 
+	ath9k_deinit_debug(sc);
 	ieee80211_unregister_hw(hw);
 	ath_rx_cleanup(sc);
 	ath9k_deinit_softc(sc);

trunk/drivers/net/wireless/ath/ath9k/mac.c

@@ -410,7 +410,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 
 	REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ);
 
-	if (AR_SREV_9340(ah))
+	if (AR_SREV_9340(ah) && !AR_SREV_9340_13_OR_LATER(ah))
 		REG_WRITE(ah, AR_DMISC(q),
 			  AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1);
 	else

trunk/drivers/net/wireless/ath/ath9k/main.c

@@ -1687,6 +1687,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 			      u16 tid, u16 *ssn, u8 buf_size)
 {
 	struct ath_softc *sc = hw->priv;
+	bool flush = false;
 	int ret = 0;
 
 	local_bh_disable();
@@ -1703,12 +1704,14 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 			ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 		ath9k_ps_restore(sc);
 		break;
-	case IEEE80211_AMPDU_TX_STOP_CONT:
 	case IEEE80211_AMPDU_TX_STOP_FLUSH:
 	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+		flush = true;
+	case IEEE80211_AMPDU_TX_STOP_CONT:
 		ath9k_ps_wakeup(sc);
 		ath_tx_aggr_stop(sc, sta, tid);
-		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		if (!flush)
+			ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 		ath9k_ps_restore(sc);
 		break;
 	case IEEE80211_AMPDU_TX_OPERATIONAL:

trunk/drivers/net/wireless/ath/ath9k/rc.c

@@ -1227,10 +1227,7 @@ static bool ath_tx_aggr_check(struct ath_softc *sc, struct ieee80211_sta *sta,
 		return false;
 
 	txtid = ATH_AN_2_TID(an, tidno);
-
-	if (!(txtid->state & (AGGR_ADDBA_COMPLETE | AGGR_ADDBA_PROGRESS)))
-			return true;
-	return false;
+	return !txtid->active;
 }