---

yaml
---
r: 276006
b: refs/heads/master
c: f02877c
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 24ca9a847791fd53d9b217330b15f3c285827a18
+refs/heads/master: f02877ce3ca8f87a086e3fc98bb9e022bbec70ec

trunk/Documentation/i2c/ten-bit-addresses

@@ -1,22 +1,24 @@
 The I2C protocol knows about two kinds of device addresses: normal 7 bit
 addresses, and an extended set of 10 bit addresses. The sets of addresses
 do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
-address 0x10 (though a single device could respond to both of them). You
-select a 10 bit address by adding an extra byte after the address
-byte:
-  S Addr7 Rd/Wr ....
-becomes
-  S 11110 Addr10 Rd/Wr
-S is the start bit, Rd/Wr the read/write bit, and if you count the number
-of bits, you will see the there are 8 after the S bit for 7 bit addresses,
-and 16 after the S bit for 10 bit addresses.
+address 0x10 (though a single device could respond to both of them).
 
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are
-several places in the code that will cause SEVERE PROBLEMS with 10 bit
-addresses, even though there is some basic handling and hooks. Also,
-almost no supported adapter handles the 10 bit addresses correctly.
+I2C messages to and from 10-bit address devices have a different format.
+See the I2C specification for the details.
 
-As soon as a real 10 bit address device is spotted 'in the wild', we
-can and will add proper support. Right now, 10 bit address devices
-are defined by the I2C protocol, but we have never seen a single device
-which supports them.
+The current 10 bit address support is minimal. It should work, however
+you can expect some problems along the way:
+* Not all bus drivers support 10-bit addresses. Some don't because the
+  hardware doesn't support them (SMBus doesn't require 10-bit address
+  support for example), some don't because nobody bothered adding the
+  code (or it's there but not working properly.) Software implementation
+  (i2c-algo-bit) is known to work.
+* Some optional features do not support 10-bit addresses. This is the
+  case of automatic detection and instantiation of devices by their,
+  drivers, for example.
+* Many user-space packages (for example i2c-tools) lack support for
+  10-bit addresses.
+
+Note that 10-bit address devices are still pretty rare, so the limitations
+listed above could stay for a long time, maybe even forever if nobody
+needs them to be fixed.

trunk/MAINTAINERS

@@ -5667,7 +5667,6 @@ F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Jassi Brar <jassisinghbrar@gmail.com>
 M:	Sangbeom Kim <sbkim73@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

trunk/arch/powerpc/boot/dts/p1023rds.dts

@@ -449,6 +449,7 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/* IRQ[0:3] are pulled up on board, set to active-low */
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 0 1
@@ -488,11 +489,15 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/*
+			 * IRQ[4:6] only for PCIe, set to active-high,
+			 * IRQ[7] is pulled up on board, set to active-low
+			 */
 			interrupt-map = <
 				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 1
-				0000 0 0 2 &mpic 5 1
-				0000 0 0 3 &mpic 6 1
+				0000 0 0 1 &mpic 4 2
+				0000 0 0 2 &mpic 5 2
+				0000 0 0 3 &mpic 6 2
 				0000 0 0 4 &mpic 7 1
 				>;
 			ranges = <0x2000000 0x0 0xa0000000
@@ -527,12 +532,16 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/*
+			 * IRQ[8:10] are pulled up on board, set to active-low
+			 * IRQ[11] only for PCIe, set to active-high,
+			 */
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 8 1
 				0000 0 0 2 &mpic 9 1
 				0000 0 0 3 &mpic 10 1
-				0000 0 0 4 &mpic 11 1
+				0000 0 0 4 &mpic 11 2
 				>;
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000

trunk/arch/powerpc/configs/ppc44x_defconfig

@@ -52,6 +52,8 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_NDFC=m
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_PROC_DEVICETREE=y

trunk/arch/powerpc/mm/hugetlbpage.c

@@ -15,6 +15,7 @@
 #include <linux/of_fdt.h>
 #include <linux/memblock.h>
 #include <linux/bootmem.h>
+#include <linux/moduleparam.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>

trunk/arch/powerpc/platforms/85xx/Kconfig

@@ -203,7 +203,7 @@ config P3060_QDS
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help

trunk/arch/powerpc/platforms/85xx/p3060_qds.c

@@ -70,7 +70,7 @@ define_machine(p3060_qds) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p3060_qds, declare_of_platform_devices);
+machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);

trunk/arch/powerpc/sysdev/ehv_pic.c

@@ -280,6 +280,7 @@ void __init ehv_pic_init(void)
 
 	if (!ehv_pic->irqhost) {
 		of_node_put(np);
+		kfree(ehv_pic);
 		return;
 	}
 

trunk/arch/powerpc/sysdev/fsl_lbc.c

@@ -328,6 +328,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev)
 err:
 	iounmap(fsl_lbc_ctrl_dev->regs);
 	kfree(fsl_lbc_ctrl_dev);
+	fsl_lbc_ctrl_dev = NULL;
 	return ret;
 }
 

trunk/arch/powerpc/sysdev/qe_lib/qe.c

@@ -216,7 +216,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
 	/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
 	   that the BRG divisor must be even if you're not using divide-by-16
 	   mode. */
-	if (!div16 && (divisor & 1))
+	if (!div16 && (divisor & 1) && (divisor > 3))
 		divisor++;
 
 	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |

trunk/drivers/ata/ahci_platform.c

@@ -67,7 +67,7 @@ static int __init ahci_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct ata_port_info pi = ahci_port_info[id->driver_data];
+	struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct ahci_host_priv *hpriv;
 	struct ata_host *host;

trunk/drivers/ata/libata-sff.c

@@ -2533,21 +2533,25 @@ static int ata_pci_init_one(struct pci_dev *pdev,
 	if (rc)
 		goto out;
 
+#ifdef CONFIG_ATA_BMDMA
 	if (bmdma)
 		/* prepare and activate BMDMA host */
 		rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	else
+#endif
 		/* prepare and activate SFF host */
 		rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
 	if (rc)
 		goto out;
 	host->private_data = host_priv;
 	host->flags |= hflags;
 
+#ifdef CONFIG_ATA_BMDMA
 	if (bmdma) {
 		pci_set_master(pdev);
 		rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
 	} else
+#endif
 		rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
 out:
 	if (rc == 0)

trunk/drivers/crypto/mv_cesa.c

@@ -343,11 +343,13 @@ static void mv_process_hash_current(int first_block)
 		else
 			op.config |= CFG_MID_FRAG;
 
-		writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A);
-		writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B);
-		writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C);
-		writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D);
-		writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E);
+		if (first_block) {
+			writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A);
+			writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B);
+			writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C);
+			writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D);
+			writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E);
+		}
 	}
 
 	memcpy(cpg->sram + SRAM_CONFIG, &op, sizeof(struct sec_accel_config));

trunk/drivers/edac/mpc85xx_edac.c

@@ -1128,7 +1128,7 @@ static struct of_device_id mpc85xx_mc_err_of_match[] = {
 	{ .compatible = "fsl,p1020-memory-controller", },
 	{ .compatible = "fsl,p1021-memory-controller", },
 	{ .compatible = "fsl,p2020-memory-controller", },
-	{ .compatible = "fsl,p4080-memory-controller", },
+	{ .compatible = "fsl,qoriq-memory-controller", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);

trunk/drivers/gpio/gpio-pca953x.c

@@ -546,7 +546,7 @@ static void pca953x_irq_teardown(struct pca953x_chip *chip)
  * Translate OpenFirmware node properties into platform_data
  * WARNING: This is DEPRECATED and will be removed eventually!
  */
-void
+static void
 pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 {
 	struct device_node *node;
@@ -574,7 +574,7 @@ pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 		*invert = *val;
 }
 #else
-void
+static void
 pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 {
 	*gpio_base = -1;

trunk/drivers/gpu/drm/drm_crtc.c

@@ -1873,6 +1873,10 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
 	}
 
 	if (num_clips && clips_ptr) {
+		if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) {
+			ret = -EINVAL;
+			goto out_err1;
+		}
 		clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL);
 		if (!clips) {
 			ret = -ENOMEM;