---

yaml
---
r: 275185
b: refs/heads/master
c: a78f678
h: refs/heads/master
i:
  275183: 8d26c3f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 98393b8ff2ca98b5b984e73a291b81b326e25184
+refs/heads/master: a78f6787a3dd7223bf185895fdcea661b408dc0a

trunk/Documentation/ABI/removed/o2cb

@@ -1,6 +1,6 @@
 What:		/sys/o2cb symlink
 Date:		May 2011
-KernelVersion:	3.0
+KernelVersion:	2.6.40
 Contact:	ocfs2-devel@oss.oracle.com
 Description:	This is a symlink: /sys/o2cb to /sys/fs/o2cb. The symlink is
 		removed when new versions of ocfs2-tools which know to look

trunk/Documentation/ABI/removed/raw1394

@@ -5,7 +5,7 @@ Description:
 	/dev/raw1394 was a character device file that allowed low-level
 	access to FireWire buses.  Its major drawbacks were its inability
 	to implement sensible device security policies, and its low level
-	of abstraction that required userspace clients to duplicate much
+	of abstraction that required userspace clients do duplicate much
 	of the kernel's ieee1394 core functionality.
 	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
 	firewire-core.

trunk/Documentation/ABI/testing/sysfs-block

@@ -206,16 +206,3 @@ Description:
 		when a discarded area is read the discard_zeroes_data
 		parameter will be set to one. Otherwise it will be 0 and
 		the result of reading a discarded area is undefined.
-What:		/sys/block/<disk>/alias
-Date:		Aug 2011
-Contact:	Nao Nishijima <nao.nishijima.xt@hitachi.com>
-Description:
-		A raw device name of a disk does not always point a same disk
-		each boot-up time. Therefore, users have to use persistent
-		device names, which udev creates when the kernel finds a disk,
-		instead of raw device name. However, kernel doesn't show those
-		persistent names on its messages (e.g. dmesg).
-		This file can store an alias of the disk and it would be
-		appeared in kernel messages if it is set. A disk can have an
-		alias which length is up to 255bytes. Users can use alphabets,
-		numbers, "-" and "_" in alias name. This file is writeonce.

trunk/Documentation/ABI/testing/sysfs-bus-bcma

@@ -1,30 +1,30 @@
 What:		/sys/bus/bcma/devices/.../manuf
 Date:		May 2011
-KernelVersion:	3.0
+KernelVersion:	2.6.40
 Contact:	Rafał Miłecki <zajec5@gmail.com>
 Description:
 		Each BCMA core has it's manufacturer id. See
 		include/linux/bcma/bcma.h for possible values.
 
 What:		/sys/bus/bcma/devices/.../id
 Date:		May 2011
-KernelVersion:	3.0
+KernelVersion:	2.6.40
 Contact:	Rafał Miłecki <zajec5@gmail.com>
 Description:
 		There are a few types of BCMA cores, they can be identified by
 		id field.
 
 What:		/sys/bus/bcma/devices/.../rev
 Date:		May 2011
-KernelVersion:	3.0
+KernelVersion:	2.6.40
 Contact:	Rafał Miłecki <zajec5@gmail.com>
 Description:
 		BCMA cores of the same type can still slightly differ depending
 		on their revision. Use it for detailed programming.
 
 What:		/sys/bus/bcma/devices/.../class
 Date:		May 2011
-KernelVersion:	3.0
+KernelVersion:	2.6.40
 Contact:	Rafał Miłecki <zajec5@gmail.com>
 Description:
 		Each BCMA core is identified by few fields, including class it

trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -71,10 +71,3 @@ Description:	Value of 1 indicates the controller can honor the reset_devices
 		a dump device, as kdump requires resetting the device in order
 		to work reliably.
 
-Where:		/sys/bus/pci/devices/<dev>/ccissX/transport_mode
-Date:		July 2011
-Kernel Version:	3.0
-Contact:	iss_storagedev@hp.com
-Description:	Value of "simple" indicates that the controller has been placed
-		in "simple mode". Value of "performant" indicates that the
-		controller has been placed in "performant mode".

trunk/Documentation/ABI/testing/sysfs-bus-usb

@@ -142,18 +142,3 @@ Description:
 		such devices.
 Users:
 		usb_modeswitch
-
-What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
-Date:		September 2011
-Contact:	Andiry Xu <andiry.xu@amd.com>
-Description:
-		If CONFIG_USB_SUSPEND is set and a USB 2.0 lpm-capable device
-		is plugged in to a xHCI host which support link PM, it will
-		perform a LPM test; if the test is passed and host supports
-		USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will
-		be enabled for the device and the USB device directory will
-		contain a file named power/usb2_hardware_lpm.  The file holds
-		a string value (enable or disable) indicating whether or not
-		USB2 hardware LPM is enabled for the device. Developer can
-		write y/Y/1 or n/N/0 to the file to enable/disable the
-		feature.

trunk/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870

@@ -4,8 +4,8 @@ What:		/sys/class/backlight/<backlight>/l2_bright_max
 What:		/sys/class/backlight/<backlight>/l3_office_max
 What:		/sys/class/backlight/<backlight>/l4_indoor_max
 What:		/sys/class/backlight/<backlight>/l5_dark_max
-Date:		May 2011
-KernelVersion:	3.0
+Date:		Mai 2011
+KernelVersion:	2.6.40
 Contact:	device-drivers-devel@blackfin.uclinux.org
 Description:
 		Control the maximum brightness for <ambient light zone>
@@ -18,8 +18,8 @@ What:		/sys/class/backlight/<backlight>/l2_bright_dim
 What:		/sys/class/backlight/<backlight>/l3_office_dim
 What:		/sys/class/backlight/<backlight>/l4_indoor_dim
 What:		/sys/class/backlight/<backlight>/l5_dark_dim
-Date:		May 2011
-KernelVersion:	3.0
+Date:		Mai 2011
+KernelVersion:	2.6.40
 Contact:	device-drivers-devel@blackfin.uclinux.org
 Description:
 		Control the dim brightness for <ambient light zone>
@@ -29,8 +29,8 @@ Description:
 		this <ambient light zone>.
 
 What:		/sys/class/backlight/<backlight>/ambient_light_level
-Date:		May 2011
-KernelVersion:	3.0
+Date:		Mai 2011
+KernelVersion:	2.6.40
 Contact:	device-drivers-devel@blackfin.uclinux.org
 Description:
 		Get conversion value of the light sensor.
@@ -39,8 +39,8 @@ Description:
 		8000 (max ambient brightness)
 
 What:		/sys/class/backlight/<backlight>/ambient_light_zone
-Date:		May 2011
-KernelVersion:	3.0
+Date:		Mai 2011
+KernelVersion:	2.6.40
 Contact:	device-drivers-devel@blackfin.uclinux.org
 Description:
 		Get/Set current ambient light zone. Reading returns

trunk/Documentation/ABI/testing/sysfs-class-net-mesh

@@ -22,14 +22,6 @@ Description:
                 mesh will be fragmented or silently discarded if the
                 packet size exceeds the outgoing interface MTU.
 
-What:		/sys/class/net/<mesh_iface>/mesh/ap_isolation
-Date:		May 2011
-Contact:	Antonio Quartulli <ordex@autistici.org>
-Description:
-		Indicates whether the data traffic going from a
-		wireless client to another wireless client will be
-		silently dropped.
-
 What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
 Date:           October 2010
 Contact:        Marek Lindner <lindner_marek@yahoo.de>