---

yaml
---
r: 222721
b: refs/heads/master
c: 8f1b1a5
h: refs/heads/master
i:
  222719: f858628
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3f0d3d016d89a5efb8b926d4707eb21fa13f3d27
+refs/heads/master: 8f1b1a509658bee2397ddb9937cbfa1b71cdca17

trunk/Documentation/edac.txt

@@ -196,7 +196,7 @@ csrow3.
 The representation of the above is reflected in the directory tree
 in EDAC's sysfs interface. Starting in directory
 /sys/devices/system/edac/mc each memory controller will be represented
-by its own 'mcX' directory, where 'X" is the index of the MC.
+by its own 'mcX' directory, where 'X' is the index of the MC.
 
 
 	..../edac/mc/
@@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC.
 		   ....
 
 Under each 'mcX' directory each 'csrowX' is again represented by a
-'csrowX', where 'X" is the csrow index:
+'csrowX', where 'X' is the csrow index:
 
 
 	.../mc/mc0/
@@ -232,7 +232,7 @@ EDAC control and attribute files.
 
 
 In 'mcX' directories are EDAC control and attribute files for
-this 'X" instance of the memory controllers:
+this 'X' instance of the memory controllers:
 
 
 Counter reset control file:
@@ -343,7 +343,7 @@ Sdram memory scrubbing rate:
 'csrowX' DIRECTORIES
 
 In the 'csrowX' directories are EDAC control and attribute files for
-this 'X" instance of csrow:
+this 'X' instance of csrow:
 
 
 Total Uncorrectable Errors count attribute file:

trunk/Documentation/networking/ip-sysctl.txt

@@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER
 	Count buffering overhead as bytes/2^tcp_adv_win_scale
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
+	Possible values are [-31, 31], inclusive.
 	Default: 2
 
 tcp_allowed_congestion_control - STRING

trunk/arch/arm/mach-omap2/pm24xx.c

@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
+#include <linux/console.h>
 
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
@@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void)
 	if (omap_irq_pending())
 		goto no_sleep;
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (try_acquire_console_sem())
+		goto no_sleep;
+
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
 	omap_uart_prepare_idle(2);
@@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 
+	release_console_sem();
+
 no_sleep:
 	if (omap2_pm_debug) {
 		unsigned long long tmp;

trunk/arch/arm/mach-omap2/pm34xx.c

@@ -28,6 +28,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/console.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -385,6 +386,12 @@ void omap_sram_idle(void)
 		omap3_enable_io_chain();
 	}
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (per_next_state < PWRDM_POWER_ON ||
+	    core_next_state < PWRDM_POWER_ON)
+		if (try_acquire_console_sem())
+			goto console_still_active;
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
@@ -463,6 +470,9 @@ void omap_sram_idle(void)
 		omap_uart_resume_idle(3);
 	}
 
+	release_console_sem();
+
+console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (omap3_has_io_wakeup() &&
 	    (per_next_state < PWRDM_POWER_ON ||

trunk/arch/arm/mach-omap2/serial.c

@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/serial_8250.h>
 #include <linux/pm_runtime.h>
+#include <linux/console.h>
 
 #ifdef CONFIG_SERIAL_OMAP
 #include <plat/omap-serial.h>
@@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num)
 	struct omap_uart_state *uart;
 
 	list_for_each_entry(uart, &uart_list, node) {
-		if (num == uart->num) {
+		if (num == uart->num && uart->can_sleep) {
 			omap_uart_enable_clocks(uart);
 
 			/* Check for IO pad wakeup */
@@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port)
 
 	oh->dev_attr = uart;
 
+	acquire_console_sem(); /* in case the earlycon is on the UART */
+
 	/*
 	 * Because of early UART probing, UART did not get idled
 	 * on init.  Now that omap_device is ready, ensure full idle
@@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port)
 	omap_uart_block_sleep(uart);
 	uart->timeout = DEFAULT_TIMEOUT;
 
+	release_console_sem();
+
 	if ((cpu_is_omap34xx() && uart->padconf) ||
 	    (uart->wk_en && uart->wk_mask)) {
 		device_init_wakeup(&od->pdev.dev, true);

trunk/drivers/edac/Makefile

@@ -10,16 +10,16 @@ obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
 obj-$(CONFIG_EDAC_MCE)			+= edac_mce.o
 
-edac_core-objs	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
-edac_core-objs	+= edac_module.o edac_device_sysfs.o
+edac_core-y	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
+edac_core-y	+= edac_module.o edac_device_sysfs.o
 
 ifdef CONFIG_PCI
-edac_core-objs	+= edac_pci.o edac_pci_sysfs.o
+edac_core-y	+= edac_pci.o edac_pci_sysfs.o
 endif
 
 obj-$(CONFIG_EDAC_MCE_INJ)		+= mce_amd_inj.o
 
-edac_mce_amd-objs			:= mce_amd.o
+edac_mce_amd-y				:= mce_amd.o
 obj-$(CONFIG_EDAC_DECODE_MCE)		+= edac_mce_amd.o
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o

trunk/drivers/edac/mce_amd_inj.c

@@ -139,7 +139,7 @@ static int __init edac_init_mce_inject(void)
 	return 0;
 
 err_sysfs_create:
-	while (i-- >= 0)
+	while (--i >= 0)
 		sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
 
 	kobject_del(mce_kobj);

trunk/drivers/isdn/icn/icn.c

@@ -1627,7 +1627,7 @@ __setup("icn=", icn_setup);
 static int __init icn_init(void)
 {
 	char *p;
-	char rev[10];
+	char rev[20];
 
 	memset(&dev, 0, sizeof(icn_dev));
 	dev.memaddr = (membase & 0x0ffc000);
@@ -1637,9 +1637,10 @@ static int __init icn_init(void)
 	spin_lock_init(&dev.devlock);
 
 	if ((p = strchr(revision, ':'))) {
-		strcpy(rev, p + 1);
+		strncpy(rev, p + 1, 20);
 		p = strchr(rev, '$');
-		*p = 0;
+		if (p)
+			*p = 0;
 	} else
 		strcpy(rev, " ??? ");
 	printk(KERN_NOTICE "ICN-ISDN-driver Rev%smem=0x%08lx\n", rev,

trunk/drivers/net/Kconfig

@@ -2543,10 +2543,10 @@ config PCH_GBE
 	depends on PCI
 	select MII
 	---help---
-	  This is a gigabit ethernet driver for Topcliff PCH.
-	  Topcliff PCH is the platform controller hub that is used in Intel's
+	  This is a gigabit ethernet driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
 	  general embedded platform.
-	  Topcliff PCH has Gigabit Ethernet interface.
+	  EG20T PCH has Gigabit Ethernet interface.
 	  Using this interface, it is able to access system devices connected
 	  to Gigabit Ethernet.
 	  This driver enables Gigabit Ethernet function.

trunk/drivers/net/au1000_eth.c

@@ -155,10 +155,10 @@ static void au1000_enable_mac(struct net_device *dev, int force_reset)
 	spin_lock_irqsave(&aup->lock, flags);
 
 	if (force_reset || (!aup->mac_enabled)) {
-		writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+		writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 		au_sync_delay(2);
 		writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2
-				| MAC_EN_CLOCK_ENABLE), &aup->enable);
+				| MAC_EN_CLOCK_ENABLE), aup->enable);
 		au_sync_delay(2);
 
 		aup->mac_enabled = 1;
@@ -503,9 +503,9 @@ static void au1000_reset_mac_unlocked(struct net_device *dev)
 
 	au1000_hard_stop(dev);
 
-	writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+	writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 	au_sync_delay(2);
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	au_sync_delay(2);
 
 	aup->tx_full = 0;
@@ -1119,7 +1119,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 	/* set a random MAC now in case platform_data doesn't provide one */
 	random_ether_addr(dev->dev_addr);
 
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	aup->mac_enabled = 0;
 
 	pd = pdev->dev.platform_data;

trunk/drivers/net/cxgb4vf/cxgb4vf_main.c

@@ -816,40 +816,48 @@ static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev)
 }
 
 /*
- * Collect up to maxaddrs worth of a netdevice's unicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
  */
-static inline int collect_netdev_uc_list_addrs(const struct net_device *dev,
-					       const u8 **addr,
-					       unsigned int maxaddrs)
+static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev,
+							const u8 **addr,
+							unsigned int offset,
+							unsigned int maxaddrs)
 {
+	unsigned int index = 0;
 	unsigned int naddr = 0;
 	const struct netdev_hw_addr *ha;
 
-	for_each_dev_addr(dev, ha) {
-		addr[naddr++] = ha->addr;
-		if (naddr >= maxaddrs)
-			break;
-	}
+	for_each_dev_addr(dev, ha)
+		if (index++ >= offset) {
+			addr[naddr++] = ha->addr;
+			if (naddr >= maxaddrs)
+				break;
+		}
 	return naddr;
 }
 
 /*
- * Collect up to maxaddrs worth of a netdevice's multicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
  */
-static inline int collect_netdev_mc_list_addrs(const struct net_device *dev,
-					       const u8 **addr,
-					       unsigned int maxaddrs)
+static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev,
+							const u8 **addr,
+							unsigned int offset,
+							unsigned int maxaddrs)
 {
+	unsigned int index = 0;
 	unsigned int naddr = 0;
 	const struct netdev_hw_addr *ha;
 
-	netdev_for_each_mc_addr(ha, dev) {
-		addr[naddr++] = ha->addr;
-		if (naddr >= maxaddrs)
-			break;
-	}
+	netdev_for_each_mc_addr(ha, dev)
+		if (index++ >= offset) {
+			addr[naddr++] = ha->addr;
+			if (naddr >= maxaddrs)
+				break;
+		}
 	return naddr;
 }
 
@@ -862,29 +870,38 @@ static int set_addr_filters(const struct net_device *dev, bool sleep)
 	u64 mhash = 0;
 	u64 uhash = 0;
 	bool free = true;
-	u16 filt_idx[7];
+	unsigned int offset, naddr;
 	const u8 *addr[7];
-	int ret, naddr = 0;
+	int ret;
 	const struct port_info *pi = netdev_priv(dev);
 
 	/* first do the secondary unicast addresses */
-	naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr));
-	if (naddr > 0) {
+	for (offset = 0; ; offset += naddr) {
+		naddr = collect_netdev_uc_list_addrs(dev, addr, offset,
+						     ARRAY_SIZE(addr));
+		if (naddr == 0)
+			break;
+
 		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, filt_idx, &uhash, sleep);
+					  naddr, addr, NULL, &uhash, sleep);
 		if (ret < 0)
 			return ret;
 
 		free = false;
 	}
 
 	/* next set up the multicast addresses */
-	naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr));
-	if (naddr > 0) {
+	for (offset = 0; ; offset += naddr) {
+		naddr = collect_netdev_mc_list_addrs(dev, addr, offset,
+						     ARRAY_SIZE(addr));
+		if (naddr == 0)
+			break;
+
 		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, filt_idx, &mhash, sleep);
+					  naddr, addr, NULL, &mhash, sleep);
 		if (ret < 0)
 			return ret;
+		free = false;
 	}
 
 	return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0,