---

yaml
---
r: 75411
b: refs/heads/master
c: 66a2173
h: refs/heads/master
i:
  75409: 3e36be1
  75407: 3dbeb97
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8df042e85c4462f97be286ef0fd82a627f27e9c8
+refs/heads/master: 66a21736defda339cd93a0e70c1120ab813640f6

trunk/Documentation/kernel-parameters.txt

@@ -527,30 +527,29 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <area>[,<node>]
 			See also Documentation/networking/decnet.txt.
 
-	vt.default_blu=	[VT]
+	default_blu=	[VT]
 			Format: <blue0>,<blue1>,<blue2>,...,<blue15>
 			Change the default blue palette of the console.
 			This is a 16-member array composed of values
 			ranging from 0-255.
 
-	vt.default_grn=	[VT]
+	default_grn=	[VT]
 			Format: <green0>,<green1>,<green2>,...,<green15>
 			Change the default green palette of the console.
 			This is a 16-member array composed of values
 			ranging from 0-255.
 
-	vt.default_red=	[VT]
+	default_red=	[VT]
 			Format: <red0>,<red1>,<red2>,...,<red15>
 			Change the default red palette of the console.
 			This is a 16-member array composed of values
 			ranging from 0-255.
 
-	vt.default_utf8=
-			[VT]
+	default_utf8=   [VT]
 			Format=<0|1>
 			Set system-wide default UTF-8 mode for all tty's.
-			Default is 1, i.e. UTF-8 mode is enabled for all
-			newly opened terminals.
+			Default is 0 and by setting to 1, it enables UTF-8
+			mode for all newly opened or allocated terminals.
 
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
@@ -883,14 +882,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	lapic_timer_c2_ok	[X86-32,x86-64,APIC] trust the local apic timer in
 			C2 power state.
 
-	libata.dma=	[LIBATA] DMA control
-			libata.dma=0	  Disable all PATA and SATA DMA
-			libata.dma=1	  PATA and SATA Disk DMA only
-			libata.dma=2	  ATAPI (CDROM) DMA only
-			libata.dma=4	  Compact Flash DMA only 
-			Combinations also work, so libata.dma=3 enables DMA
-			for disks and CDROMs, but not CFs.
-
 	libata.noacpi	[LIBATA] Disables use of ACPI in libata suspend/resume
 			when set.
 			Format: <int>

trunk/Documentation/nfsroot.txt

@@ -145,7 +145,6 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
 		this option.
 
                   off or none: don't use autoconfiguration
-				(do static IP assignment instead)
 		  on or any:   use any protocol available in the kernel
 			       (default)
 		  dhcp:        use DHCP

trunk/MAINTAINERS

@@ -1919,7 +1919,7 @@ INFINIBAND SUBSYSTEM
 P:	Roland Dreier
 M:	rolandd@cisco.com
 P:	Sean Hefty
-M:	sean.hefty@intel.com
+M:	mshefty@ichips.intel.com
 P:	Hal Rosenstock
 M:	hal.rosenstock@gmail.com 
 L:	general@lists.openfabrics.org
@@ -1984,27 +1984,29 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 
 INTEL PRO/100 ETHERNET SUPPORT
-P:	Auke Kok
-M:	auke-jan.h.kok@intel.com
+P:	John Ronciak
+M:	john.ronciak@intel.com
 P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
 P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
-P:	John Ronciak
-M:	john.ronciak@intel.com
+P:	Auke Kok
+M:	auke-jan.h.kok@intel.com
 L:	e1000-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
 INTEL PRO/1000 GIGABIT ETHERNET SUPPORT
-P:	Auke Kok
-M:	auke-jan.h.kok@intel.com
+P:	Jeb Cramer
+M:	cramerj@intel.com
+P:	John Ronciak
+M:	john.ronciak@intel.com
 P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
 P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
-P:	John Ronciak
-M:	john.ronciak@intel.com
+P:	Auke Kok
+M:	auke-jan.h.kok@intel.com
 L:	e1000-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 24
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc6
 NAME = Arr Matey! A Hairy Bilge Rat!
 
 # *DOCUMENTATION*

trunk/arch/arm/mach-at91/board-ek.c

@@ -109,15 +109,6 @@ static struct spi_board_info ek_spi_devices[] = {
 #endif
 };
 
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ics1523", 0x26),
-	},
-	{
-		I2C_BOARD_INFO("dac3550", 0x4d),
-	}
-};
-
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
 #define EK_FLASH_SIZE	0x200000
 

trunk/arch/arm/mach-pxa/pxa25x.c

@@ -178,19 +178,13 @@ static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
 	SAVE(GAFR1_L); SAVE(GAFR1_U);
 	SAVE(GAFR2_L); SAVE(GAFR2_U);
 
-	SAVE(ICMR); ICMR = 0;
+	SAVE(ICMR);
 	SAVE(CKEN);
 	SAVE(PSTR);
-
-	/* Clear GPIO transition detect bits */
-	GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
 }
 
 static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-
 	/* restore registers */
 	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
 	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
@@ -201,12 +195,7 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
 	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
 
-	PSSR = PSSR_RDH | PSSR_PH;
-
 	RESTORE(CKEN);
-
-	ICLR = 0;
-	ICCR = 1;
 	RESTORE(ICMR);
 	RESTORE(PSTR);
 }

trunk/arch/ia64/sn/kernel/xp_nofault.S

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2004-2007 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2004-2005 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 
@@ -14,11 +14,6 @@
  * PIO read fails, the MCA handler will force the error to look
  * corrected and vector to the xp_error_PIOR which will return an error.
  *
- * The definition of "consumption" and the time it takes for an MCA
- * to surface is processor implementation specific.  This code
- * is sufficient on Itanium through the Montvale processor family.
- * It may need to be adjusted for future processor implementations.
- *
  *	extern int xp_nofault_PIOR(void *remote_register);
  */
 
@@ -27,10 +22,11 @@ xp_nofault_PIOR:
 	mov	r8=r0			// Stage a success return value
 	ld8.acq	r9=[r32];;		// PIO Read the specified register
 	adds	r9=1,r9;;		// Add to force consumption
-	srlz.i;;			// Allow time for MCA to surface
+	or	r9=r9,r9;;		// Or to force consumption
 	br.ret.sptk.many b0;;		// Return success
 
 	.global xp_error_PIOR
 xp_error_PIOR:
 	mov	r8=1			// Return value of 1
 	br.ret.sptk.many b0;;		// Return failure
+

trunk/arch/mips/Kconfig

@@ -992,6 +992,8 @@ config BOOT_ELF64
 
 menu "CPU selection"
 
+source "kernel/time/Kconfig"
+
 choice
 	prompt "CPU type"
 	default CPU_R4X00
@@ -1766,8 +1768,6 @@ config NR_CPUS
 	  performance should round up your number of processors to the next
 	  power of two.
 
-source "kernel/time/Kconfig"
-
 #
 # Timer Interrupt Frequency Configuration
 #

trunk/arch/mips/au1000/common/pci.c

@@ -1,8 +1,8 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *	Alchemy/AMD Au1x00 PCI support.
+ *	Alchemy/AMD Au1x00 pci support.
  *
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
+ * Copyright 2001,2002,2003 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
  *         	ppopov@mvista.com or source@mvista.com
  *
@@ -66,8 +66,6 @@ static unsigned long virt_io_addr;
 
 static int __init au1x_pci_setup(void)
 {
-	extern void au1x_pci_cfg_init(void);
-
 #if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
 	virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
 			Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
@@ -96,8 +94,6 @@ static int __init au1x_pci_setup(void)
 	set_io_port_base(virt_io_addr);
 #endif
 
-	au1x_pci_cfg_init();
-
 	register_pci_controller(&au1x_controller);
 	return 0;
 }

trunk/arch/mips/kernel/head.S

@@ -136,8 +136,7 @@ EXPORT(_stext)
 	 * kernel load address.  This is needed because this platform does
 	 * not have a ELF loader yet.
 	 */
-FEXPORT(__kernel_entry)
-	j	kernel_entry
+	__INIT
 #endif
 
 	__INIT_REFOK

trunk/arch/mips/kernel/time.c

@@ -147,9 +147,9 @@ static __init int cpu_has_mfc0_count_bug(void)
 			return 1;
 
 		/*
-		 * we assume newer revisions are ok
+		 * I don't have erratas for newer R4400 so be paranoid.
 		 */
-		return 0;
+		return 1;
 	}
 
 	return 0;

trunk/arch/mips/pci/ops-au1000.c

@@ -1,8 +1,8 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *	Alchemy/AMD Au1x00 PCI support.
+ *	Alchemy/AMD Au1x00 pci support.
  *
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
+ * Copyright 2001,2002,2003 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
  *         	ppopov@mvista.com or source@mvista.com
  *
@@ -69,27 +69,10 @@ void mod_wired_entry(int entry, unsigned long entrylo0,
 	write_c0_pagemask(old_pagemask);
 }
 
-static struct vm_struct *pci_cfg_vm;
+struct vm_struct *pci_cfg_vm;
 static int pci_cfg_wired_entry;
-static unsigned long last_entryLo0, last_entryLo1;
-
-/*
- * We can't ioremap the entire pci config space because it's too large.
- * Nor can we call ioremap dynamically because some device drivers use
- * the PCI config routines from within interrupt handlers and that
- * becomes a problem in get_vm_area().  We use one wired TLB to handle
- * all config accesses for all busses.
- */
-void __init au1x_pci_cfg_init(void)
-{
-	/* Reserve a wired entry for PCI config accesses */
-	pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
-	if (!pci_cfg_vm)
-		panic(KERN_ERR "PCI unable to get vm area\n");
-	pci_cfg_wired_entry = read_c0_wired();
-	add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
-	last_entryLo0 = last_entryLo1 = 0xffffffff;
-}
+static int first_cfg = 1;
+unsigned long last_entryLo0, last_entryLo1;
 
 static int config_access(unsigned char access_type, struct pci_bus *bus,
 			 unsigned int dev_fn, unsigned char where,
@@ -114,6 +97,27 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
 			Au1500_PCI_STATCMD);
 	au_sync_udelay(1);
 
+	/*
+	 * We can't ioremap the entire pci config space because it's
+	 * too large. Nor can we call ioremap dynamically because some
+	 * device drivers use the pci config routines from within
+	 * interrupt handlers and that becomes a problem in get_vm_area().
+	 * We use one wired tlb to handle all config accesses for all
+	 * busses. To improve performance, if the current device
+	 * is the same as the last device accessed, we don't touch the
+	 * tlb.
+	 */
+	if (first_cfg) {
+		/* reserve a wired entry for pci config accesses */
+		first_cfg = 0;
+		pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
+		if (!pci_cfg_vm)
+			panic(KERN_ERR "PCI unable to get vm area\n");
+		pci_cfg_wired_entry = read_c0_wired();
+		add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
+		last_entryLo0  = last_entryLo1 = 0xffffffff;
+	}
+
 	/* Allow board vendors to implement their own off-chip idsel.
 	 * If it doesn't succeed, may as well bail out at this point.
 	 */
@@ -140,12 +144,9 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
 	/* page boundary */
 	cfg_base = cfg_base & PAGE_MASK;
 
-	/*
-	 * To improve performance, if the current device is the same as
-	 * the last device accessed, we don't touch the TLB.
-	 */
 	entryLo0 = (6 << 26)  | (cfg_base >> 6) | (2 << 3) | 7;
 	entryLo1 = (6 << 26)  | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
+
 	if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
 		mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
 				(unsigned long)pci_cfg_vm->addr, PM_4K);

trunk/arch/mips/pci/ops-mace.c

@@ -42,10 +42,6 @@ static int
 mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 		     int reg, int size, u32 *val)
 {
-	u32 control = mace->pci.control;
-
-	/* disable master aborts interrupts during config read */
-	mace->pci.control = control & ~MACEPCI_CONTROL_MAR_INT;
 	mace->pci.config_addr = mkaddr(bus, devfn, reg);
 	switch (size) {
 	case 1:
@@ -58,9 +54,6 @@ mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 		*val = mace->pci.config_data.l;
 		break;
 	}
-	/* ack possible master abort */
-	mace->pci.error &= ~MACEPCI_ERROR_MASTER_ABORT;
-	mace->pci.control = control;
 
 	DPRINTK("read%d: reg=%08x,val=%02x\n", size * 8, reg, *val);
 

trunk/arch/mips/pci/pci-ip32.c

@@ -119,7 +119,6 @@ static struct pci_controller mace_pci_controller = {
 	.iommu		= 0,
 	.mem_offset	= MACE_PCI_MEM_OFFSET,
 	.io_offset	= 0,
-	.io_map_base	= CKSEG1ADDR(MACEPCI_LOW_IO),
 };
 
 static int __init mace_init(void)
@@ -136,8 +135,7 @@ static int __init mace_init(void)
 	BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0,
 			   "MACE PCI error", NULL));
 
-	/* extend memory resources */
-	iomem_resource.end = mace_pci_mem_resource.end;
+	iomem_resource = mace_pci_mem_resource;
 	ioport_resource = mace_pci_io_resource;
 
 	register_pci_controller(&mace_pci_controller);