---

yaml
---
r: 4375
b: refs/heads/master
c: 5bc6b68
h: refs/heads/master
i:
  4373: c6aa988
  4371: 5698b0c
  4367: 9c1b490
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 4230dfc9c3f708f4765736b862aa313aa97e3c2e
+refs/heads/master: 5bc6b68a103a6f4055890b5127ddca3a322751b0

trunk/drivers/pcmcia/cs.c

@@ -215,6 +215,13 @@ int pcmcia_register_socket(struct pcmcia_socket *socket)
 	list_add_tail(&socket->socket_list, &pcmcia_socket_list);
 	up_write(&pcmcia_socket_list_rwsem);
 
+#ifndef CONFIG_CARDBUS
+	/*
+	 * If we do not support Cardbus, ensure that
+	 * the Cardbus socket capability is disabled.
+	 */
+	socket->features &= ~SS_CAP_CARDBUS;
+#endif
 
 	/* set proper values in socket->dev */
 	socket->dev.class_data = socket;
@@ -448,11 +455,11 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
 	}
 
 	if (status & SS_CARDBUS) {
+		if (!(skt->features & SS_CAP_CARDBUS)) {
+			cs_err(skt, "cardbus cards are not supported.\n");
+			return CS_BAD_TYPE;
+		}
 		skt->state |= SOCKET_CARDBUS;
-#ifndef CONFIG_CARDBUS
-		cs_err(skt, "cardbus cards are not supported.\n");
-		return CS_BAD_TYPE;
-#endif
 	}
 
 	/*

trunk/drivers/pcmcia/yenta_socket.c

@@ -868,14 +868,11 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
  */
 static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_irq_mask)
 {
-	socket->socket.features |= SS_CAP_PAGE_REGS | SS_CAP_PCCARD | SS_CAP_CARDBUS;
-	socket->socket.map_size = 0x1000;
 	socket->socket.pci_irq = socket->cb_irq;
 	if (isa_probe)
 		socket->socket.irq_mask = yenta_probe_irq(socket, isa_irq_mask);
 	else
 		socket->socket.irq_mask = 0;
-	socket->socket.cb_dev = socket->dev;
 
 	printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n",
 	       socket->socket.irq_mask, socket->cb_irq);
@@ -941,6 +938,9 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
 	socket->socket.dev.dev = &dev->dev;
 	socket->socket.driver_data = socket;
 	socket->socket.owner = THIS_MODULE;
+	socket->socket.features = SS_CAP_PAGE_REGS | SS_CAP_PCCARD;
+	socket->socket.map_size = 0x1000;
+	socket->socket.cb_dev = dev;
 
 	/* prepare struct yenta_socket */
 	socket->dev = dev;
@@ -1011,6 +1011,10 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
 		socket->poll_timer.data = (unsigned long)socket;
 		socket->poll_timer.expires = jiffies + HZ;
 		add_timer(&socket->poll_timer);
+		printk(KERN_INFO "Yenta: no PCI IRQ, CardBus support disabled for this socket.\n"
+		       KERN_INFO "Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
+	} else {
+		socket->socket.features |= SS_CAP_CARDBUS;
 	}
 
 	/* Figure out what the dang thing can do for the PCMCIA layer... */