---

yaml
---
r: 146885
b: refs/heads/master
c: 6bc1096
h: refs/heads/master
i:
  146883: 37ddb7c
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d3d07d941fd80c173b6d690ded00ee5fb8302e06
+refs/heads/master: 6bc1096d7ab3621b3ffcf06616d1f4e0325d903d

trunk/Documentation/DMA-API.txt

@@ -704,24 +704,12 @@ this directory the following files can currently be found:
 				The current number of free dma_debug_entries
 				in the allocator.
 
-	dma-api/driver-filter
-				You can write a name of a driver into this file
-				to limit the debug output to requests from that
-				particular driver. Write an empty string to
-				that file to disable the filter and see
-				all errors again.
-
 If you have this code compiled into your kernel it will be enabled by default.
 If you want to boot without the bookkeeping anyway you can provide
 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
 Notice that you can not enable it again at runtime. You have to reboot to do
 so.
 
-If you want to see debug messages only for a special device driver you can
-specify the dma_debug_driver=<drivername> parameter. This will enable the
-driver filter at boot time. The debug code will only print errors for that
-driver afterwards. This filter can be disabled or changed later using debugfs.
-
 When the code disables itself at runtime this is most likely because it ran
 out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you

trunk/Documentation/DocBook/Makefile

@@ -13,8 +13,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
-	    alsa-driver-api.xml writing-an-alsa-driver.xml \
-	    tracepoint.xml
+	    alsa-driver-api.xml writing-an-alsa-driver.xml
 
 ###
 # The build process is as follows (targets):

trunk/Documentation/RCU/trace.txt

@@ -192,24 +192,23 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
 The output of "cat rcu/rcudata" looks as follows:
 
 rcu:
-rcu:
-  0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
-  1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
-  2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
-  3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
-  4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
-  5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
-  6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
-  7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
+  0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10
+  1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10
+  2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10
+  3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10
+  4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10
+  5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10
+  6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10
+  7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10
 rcu_bh:
-  0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
-  1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
-  2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
-  4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10
+  1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10
+  2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10
+  3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10
+  4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
+  5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
+  6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
+  7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
 
 The first section lists the rcu_data structures for rcu, the second for
 rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
@@ -254,6 +253,12 @@ o	"pqc" indicates which grace period the last-observed quiescent
 o	"qp" indicates that RCU still expects a quiescent state from
 	this CPU.
 
+o	"rpfq" is the number of rcu_pending() calls on this CPU required
+	to induce this CPU to invoke force_quiescent_state().
+
+o	"rp" is low-order four hex digits of the count of how many times
+	rcu_pending() has been invoked on this CPU.
+
 o	"dt" is the current value of the dyntick counter that is incremented
 	when entering or leaving dynticks idle state, either by the
 	scheduler or by irq.  The number after the "/" is the interrupt
@@ -300,9 +305,6 @@ o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.
 
-There is also an rcu/rcudata.csv file with the same information in
-comma-separated-variable spreadsheet format.
-
 
 The output of "cat rcu/rcugp" looks as follows:
 
@@ -409,63 +411,3 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		For example, the first entry at the lowest level shows
 		"^0", indicating that it corresponds to bit zero in
 		the first entry at the middle level.
-
-
-The output of "cat rcu/rcu_pending" looks as follows:
-
-rcu:
-  0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
-  1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
-  2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
-  3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
-  4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
-  5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
-  6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
-  7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
-rcu_bh:
-  0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
-  1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
-  2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
-  3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
-  4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
-  5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
-  6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
-  7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
-
-As always, this is once again split into "rcu" and "rcu_bh" portions.
-The fields are as follows:
-
-o	"np" is the number of times that __rcu_pending() has been invoked
-	for the corresponding flavor of RCU.
-
-o	"qsp" is the number of times that the RCU was waiting for a
-	quiescent state from this CPU.
-
-o	"cbr" is the number of times that this CPU had RCU callbacks
-	that had passed through a grace period, and were thus ready
-	to be invoked.
-
-o	"cng" is the number of times that this CPU needed another
-	grace period while RCU was idle.
-
-o	"gpc" is the number of times that an old grace period had
-	completed, but this CPU was not yet aware of it.
-
-o	"gps" is the number of times that a new grace period had started,
-	but this CPU was not yet aware of it.
-
-o	"nf" is the number of times that this CPU suspected that the
-	current grace period had run for too long, and thus needed to
-	be forced.
-
-	Please note that "forcing" consists of sending resched IPIs
-	to holdout CPUs.  If that CPU really still is in an old RCU
-	read-side critical section, then we really do have to wait for it.
-	The assumption behing "forcing" is that the CPU is not still in
-	an old RCU read-side critical section, but has not yet responded
-	for some other reason.
-
-o	"nn" is the number of times that this CPU needed nothing.  Alert
-	readers will note that the rcu "nn" number for a given CPU very
-	closely matches the rcu_bh "np" number for that same CPU.  This
-	is due to short-circuit evaluation in rcu_pending().

trunk/Documentation/Smack.txt

@@ -184,9 +184,8 @@ length. Single character labels using special characters, that being anything
 other than a letter or digit, are reserved for use by the Smack development
 team. Smack labels are unstructured, case sensitive, and the only operation
 ever performed on them is comparison for equality. Smack labels cannot
-contain unprintable characters, the "/" (slash), the "\" (backslash), the "'"
-(quote) and '"' (double-quote) characters.
-Smack labels cannot begin with a '-', which is reserved for special options.
+contain unprintable characters or the "/" (slash) character. Smack labels
+cannot begin with a '-', which is reserved for special options.
 
 There are some predefined labels:
 
@@ -524,18 +523,3 @@ Smack supports some mount options:
 
 These mount options apply to all file system types.
 
-Smack auditing
-
-If you want Smack auditing of security events, you need to set CONFIG_AUDIT
-in your kernel configuration.
-By default, all denied events will be audited. You can change this behavior by
-writing a single character to the /smack/logging file :
-0 : no logging
-1 : log denied (default)
-2 : log accepted
-3 : log denied & accepted
-
-Events are logged as 'key=value' pairs, for each event you at least will get
-the subjet, the object, the rights requested, the action, the kernel function
-that triggered the event, plus other pairs depending on the type of event
-audited.