Merge branch 'timers/for-arm' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/tip/tip into for-rmk/broadcast

Documentation/device-mapper/dm-raid.txt

@@ -141,3 +141,4 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
+1.3.2   Fix/improve redundancy checking for RAID10

Documentation/x86/boot.txt

@@ -57,6 +57,10 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
+Protocol 2.12:	(Kernel 3.9) Added the xloadflags field and extension fields
+	 	to struct boot_params for for loading bzImage and ramdisk
+		above 4G in 64bit.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -182,7 +186,7 @@ Offset	Proto	Name		Meaning
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	N/A	pad3		Unused
+0236/2	2.12+	xloadflags	Boot protocol option flags
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -582,6 +586,27 @@ Protocol:	2.10+
   misaligned kernel.  Therefore, a loader should typically try each
   power-of-two alignment from kernel_alignment down to this alignment.
 
+Field name:     xloadflags
+Type:           read
+Offset/size:    0x236/2
+Protocol:       2.12+
+
+  This field is a bitmask.
+
+  Bit 0 (read):	XLF_KERNEL_64
+	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
+
+  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
+        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
+
+  Bit 2 (read):	XLF_EFI_HANDOVER_32
+	- If 1, the kernel supports the 32-bit EFI handoff entry point
+          given at handover_offset.
+
+  Bit 3 (read): XLF_EFI_HANDOVER_64
+	- If 1, the kernel supports the 64-bit EFI handoff entry point
+          given at handover_offset + 0x200.
+
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4

Documentation/x86/zero-page.txt

@@ -19,6 +19,9 @@ Offset	Proto	Name		Meaning
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
 0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
+0C0/004	ALL	ext_ramdisk_image ramdisk_image high 32bits
+0C4/004	ALL	ext_ramdisk_size  ramdisk_size high 32bits
+0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
@@ -27,6 +30,7 @@ Offset	Proto	Name		Meaning
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
 				(below)
+1EF/001	ALL	sentinel	Used to detect broken bootloaders
 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00	ALL	e820_map	E820 memory map table
 				(array of struct e820entry)

MAINTAINERS

@@ -2966,7 +2966,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -4905,7 +4905,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -5180,7 +5180,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -7088,7 +7088,7 @@ F:	include/uapi/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:	Liam Girdwood <lrg@ti.com>
+M:	Liam Girdwood <lgirdwood@gmail.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

arch/powerpc/kernel/entry_32.S

@@ -439,6 +439,8 @@ ret_from_fork:
 ret_from_kernel_thread:
 	REST_NVGPRS(r1)
 	bl	schedule_tail
+	li	r3,0
+	stw	r3,0(r1)
 	mtlr	r14
 	mr	r3,r15
 	PPC440EP_ERR42

arch/powerpc/kernel/entry_64.S

@@ -664,6 +664,19 @@ resume_kernel:
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
+
+	/*
+	 * arch_local_irq_restore() from preempt_schedule_irq above may
+	 * enable hard interrupt but we really should disable interrupts
+	 * when we return from the interrupt, and so that we don't get
+	 * interrupted after loading SRR0/1.
+	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
+	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
+	mtmsrd	r10,1		  /* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
 #endif /* CONFIG_PREEMPT */
 
 	.globl	fast_exc_return_irq

arch/powerpc/kernel/kgdb.c

@@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 static int kgdb_singlestep(struct pt_regs *regs)
 {
 	struct thread_info *thread_info, *exception_thread_info;
-	struct thread_info *backup_current_thread_info = \
-		(struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
+	struct thread_info *backup_current_thread_info;
 
 	if (user_mode(regs))
 		return 0;
 
+	backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
 	/*
 	 * On Book E and perhaps other processors, singlestep is handled on
 	 * the critical exception stack.  This causes current_thread_info()
@@ -185,6 +185,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
 		/* Restore current_thread_info lastly. */
 		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
 
+	kfree(backup_current_thread_info);
 	return 1;
 }
 

arch/powerpc/kernel/time.c

@@ -494,10 +494,15 @@ void timer_interrupt(struct pt_regs * regs)
 	set_dec(DECREMENTER_MAX);
 
 	/* Some implementations of hotplug will get timer interrupts while
-	 * offline, just ignore these
+	 * offline, just ignore these and we also need to set
+	 * decrementers_next_tb as MAX to make sure __check_irq_replay
+	 * don't replay timer interrupt when return, otherwise we'll trap
+	 * here infinitely :(
 	 */
-	if (!cpu_online(smp_processor_id()))
+	if (!cpu_online(smp_processor_id())) {
+		*next_tb = ~(u64)0;
 		return;
+	}
 
 	/* Conditionally hard-enable interrupts now that the DEC has been
 	 * bumped to its maximum value

arch/powerpc/oprofile/op_model_power4.c

@@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1)
 	for (pmc = 0; pmc < 4; pmc++) {
 		psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
 				<< (OPROFILE_MAX_PMC_NUM - pmc)
-				* OPROFILE_MAX_PMC_NUM);
+				* OPROFILE_PMSEL_FIELD_WIDTH);
 		psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
 				 * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
 		unit = mmcr1 & (OPROFILE_PM_UNIT_MSK

arch/powerpc/platforms/pasemi/cpufreq.c

@@ -236,6 +236,13 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
+	/*
+	 * We don't support CPU hotplug. Don't unmap after the system
+	 * has already made it to a running state.
+	 */
+	if (system_state != SYSTEM_BOOTING)
+		return 0;
+
 	if (sdcasr_mapbase)
 		iounmap(sdcasr_mapbase);
 	if (sdcpwr_mapbase)

arch/s390/include/asm/pgtable.h

@@ -1365,6 +1365,18 @@ static inline void pmdp_invalidate(struct vm_area_struct *vma,
 	__pmd_idte(address, pmdp);
 }
 
+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+				      unsigned long address, pmd_t *pmdp)
+{
+	pmd_t pmd = *pmdp;
+
+	if (pmd_write(pmd)) {
+		__pmd_idte(address, pmdp);
+		set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd));
+	}
+}
+
 static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot)
 {
 	pmd_t __pmd;

arch/x86/Kconfig

@@ -2138,6 +2138,7 @@ config OLPC_XO1_RTC
 config OLPC_XO1_SCI
 	bool "OLPC XO-1 SCI extras"
 	depends on OLPC && OLPC_XO1_PM
+	depends on INPUT=y
 	select POWER_SUPPLY
 	select GPIO_CS5535
 	select MFD_CORE

arch/x86/boot/Makefile

@@ -71,7 +71,7 @@ GCOV_PROFILE := n
 $(obj)/bzImage: asflags-y  := $(SVGA_MODE)
 
 quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@
+cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@
 
 $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
 	$(call if_changed,image)
@@ -92,7 +92,7 @@ targets += voffset.h
 $(obj)/voffset.h: vmlinux FORCE
 	$(call if_changed,voffset)
 
-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
 
 quiet_cmd_zoffset = ZOFFSET $@
       cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@

arch/x86/boot/compressed/eboot.c

@@ -256,10 +256,10 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
 	int i;
 	struct setup_data *data;
 
-	data = (struct setup_data *)params->hdr.setup_data;
+	data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
 
 	while (data && data->next)
-		data = (struct setup_data *)data->next;
+		data = (struct setup_data *)(unsigned long)data->next;
 
 	status = efi_call_phys5(sys_table->boottime->locate_handle,
 				EFI_LOCATE_BY_PROTOCOL, &pci_proto,
@@ -295,16 +295,18 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
 		if (!pci)
 			continue;
 
+#ifdef CONFIG_X86_64
 		status = efi_call_phys4(pci->attributes, pci,
 					EfiPciIoAttributeOperationGet, 0,
 					&attributes);
-
+#else
+		status = efi_call_phys5(pci->attributes, pci,
+					EfiPciIoAttributeOperationGet, 0, 0,
+					&attributes);
+#endif
 		if (status != EFI_SUCCESS)
 			continue;
 
-		if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM))
-			continue;
-
 		if (!pci->romimage || !pci->romsize)
 			continue;
 
@@ -345,9 +347,9 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
 		memcpy(rom->romdata, pci->romimage, pci->romsize);
 
 		if (data)
-			data->next = (uint64_t)rom;
+			data->next = (unsigned long)rom;
 		else
-			params->hdr.setup_data = (uint64_t)rom;
+			params->hdr.setup_data = (unsigned long)rom;
 
 		data = (struct setup_data *)rom;
 
@@ -432,10 +434,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
 			 * Once we've found a GOP supporting ConOut,
 			 * don't bother looking any further.
 			 */
+			first_gop = gop;
 			if (conout_found)
 				break;
-
-			first_gop = gop;
 		}
 	}
 

arch/x86/boot/compressed/head_32.S

@@ -35,11 +35,11 @@ ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB
 	jmp	preferred_addr
 
-	.balign	0x10
 	/*
 	 * We don't need the return address, so set up the stack so
-	 * efi_main() can find its arugments.
+	 * efi_main() can find its arguments.
 	 */
+ENTRY(efi_pe_entry)
 	add	$0x4, %esp
 
 	call	make_boot_params
@@ -50,8 +50,10 @@ ENTRY(startup_32)
 	pushl	%eax
 	pushl	%esi
 	pushl	%ecx
+	sub	$0x4, %esp
 
-	.org 0x30,0x90
+ENTRY(efi_stub_entry)
+	add	$0x4, %esp
 	call	efi_main
 	cmpl	$0, %eax
 	movl	%eax, %esi

arch/x86/boot/compressed/head_64.S

@@ -201,12 +201,12 @@ ENTRY(startup_64)
 	 */
 #ifdef CONFIG_EFI_STUB
 	/*
-	 * The entry point for the PE/COFF executable is 0x210, so only
-	 * legacy boot loaders will execute this jmp.
+	 * The entry point for the PE/COFF executable is efi_pe_entry, so
+	 * only legacy boot loaders will execute this jmp.
 	 */
 	jmp	preferred_addr
 
-	.org 0x210
+ENTRY(efi_pe_entry)
 	mov	%rcx, %rdi
 	mov	%rdx, %rsi
 	pushq	%rdi
@@ -218,7 +218,7 @@ ENTRY(startup_64)
 	popq	%rsi
 	popq	%rdi
 
-	.org 0x230,0x90
+ENTRY(efi_stub_entry)
 	call	efi_main
 	movq	%rax,%rsi
 	cmpq	$0,%rax