---

yaml
---
r: 179186
b: refs/heads/master
c: 2d13c8f
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5040ab67a2c6d5710ba497dc52a8f7035729d7b0
+refs/heads/master: 2d13c8f0682bd38c74e89a76cc550f0324b610ba

trunk/Documentation/networking/3c509.txt

@@ -48,11 +48,11 @@ for LILO parameters for doing this:
 This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and
 transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts
 with other card types when overriding the I/O address. When the driver is
-loaded as a module, only the IRQ and transceiver setting may be overridden.
-For example, setting two cards to 10base2/IRQ10 and AUI/IRQ11 is done by using
-the xcvr and irq module options:
+loaded as a module, only the IRQ may be overridden. For example,
+setting two cards to IRQ10 and IRQ11 is done by using the irq module
+option:
 
-   options 3c509 xcvr=3,1 irq=10,11
+   options 3c509 irq=10,11
 
 
 (2) Full-duplex mode
@@ -77,6 +77,8 @@ operation.
 itself full-duplex capable. This is almost certainly one of two things: a full-
 duplex-capable  Ethernet switch (*not* a hub), or a full-duplex-capable NIC on
 another system that's connected directly to the 3c509B via a crossover cable.
+
+Full-duplex mode can be enabled using 'ethtool'.
 
 /////Extremely important caution concerning full-duplex mode/////
 Understand that the 3c509B's hardware's full-duplex support is much more
@@ -113,6 +115,8 @@ This insured that merely upgrading the driver from an earlier version would
 never automatically enable full-duplex mode in an existing installation;
 it must always be explicitly enabled via one of these code in order to be
 activated.
+
+The transceiver type can be changed using 'ethtool'.
 
 
 (4a) Interpretation of error messages and common problems

trunk/arch/arm/configs/u300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 17 23:32:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan  6 00:01:36 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -46,6 +46,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -119,14 +120,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -155,6 +183,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -177,6 +206,7 @@ CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -265,12 +295,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
@@ -499,14 +527,21 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -517,6 +552,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -539,6 +575,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -645,7 +682,6 @@ CONFIG_I2C_STU300=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -661,6 +697,8 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PL022=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -708,6 +746,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -716,13 +755,16 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_AB3100_CORE=y
 CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
 # CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_AB3100=y
 # CONFIG_REGULATOR_TPS65023 is not set
@@ -840,7 +882,9 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -882,6 +926,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -911,7 +956,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 CONFIG_RTC_DRV_AB3100=y
 
@@ -926,6 +973,15 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+CONFIG_COH901318=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -1018,7 +1074,7 @@ CONFIG_MISC_FILESYSTEMS=y
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1135,14 +1191,19 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_BINARY_PRINTF is not set
 

trunk/arch/arm/include/asm/cpu.h

@@ -11,6 +11,7 @@
 #define __ASM_ARM_CPU_H
 
 #include <linux/percpu.h>
+#include <linux/cpu.h>
 
 struct cpuinfo_arm {
 	struct cpu	cpu;

trunk/arch/arm/include/asm/dma.h

@@ -138,12 +138,12 @@ extern int  get_dma_residue(unsigned int chan);
 #define NO_DMA	255
 #endif
 
+#endif /* CONFIG_ISA_DMA_API */
+
 #ifdef CONFIG_PCI
 extern int isa_dma_bridge_buggy;
 #else
 #define isa_dma_bridge_buggy    (0)
 #endif
 
-#endif /* CONFIG_ISA_DMA_API */
-
 #endif /* __ASM_ARM_DMA_H */

trunk/arch/arm/include/asm/ptrace.h

@@ -97,9 +97,15 @@
  * stack during a system call.  Note that sizeof(struct pt_regs)
  * has to be a multiple of 8.
  */
+#ifndef __KERNEL__
 struct pt_regs {
 	long uregs[18];
 };
+#else /* __KERNEL__ */
+struct pt_regs {
+	unsigned long uregs[18];
+};
+#endif /* __KERNEL__ */
 
 #define ARM_cpsr	uregs[16]
 #define ARM_pc		uregs[15]

trunk/arch/arm/include/asm/unistd.h

@@ -391,6 +391,7 @@
 #define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 #define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
 #define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
+#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
 
 /*
  * The following SWIs are ARM private.

trunk/arch/arm/kernel/entry-armv.S

@@ -957,9 +957,7 @@ kuser_cmpxchg_fixup:
 
 #else
 
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
-#endif
+	smp_dmb
 1:	ldrex	r3, [r2]
 	subs	r3, r3, r0
 	strexeq	r3, r1, [r2]

trunk/arch/arm/kernel/process.c

@@ -212,7 +212,8 @@ void __show_regs(struct pt_regs *regs)
 	char buf[64];
 
 	printk("CPU: %d    %s  (%s %.*s)\n",
-		smp_processor_id(), print_tainted(), init_utsname()->release,
+		raw_smp_processor_id(), print_tainted(),
+		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
 	print_symbol("PC is at %s\n", instruction_pointer(regs));

trunk/arch/arm/mach-lh7a40x/clocks.c

@@ -10,6 +10,8 @@
 #include <mach/hardware.h>
 #include <mach/clocks.h>
 #include <linux/err.h>
+#include <linux/device.h>
+#include <linux/string.h>
 
 struct module;
 

trunk/arch/arm/mach-pxa/include/mach/hardware.h

@@ -250,20 +250,17 @@
 
 #define cpu_is_pxa930()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa930(id);			\
+		__cpu_is_pxa930(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa935()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa935(id);			\
+		__cpu_is_pxa935(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa950()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa950(id);			\
+		__cpu_is_pxa950(read_cpuid_id());	\
 	 })
 
 

trunk/arch/arm/mach-pxa/magician.c

@@ -381,7 +381,7 @@ static int magician_backlight_init(struct device *dev)
 	return ret;
 }
 
-static int magician_backlight_notify(int brightness)
+static int magician_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
 	if (brightness >= 200) {