---

yaml
---
r: 370664
b: refs/heads/master
c: 415f591
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 15bc1fe67f66644c8093cc2d3304217d1c7de797
+refs/heads/master: 415f59142d9d9dd023deaeb3b4dfc1aecdd3983c

trunk/arch/arm/mach-cns3xxx/Kconfig

@@ -14,6 +14,7 @@ menu "CNS3XXX platform type"
 
 config MACH_CNS3420VB
 	bool "Support for CNS3420 Validation Board"
+	depends on ATAGS
 	help
 	  Include support for the Cavium Networks CNS3420 MPCore Platform
 	  Baseboard.

trunk/arch/arm/mach-cns3xxx/Makefile

@@ -1,3 +1,5 @@
-obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o devices.o
-obj-$(CONFIG_PCI)			+= pcie.o
-obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
+obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
+cns3xxx-y				+= core.o pm.o
+cns3xxx-$(CONFIG_ATAGS)			+= devices.o
+cns3xxx-$(CONFIG_PCI)			+= pcie.o
+cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o

trunk/arch/arm/mach-cns3xxx/core.c

@@ -13,12 +13,18 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/irqchip/arm-gic.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "cns3xxx.h"
 #include "core.h"
+#include "pm.h"
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
 	{
@@ -276,3 +282,116 @@ void __init cns3xxx_l2x0_init(void)
 }
 
 #endif /* CONFIG_CACHE_L2X0 */
+
+static int csn3xxx_usb_power_on(struct platform_device *pdev)
+{
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 *
+	 * Set USB AHB INCR length to 16
+	 */
+	if (atomic_inc_return(&usb_pwr_ref) == 1) {
+		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+			MISC_CHIP_CONFIG_REG);
+	}
+
+	return 0;
+}
+
+static void csn3xxx_usb_power_off(struct platform_device *pdev)
+{
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 */
+	if (atomic_dec_return(&usb_pwr_ref) == 0)
+		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+}
+
+static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
+	.power_on	= csn3xxx_usb_power_on,
+	.power_off	= csn3xxx_usb_power_off,
+};
+
+static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
+	.num_ports	= 1,
+	.power_on	= csn3xxx_usb_power_on,
+	.power_off	= csn3xxx_usb_power_off,
+};
+
+static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
+	{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
+	{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
+	{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
+	{ "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL },
+	{},
+};
+
+static void __init cns3xxx_init(void)
+{
+	struct device_node *dn;
+
+	cns3xxx_l2x0_init();
+
+	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci");
+	if (of_device_is_available(dn)) {
+		u32 tmp;
+
+		tmp = __raw_readl(MISC_SATA_POWER_MODE);
+		tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
+		tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
+		__raw_writel(tmp, MISC_SATA_POWER_MODE);
+
+		/* Enable SATA PHY */
+		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
+		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
+
+		/* Enable SATA Clock */
+		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
+
+		/* De-Asscer SATA Reset */
+		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
+	}
+
+	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
+	if (of_device_is_available(dn)) {
+		u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
+		u32 gpioa_pins = __raw_readl(gpioa);
+
+		/* MMC/SD pins share with GPIOA */
+		gpioa_pins |= 0x1fff0004;
+		__raw_writel(gpioa_pins, gpioa);
+
+		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
+		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
+	}
+
+	pm_power_off = cns3xxx_power_off;
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+                        cns3xxx_auxdata, NULL);
+}
+
+static const char *cns3xxx_dt_compat[] __initdata = {
+	"cavium,cns3410",
+	"cavium,cns3420",
+	NULL,
+};
+
+DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
+	.dt_compat	= cns3xxx_dt_compat,
+	.nr_irqs	= NR_IRQS_CNS3XXX,
+	.map_io		= cns3xxx_map_io,
+	.init_irq	= cns3xxx_init_irq,
+	.init_time	= cns3xxx_timer_init,
+	.init_machine	= cns3xxx_init,
+	.restart	= cns3xxx_restart,
+MACHINE_END