---

yaml
---
r: 264610
b: refs/heads/master
c: e73fc88
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 01f461a3a4321a9f98b6b508f32d2396c5704b7c
+refs/heads/master: e73fc88e19d74fd4dd664cff45b88caab8cde45c

trunk/arch/arm/kernel/head.S

@@ -21,6 +21,7 @@
 #include <asm/memory.h>
 #include <asm/thread_info.h>
 #include <asm/system.h>
+#include <asm/pgtable.h>
 
 #ifdef CONFIG_DEBUG_LL
 #include <mach/debug-macro.S>
@@ -38,11 +39,14 @@
 #error KERNEL_RAM_VADDR must start at 0xXXXX8000
 #endif
 
+#define PG_DIR_SIZE	0x4000
+#define PMD_ORDER	2
+
 	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
+	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
 
 	.macro	pgtbl, rd, phys
-	add	\rd, \phys, #TEXT_OFFSET - 0x4000
+	add	\rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE
 	.endm
 
 #ifdef CONFIG_XIP_KERNEL
@@ -148,11 +152,11 @@ __create_page_tables:
 	pgtbl	r4, r8				@ page table address
 
 	/*
-	 * Clear the 16K level 1 swapper page table
+	 * Clear the swapper page table
 	 */
 	mov	r0, r4
 	mov	r3, #0
-	add	r6, r0, #0x4000
+	add	r6, r0, #PG_DIR_SIZE
 1:	str	r3, [r0], #4
 	str	r3, [r0], #4
 	str	r3, [r0], #4
@@ -171,30 +175,30 @@ __create_page_tables:
 	sub	r0, r0, r3			@ virt->phys offset
 	add	r5, r5, r0			@ phys __enable_mmu
 	add	r6, r6, r0			@ phys __enable_mmu_end
-	mov	r5, r5, lsr #20
-	mov	r6, r6, lsr #20
+	mov	r5, r5, lsr #SECTION_SHIFT
+	mov	r6, r6, lsr #SECTION_SHIFT
 
-1:	orr	r3, r7, r5, lsl #20		@ flags + kernel base
-	str	r3, [r4, r5, lsl #2]		@ identity mapping
-	teq	r5, r6
-	addne	r5, r5, #1			@ next section
-	bne	1b
+1:	orr	r3, r7, r5, lsl #SECTION_SHIFT	@ flags + kernel base
+	str	r3, [r4, r5, lsl #PMD_ORDER]	@ identity mapping
+	cmp	r5, r6
+	addlo	r5, r5, #1			@ next section
+	blo	1b
 
 	/*
 	 * Now setup the pagetables for our kernel direct
 	 * mapped region.
 	 */
 	mov	r3, pc
-	mov	r3, r3, lsr #20
-	orr	r3, r7, r3, lsl #20
-	add	r0, r4,  #(KERNEL_START & 0xff000000) >> 18
-	str	r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
+	mov	r3, r3, lsr #SECTION_SHIFT
+	orr	r3, r7, r3, lsl #SECTION_SHIFT
+	add	r0, r4,  #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
+	str	r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
 	ldr	r6, =(KERNEL_END - 1)
-	add	r0, r0, #4
-	add	r6, r4, r6, lsr #18
+	add	r0, r0, #1 << PMD_ORDER
+	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
 1:	cmp	r0, r6
-	add	r3, r3, #1 << 20
-	strls	r3, [r0], #4
+	add	r3, r3, #1 << SECTION_SHIFT
+	strls	r3, [r0], #1 << PMD_ORDER
 	bls	1b
 
 #ifdef CONFIG_XIP_KERNEL
@@ -203,11 +207,11 @@ __create_page_tables:
 	 */
 	add	r3, r8, #TEXT_OFFSET
 	orr	r3, r3, r7
-	add	r0, r4,  #(KERNEL_RAM_VADDR & 0xff000000) >> 18
-	str	r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
+	add	r0, r4,  #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
+	str	r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]!
 	ldr	r6, =(_end - 1)
 	add	r0, r0, #4
-	add	r6, r4, r6, lsr #18
+	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
 1:	cmp	r0, r6
 	add	r3, r3, #1 << 20
 	strls	r3, [r0], #4
@@ -218,12 +222,12 @@ __create_page_tables:
 	 * Then map boot params address in r2 or
 	 * the first 1MB of ram if boot params address is not specified.
 	 */
-	mov	r0, r2, lsr #20
-	movs	r0, r0, lsl #20
+	mov	r0, r2, lsr #SECTION_SHIFT
+	movs	r0, r0, lsl #SECTION_SHIFT
 	moveq	r0, r8
 	sub	r3, r0, r8
 	add	r3, r3, #PAGE_OFFSET
-	add	r3, r4, r3, lsr #18
+	add	r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
 	orr	r6, r7, r0
 	str	r6, [r3]
 
@@ -236,21 +240,21 @@ __create_page_tables:
 	 */
 	addruart r7, r3
 
-	mov	r3, r3, lsr #20
-	mov	r3, r3, lsl #2
+	mov	r3, r3, lsr #SECTION_SHIFT
+	mov	r3, r3, lsl #PMD_ORDER
 
 	add	r0, r4, r3
 	rsb	r3, r3, #0x4000			@ PTRS_PER_PGD*sizeof(long)
 	cmp	r3, #0x0800			@ limit to 512MB
 	movhi	r3, #0x0800
 	add	r6, r0, r3
-	mov	r3, r7, lsr #20
+	mov	r3, r7, lsr #SECTION_SHIFT
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
-	orr	r3, r7, r3, lsl #20
+	orr	r3, r7, r3, lsl #SECTION_SHIFT
 1:	str	r3, [r0], #4
-	add	r3, r3, #1 << 20
-	teq	r0, r6
-	bne	1b
+	add	r3, r3, #1 << SECTION_SHIFT
+	cmp	r0, r6
+	blo	1b
 
 #else /* CONFIG_DEBUG_ICEDCC */
 	/* we don't need any serial debugging mappings for ICEDCC */
@@ -262,7 +266,7 @@ __create_page_tables:
 	 * If we're using the NetWinder or CATS, we also need to map
 	 * in the 16550-type serial port for the debug messages
 	 */
-	add	r0, r4, #0xff000000 >> 18
+	add	r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
 	orr	r3, r7, #0x7c000000
 	str	r3, [r0]
 #endif
@@ -272,10 +276,10 @@ __create_page_tables:
 	 * Similar reasons here - for debug.  This is
 	 * only for Acorn RiscPC architectures.
 	 */
-	add	r0, r4, #0x02000000 >> 18
+	add	r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
 	orr	r3, r7, #0x02000000
 	str	r3, [r0]
-	add	r0, r4, #0xd8000000 >> 18
+	add	r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
 	str	r3, [r0]
 #endif
 #endif

trunk/arch/arm/kernel/module.c

@@ -33,7 +33,7 @@
  * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
  */
 #undef MODULES_VADDR
-#define MODULES_VADDR	(((unsigned long)_etext + ~PGDIR_MASK) & PGDIR_MASK)
+#define MODULES_VADDR	(((unsigned long)_etext + ~PMD_MASK) & PMD_MASK)
 #endif
 
 #ifdef CONFIG_MMU

trunk/arch/arm/mm/dma-mapping.c

@@ -123,8 +123,8 @@ static void __dma_free_buffer(struct page *page, size_t size)
 #endif
 
 #define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PMD_SHIFT)
+#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PMD_SHIFT)
 
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
@@ -183,7 +183,7 @@ static int __init consistent_init(void)
 		}
 
 		consistent_pte[i++] = pte;
-		base += (1 << PGDIR_SHIFT);
+		base += PMD_SIZE;
 	} while (base < CONSISTENT_END);
 
 	return ret;

trunk/arch/arm/mm/mmu.c

@@ -863,14 +863,14 @@ static inline void prepare_page_table(void)
 	/*
 	 * Clear out all the mappings below the kernel image.
 	 */
-	for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
+	for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
 #ifdef CONFIG_XIP_KERNEL
 	/* The XIP kernel is mapped in the module area -- skip over it */
-	addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+	addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
 #endif
-	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+	for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
 	/*
@@ -885,10 +885,12 @@ static inline void prepare_page_table(void)
 	 * memory bank, up to the end of the vmalloc region.
 	 */
 	for (addr = __phys_to_virt(end);
-	     addr < VMALLOC_END; addr += PGDIR_SIZE)
+	     addr < VMALLOC_END; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 }
 
+#define SWAPPER_PG_DIR_SIZE	(PTRS_PER_PGD * sizeof(pgd_t))
+
 /*
  * Reserve the special regions of memory
  */
@@ -898,7 +900,7 @@ void __init arm_mm_memblock_reserve(void)
 	 * Reserve the page tables.  These are already in use,
 	 * and can only be in node 0.
 	 */
-	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
+	memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE);
 
 #ifdef CONFIG_SA1111
 	/*
@@ -926,7 +928,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	 */
 	vectors_page = early_alloc(PAGE_SIZE);
 
-	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+	for (addr = VMALLOC_END; addr; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
 	/*