Merge tag 'imx-dt-3.10' of git://git.linaro.org/people/shawnguo/linux…

…-2.6 into next/dt

From Shawn Guo:
The imx device tree changes for 3.10:

* The huge diff stat is introduced by the pinctrl changes.  With DTC
  macro support ready, we're moving those huge mount of data about pins
  out of pinctrl driver.
* Device tree source updates for GPI, LDB, SRC, cpufreq-cpu0.
* Initial imx6dl device tree support
* Board level DTS changes for some imx27 and imx51 platforms.

* tag 'imx-dt-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (605 commits)
  ARM: dts: imx6dl-wandboard: Add USB Host support
  ARM: dts: imx51 cpu node
  ARM: dts: Add missing imx27-phytec-phycore dtb target
  ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module
  ARM: i.MX51: Add PATA support
  ARM: dts: Add initial support for Wandboard Dual-Lite
  ARM: dts: imx: add initial imx6dl-sabreauto support
  ARM: dts: imx: add initial imx6dl-sabresd support
  ARM: dts: imx: make sabreauto and sabresd common
  pinctrl: add pinctrl driver for imx6sl
  pinctrl: add pinctrl driver for imx6dl
  ARM: dts: imx53: fix SD2_DATA1 pad AUDMUX_AUD4 configuration
  ARM: dts: MicroSys sbc6x support (i.MX6)
  ARM i.MX5: Add System Reset Controller (SRC) support for i.MX51 and i.MX53
  ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree
  ARM i.MX6q: Link system reset controller (SRC) to IPU in DT
  ARM i.MX6q: Add LDB device to device tree
  ARM: imx5 DT init cpufreq-cpu0 device
  ARM: imx27 DT init cpufreq-cpu0 device
  ARM i.MX53: Add LDB device to device tree
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

CREDITS

@@ -1510,6 +1510,14 @@ D: Natsemi ethernet
 D: Cobalt Networks (x86) support
 D: This-and-That
 
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project

Documentation/devicetree/bindings/clock/imx27-clock.txt

@@ -0,0 +1,117 @@
+* Clock bindings for Freescale i.MX27
+
+Required properties:
+- compatible: Should be "fsl,imx27-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX27
+clocks and IDs.
+
+	Clock		    ID
+	-----------------------
+	dummy                0
+	ckih                 1
+	ckil                 2
+	mpll                 3
+	spll                 4
+	mpll_main2           5
+	ahb                  6
+	ipg                  7
+	nfc_div              8
+	per1_div             9
+	per2_div             10
+	per3_div             11
+	per4_div             12
+	vpu_sel              13
+	vpu_div              14
+	usb_div              15
+	cpu_sel              16
+	clko_sel             17
+	cpu_div              18
+	clko_div             19
+	ssi1_sel             20
+	ssi2_sel             21
+	ssi1_div             22
+	ssi2_div             23
+	clko_en              24
+	ssi2_ipg_gate        25
+	ssi1_ipg_gate        26
+	slcdc_ipg_gate       27
+	sdhc3_ipg_gate       28
+	sdhc2_ipg_gate       29
+	sdhc1_ipg_gate       30
+	scc_ipg_gate         31
+	sahara_ipg_gate      32
+	rtc_ipg_gate         33
+	pwm_ipg_gate         34
+	owire_ipg_gate       35
+	lcdc_ipg_gate        36
+	kpp_ipg_gate         37
+	iim_ipg_gate         38
+	i2c2_ipg_gate        39
+	i2c1_ipg_gate        40
+	gpt6_ipg_gate        41
+	gpt5_ipg_gate        42
+	gpt4_ipg_gate        43
+	gpt3_ipg_gate        44
+	gpt2_ipg_gate        45
+	gpt1_ipg_gate        46
+	gpio_ipg_gate        47
+	fec_ipg_gate         48
+	emma_ipg_gate        49
+	dma_ipg_gate         50
+	cspi3_ipg_gate       51
+	cspi2_ipg_gate       52
+	cspi1_ipg_gate       53
+	nfc_baud_gate        54
+	ssi2_baud_gate       55
+	ssi1_baud_gate       56
+	vpu_baud_gate        57
+	per4_gate            58
+	per3_gate            59
+	per2_gate            60
+	per1_gate            61
+	usb_ahb_gate         62
+	slcdc_ahb_gate       63
+	sahara_ahb_gate      64
+	lcdc_ahb_gate        65
+	vpu_ahb_gate         66
+	fec_ahb_gate         67
+	emma_ahb_gate        68
+	emi_ahb_gate         69
+	dma_ahb_gate         70
+	csi_ahb_gate         71
+	brom_ahb_gate        72
+	ata_ahb_gate         73
+	wdog_ipg_gate        74
+	usb_ipg_gate         75
+	uart6_ipg_gate       76
+	uart5_ipg_gate       77
+	uart4_ipg_gate       78
+	uart3_ipg_gate       79
+	uart2_ipg_gate       80
+	uart1_ipg_gate       81
+	ckih_div1p5          82
+	fpm                  83
+	mpll_osc_sel         84
+	mpll_sel             85
+
+Examples:
+
+clks: ccm@10027000{
+	compatible = "fsl,imx27-ccm";
+	reg = <0x10027000 0x1000>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@1000a000 {
+	compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+	reg = <0x1000a000 0x1000>;
+	interrupts = <20>;
+	clocks = <&clks 81>, <&clks 61>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};

Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt

@@ -24,9 +24,9 @@ Required properties for iomux controller:
 Required properties for pin configuration node:
 - fsl,pins: two integers array, represents a group of pins mux and config
   setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up on this pin. Please refer to fsl,<soc>-pinctrl.txt for the valid
-  pins and functions of each SoC.
+  pin working on a specific function, which consists of a tuple of
+  <mux_reg conf_reg input_reg mux_val input_val>.  CONFIG is the pad setting
+  value like pull-up on this pin.
 
 Bits used for CONFIG:
 NO_PAD_CTL(1 << 31): indicate this pin does not need config.