---

yaml
---
r: 72230
b: refs/heads/master
c: 8a53514
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e5eca6aef6a2a57e433db1eac247d2d1c213ce08
+refs/heads/master: 8a53514043e380aa573baa805298a7727c993985

trunk/Documentation/feature-removal-schedule.txt

@@ -14,6 +14,18 @@ Who:	Jiri Slaby <jirislaby@gmail.com>
 
 ---------------------------
 
+What:	V4L2 VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP
+When:	October 2007
+Why:	Broken attempt to set MPEG compression parameters. These ioctls are
+	not able to implement the wide variety of parameters that can be set
+	by hardware MPEG encoders. A new MPEG control mechanism was created
+	in kernel 2.6.18 that replaces these ioctls. See the V4L2 specification
+	(section 1.9: Extended controls) for more information on this topic.
+Who:	Hans Verkuil <hverkuil@xs4all.nl> and
+	Mauro Carvalho Chehab <mchehab@infradead.org>
+
+---------------------------
+
 What:	dev->power.power_state
 When:	July 2007
 Why:	Broken design for runtime control over driver power states, confusing
@@ -37,10 +49,10 @@ Who:	David Miller <davem@davemloft.net>
 ---------------------------
 
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When:	December 2008
-Files:	include/linux/video_decoder.h include/linux/videodev.h
-Check:	include/linux/video_decoder.h include/linux/videodev.h
-Why:	V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
+When:	December 2006
+Files:	include/linux/video_decoder.h
+Check:	include/linux/video_decoder.h
+Why:	V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
 	series. The old API have lots of drawbacks and don't provide enough
 	means to work with all video and audio standards. The newer API is
 	already available on the main drivers and should be used instead.
@@ -49,9 +61,7 @@ Why:	V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
 	Decoder iocts are using internally to allow video drivers to
 	communicate with video decoders. This should also be improved to allow
 	V4L2 calls being translated into compatible internal ioctls.
-	Compatibility ioctls will be provided, for a while, via 
-	v4l1-compat module. 
-Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
+Who:	Mauro Carvalho Chehab <mchehab@brturbo.com.br>
 
 ---------------------------
 

trunk/Documentation/filesystems/Exporting

@@ -2,12 +2,9 @@
 Making Filesystems Exportable
 =============================
 
-Overview
---------
-
-All filesystem operations require a dentry (or two) as a starting
+Most filesystem operations require a dentry (or two) as a starting
 point.  Local applications have a reference-counted hold on suitable
-dentries via open file descriptors or cwd/root.  However remote
+dentrys via open file descriptors or cwd/root.  However remote
 applications that access a filesystem via a remote filesystem protocol
 such as NFS may not be able to hold such a reference, and so need a
 different way to refer to a particular dentry.  As the alternative
@@ -16,14 +13,14 @@ server-reboot (among other things, though these tend to be the most
 problematic), there is no simple answer like 'filename'.
 
 The mechanism discussed here allows each filesystem implementation to
-specify how to generate an opaque (outside of the filesystem) byte
+specify how to generate an opaque (out side of the filesystem) byte
 string for any dentry, and how to find an appropriate dentry for any
 given opaque byte string.
 This byte string will be called a "filehandle fragment" as it
 corresponds to part of an NFS filehandle.
 
 A filesystem which supports the mapping between filehandle fragments
-and dentries will be termed "exportable".
+and dentrys will be termed "exportable".
 
 
 
@@ -92,49 +89,79 @@ For a filesystem to be exportable it must:
    1/ provide the filehandle fragment routines described below.
    2/ make sure that d_splice_alias is used rather than d_add
       when ->lookup finds an inode for a given parent and name.
-      Typically the ->lookup routine will end with a:
-
-		return d_splice_alias(inode, dentry);
+      Typically the ->lookup routine will end:
+		if (inode)
+			return d_splice(inode, dentry);
+		d_add(dentry, inode);
+		return NULL;
 	}
 
 
 
   A file system implementation declares that instances of the filesystem
 are exportable by setting the s_export_op field in the struct
 super_block.  This field must point to a "struct export_operations"
-struct which has the following members:
-
- encode_fh  (optional)
-    Takes a dentry and creates a filehandle fragment which can later be used
-    to find or create a dentry for the same object.  The default
-    implementation creates a filehandle fragment that encodes a 32bit inode
-    and generation number for the inode encoded, and if necessary the
-    same information for the parent.
-
-  fh_to_dentry (mandatory)
-    Given a filehandle fragment, this should find the implied object and
-    create a dentry for it (possibly with d_alloc_anon).
-
-  fh_to_parent (optional but strongly recommended)
-    Given a filehandle fragment, this should find the parent of the
-    implied object and create a dentry for it (possibly with d_alloc_anon).
-    May fail if the filehandle fragment is too small.
-
-  get_parent (optional but strongly recommended)
-    When given a dentry for a directory, this should return  a dentry for
-    the parent.  Quite possibly the parent dentry will have been allocated
-    by d_alloc_anon.  The default get_parent function just returns an error
-    so any filehandle lookup that requires finding a parent will fail.
-    ->lookup("..") is *not* used as a default as it can leave ".." entries
-    in the dcache which are too messy to work with.
-
-  get_name (optional)
-    When given a parent dentry and a child dentry, this should find a name
-    in the directory identified by the parent dentry, which leads to the
-    object identified by the child dentry.  If no get_name function is
-    supplied, a default implementation is provided which uses vfs_readdir
-    to find potential names, and matches inode numbers to find the correct
-    match.
+struct which could potentially be full of NULLs, though normally at
+least get_parent will be set.
+
+ The primary operations are decode_fh and encode_fh.  
+decode_fh takes a filehandle fragment and tries to find or create a
+dentry for the object referred to by the filehandle.
+encode_fh takes a dentry and creates a filehandle fragment which can
+later be used to find/create a dentry for the same object.
+
+decode_fh will probably make use of "find_exported_dentry".
+This function lives in the "exportfs" module which a filesystem does
+not need unless it is being exported.  So rather that calling
+find_exported_dentry directly, each filesystem should call it through
+the find_exported_dentry pointer in it's export_operations table.
+This field is set correctly by the exporting agent (e.g. nfsd) when a
+filesystem is exported, and before any export operations are called.
+
+find_exported_dentry needs three support functions from the
+filesystem:
+  get_name.  When given a parent dentry and a child dentry, this
+    should find a name in the directory identified by the parent
+    dentry, which leads to the object identified by the child dentry.
+    If no get_name function is supplied, a default implementation is
+    provided which uses vfs_readdir to find potential names, and
+    matches inode numbers to find the correct match.
+
+  get_parent.  When given a dentry for a directory, this should return 
+    a dentry for the parent.  Quite possibly the parent dentry will
+    have been allocated by d_alloc_anon.  
+    The default get_parent function just returns an error so any
+    filehandle lookup that requires finding a parent will fail.
+    ->lookup("..") is *not* used as a default as it can leave ".."
+    entries in the dcache which are too messy to work with.
+
+  get_dentry.  When given an opaque datum, this should find the
+    implied object and create a dentry for it (possibly with
+    d_alloc_anon). 
+    The opaque datum is whatever is passed down by the decode_fh
+    function, and is often simply a fragment of the filehandle
+    fragment.
+    decode_fh passes two datums through find_exported_dentry.  One that 
+    should be used to identify the target object, and one that can be
+    used to identify the object's parent, should that be necessary.
+    The default get_dentry function assumes that the datum contains an
+    inode number and a generation number, and it attempts to get the
+    inode using "iget" and check it's validity by matching the
+    generation number.  A filesystem should only depend on the default
+    if iget can safely be used this way.
+
+If decode_fh and/or encode_fh are left as NULL, then default
+implementations are used.  These defaults are suitable for ext2 and 
+extremely similar filesystems (like ext3).
+
+The default encode_fh creates a filehandle fragment from the inode
+number and generation number of the target together with the inode
+number and generation number of the parent (if the parent is
+required).
+
+The default decode_fh extract the target and parent datums from the
+filehandle assuming the format used by the default encode_fh and
+passed them to find_exported_dentry.
 
 
 A filehandle fragment consists of an array of 1 or more 4byte words,
@@ -145,3 +172,5 @@ generated by encode_fh, in which case it will have been padded with
 nuls.  Rather, the encode_fh routine should choose a "type" which
 indicates the decode_fh how much of the filehandle is valid, and how
 it should be interpreted.
+
+

trunk/Documentation/i386/boot.txt

@@ -168,8 +168,6 @@ Offset	Proto	Name		Meaning
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/3	N/A	pad2		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
-023C/4	2.07+	hardware_subarch Hardware subarchitecture
-0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
 
 (1) For backwards compatibility, if the setup_sects field contains 0, the
     real value is 4.
@@ -206,7 +204,7 @@ boot loaders can ignore those fields.
 
 The byte order of all fields is littleendian (this is x86, after all.)
 
-Field name:	setup_sects
+Field name:	setup_secs
 Type:		read
 Offset/size:	0x1f1/1
 Protocol:	ALL
@@ -358,13 +356,6 @@ Protocol:	2.00+
 	- If 0, the protected-mode code is loaded at 0x10000.
 	- If 1, the protected-mode code is loaded at 0x100000.
 
-  Bit 6 (write): KEEP_SEGMENTS
-	Protocol: 2.07+
-	- if 0, reload the segment registers in the 32bit entry point.
-	- if 1, do not reload the segment registers in the 32bit entry point.
-		Assume that %cs %ds %ss %es are all set to flat segments with
-		a base of 0 (or the equivalent for their environment).
-
   Bit 7 (write): CAN_USE_HEAP
 	Set this bit to 1 to indicate that the value entered in the
 	heap_end_ptr is valid.  If this field is clear, some setup code
@@ -489,29 +480,6 @@ Protocol:	2.06+
   cmdline_size characters. With protocol version 2.05 and earlier, the
   maximum size was 255.
 
-Field name:	hardware_subarch
-Type:		write
-Offset/size:	0x23c/4
-Protocol:	2.07+
-
-  In a paravirtualized environment the hardware low level architectural
-  pieces such as interrupt handling, page table handling, and
-  accessing process control registers needs to be done differently.
-
-  This field allows the bootloader to inform the kernel we are in one
-  one of those environments.
-
-  0x00000000	The default x86/PC environment
-  0x00000001	lguest
-  0x00000002	Xen
-
-Field name:	hardware_subarch_data
-Type:		write
-Offset/size:	0x240/8
-Protocol:	2.07+
-
-  A pointer to data that is specific to hardware subarch
-
 
 **** THE KERNEL COMMAND LINE